NCE: C++ ftw

NCE: I hate asm btw
2026-08-28 15:31:12 +02:00 · 2025-05-23 21:47:37 -03:00 · 2025-05-23 21:10:40 -03:00
4458 changed files with 42807 additions and 1258474 deletions
@@ -5,10 +5,10 @@

 export NDK_CCACHE=$(which ccache)

-if [ ! -z "${ANDROID_KEYSTORE_B64}" ]; then
-    export ANDROID_KEYSTORE_FILE="${GITHUB_WORKSPACE}/ks.jks"
-    base64 --decode <<< "${ANDROID_KEYSTORE_B64}" > "${ANDROID_KEYSTORE_FILE}"
-fi
+# keystore & pass are stored locally
+export ANDROID_KEYSTORE_FILE=~/android.keystore
+export ANDROID_KEYSTORE_PASS=`cat ~/android.pass`
+export ANDROID_KEY_ALIAS=`cat ~/android.alias`

 cd src/android
 chmod +x ./gradlew
@@ -16,6 +16,4 @@ chmod +x ./gradlew
 ./gradlew assembleRelease
 ./gradlew bundleRelease

-if [ ! -z "${ANDROID_KEYSTORE_B64}" ]; then
-    rm "${ANDROID_KEYSTORE_FILE}"
-fi
+ccache -s -v
@@ -2,7 +2,7 @@
 # frozen_string_literal: true

 license_header = <<~EOF
-      // SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
+      // SPDX-FileCopyrightText: Copyright yuzu/Citra Emulator Project / Eden Emulator Project
      // SPDX-License-Identifier: GPL-3.0-or-later
      EOF

@@ -1,84 +0,0 @@
-#!/bin/sh -e
-
-HEADER="$(cat "$PWD/.ci/license/header.txt")"
-
-echo "Getting branch changes"
-
-BRANCH=`git rev-parse --abbrev-ref HEAD`
-COMMITS=`git log ${BRANCH} --not master --pretty=format:"%h"`
-RANGE="${COMMITS[${#COMMITS[@]}-1]}^..${COMMITS[0]}"
-FILES=`git diff-tree --no-commit-id --name-only ${RANGE} -r`
-
-#FILES=$(git diff --name-only master)
-
-echo "Done"
-
-for file in $FILES; do
-    EXTENSION="${file##*.}"
-    case "$EXTENSION" in
-        kts|kt|cpp|h)
-            CONTENT="`cat $file`"
-            case "$CONTENT" in
-                "$HEADER"*) ;;
-                *) BAD_FILES="$BAD_FILES $file" ;;
-            esac
-            ;;
-    esac
-done
-
-if [ "$BAD_FILES" = "" ]; then
-    echo
-    echo "All good."
-
-    exit
-fi
-
-echo "The following files have incorrect license headers:"
-echo
-
-for file in $BAD_FILES; do echo $file; done
-
-cat << EOF
-
-The following license header should be added to the start of all offending files:
-
-=== BEGIN ===
-$HEADER
-===  END  ===
-
-If some of the code in this PR is not being contributed by the original author,
-the files which have been exclusively changed by that code can be ignored.
-If this happens, this PR requirement can be bypassed once all other files are addressed.
-EOF
-
-if [ "$FIX" = "true" ]; then
-    echo
-    echo "FIX set to true. Fixing headers."
-    echo
-
-    for file in $BAD_FILES; do
-        cat $file > $file.bak
-
-        cat .ci/license/header.txt > $file
-        echo >> $file
-        cat $file.bak >> $file
-
-        rm $file.bak
-
-        git add $file
-    done
-
-    echo "License headers fixed."
-
-    if [ "$COMMIT" = "true" ]; then
-        echo
-        echo "COMMIT set to true. Committing changes."
-        echo
-
-        git commit -m "Fix license headers"
-
-        echo "Changes committed. You may now push."
-    fi
-else
-    exit 1
-fi
@@ -1,2 +0,0 @@
-// SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
-// SPDX-License-Identifier: GPL-3.0-or-later
@@ -1,83 +1,69 @@
-#!/bin/bash -e
+#!/bin/bash -ex

 # SPDX-FileCopyrightText: 2025 eden Emulator Project
 # SPDX-License-Identifier: GPL-3.0-or-later

 export ARCH="$(uname -m)"

-case "$1" in
-    amd64|"")
-        echo "Making amd64-v3 optimized build of Eden"
-        ARCH="amd64_v3"
-        ARCH_FLAGS="-march=x86-64-v3"
-        ;;
-    steamdeck)
-        echo "Making Steam Deck (Zen 2) optimized build of Eden"
-        ARCH="steamdeck"
-        ARCH_FLAGS="-march=znver2 -mtune=znver2"
-        ;;
-    rog-ally|allyx)
-        echo "Making ROG Ally X (Zen 4) optimized build of Eden"
-        ARCH="rog-ally-x"
-        ARCH_FLAGS="-march=znver3 -mtune=znver4" # GH actions runner is a Zen 3 CPU, so a small workaround
-        ;;
-    legacy)
-        echo "Making amd64 generic build of Eden"
-        ARCH=amd64
-        ARCH_FLAGS="-march=x86-64 -mtune=generic"
-        ;;
-    aarch64)
-        echo "Making armv8-a build of Eden"
-        ARCH=aarch64
-        ARCH_FLAGS="-march=armv8-a -mtune=generic -w"
-        ;;
-    armv9)
-        echo "Making armv9-a build of Eden"
-        ARCH=armv9
-        ARCH_FLAGS="-march=armv9-a -mtune=generic -w"
-        ;;
-esac
-
-export ARCH_FLAGS="$ARCH_FLAGS -O3"
+if [ "$ARCH" = 'x86_64' ]; then
+	if [ "$1" = 'v3' ]; then
+		echo "Making x86-64-v3 optimized build of eden"
+		ARCH="${ARCH}_v3"
+		ARCH_FLAGS="-march=x86-64-v3 -O3"
+	else
+		echo "Making x86-64 generic build of eden"
+		ARCH_FLAGS="-march=x86-64 -mtune=generic -O3"
+	fi
+else
+	echo "Making aarch64 build of eden"
+	ARCH_FLAGS="-march=armv8-a -mtune=generic -O3"
+fi

 NPROC="$2"
 if [ -z "$NPROC" ]; then
    NPROC="$(nproc)"
-else
-    shift
 fi

-if [ "$1" != "" ]; then shift; fi
-
 if [ "$TARGET" = "appimage" ]; then
-    export EXTRA_CMAKE_FLAGS=(-DCMAKE_INSTALL_PREFIX=/usr -DYUZU_ROOM=ON -DYUZU_ROOM_STANDALONE=OFF -DYUZU_CMD=OFF)
+    # Compile the AppImage we distribute with Clang.
+    export EXTRA_CMAKE_FLAGS=(-DCMAKE_CXX_COMPILER=clang++ -DCMAKE_C_COMPILER=clang -DCMAKE_LINKER=/etc/bin/ld.lld)
+    # Bundle required QT wayland libraries
+    export EXTRA_QT_PLUGINS="waylandcompositor"
+    export EXTRA_PLATFORM_PLUGINS="libqwayland-egl.so;libqwayland-generic.so"
 else
    # For the linux-fresh verification target, verify compilation without PCH as well.
-    export EXTRA_CMAKE_FLAGS=(-DYUZU_USE_PRECOMPILED_HEADERS=OFF)
+    export EXTRA_CMAKE_FLAGS=(-DCITRA_USE_PRECOMPILED_HEADERS=OFF)
 fi

-if [ "$DEVEL" != "true" ]; then
-    export EXTRA_CMAKE_FLAGS=("${EXTRA_CMAKE_FLAGS[@]}" -DENABLE_QT_UPDATE_CHECKER=ON)
+if [ "$GITHUB_REF_TYPE" == "tag" ]; then
+	export EXTRA_CMAKE_FLAGS=($EXTRA_CMAKE_FLAGS -DENABLE_QT_UPDATE_CHECKER=ON)
 fi

-export EXTRA_CMAKE_FLAGS=("${EXTRA_CMAKE_FLAGS[@]}" $@)
-
 mkdir -p build && cd build
 cmake .. -G Ninja \
    -DCMAKE_BUILD_TYPE=Release \
-	-DENABLE_QT_TRANSLATION=ON \
+    -DCMAKE_C_COMPILER_LAUNCHER=ccache \
+    -DCMAKE_CXX_COMPILER_LAUNCHER=ccache \
+    -DENABLE_QT_TRANSLATION=ON \
    -DUSE_DISCORD_PRESENCE=ON \
+    -DUSE_CCACHE=ON \
    -DCMAKE_CXX_FLAGS="$ARCH_FLAGS" \
    -DCMAKE_C_FLAGS="$ARCH_FLAGS" \
    -DYUZU_USE_BUNDLED_VCPKG=OFF \
    -DYUZU_USE_BUNDLED_QT=OFF \
+    -DUSE_SYSTEM_QT=ON \
+    -DYUZU_USE_BUNDLED_FFMPEG=OFF \
    -DYUZU_USE_BUNDLED_SDL2=OFF \
    -DYUZU_USE_EXTERNAL_SDL2=ON \
    -DYUZU_TESTS=OFF \
-    -DYUZU_USE_QT_MULTIMEDIA=ON \
-    -DYUZU_USE_QT_WEB_ENGINE=ON \
-    -DYUZU_USE_FASTER_LD=ON \
+    -DYUZU_USE_LLVM_DEMANGLE=OFF \
+    -DYUZU_USE_QT_MULTIMEDIA=OFF \
+    -DYUZU_USE_QT_WEB_ENGINE=OFF \
+    -DENABLE_QT_TRANSLATION=ON \
+    -DUSE_DISCORD_PRESENCE=OFF \
+    -DYUZU_USE_FASTER_LD=OFF \
    -DYUZU_ENABLE_LTO=ON \
+    -DCMAKE_LINKER=/usr/bin/mold \
 	"${EXTRA_CMAKE_FLAGS[@]}"

 ninja -j${NPROC}
@@ -87,3 +73,11 @@ if [ -d "bin/Release" ]; then
 else
  strip -s bin/*
 fi
+
+if [ "$TARGET" = "appimage" ]; then
+    ccache -s
+else
+    ccache -s -v
+fi
+
+#ctest -VV -C Release
@@ -1,150 +1,219 @@
 AppRun
-eden.desktop
 org.eden_emu.eden.desktop
-shared/bin/eden
+bin/eden
 shared/lib/lib.path
 shared/lib/ld-linux-x86-64.so.2
-shared/lib/libQt6Widgets.so.6.4.2
-shared/lib/libQt6DBus.so.6.4.2
-shared/lib/libudev.so.1.7.5
-shared/lib/libbrotlienc.so.1.0.9
-shared/lib/libbrotlidec.so.1.0.9
+shared/lib/libQt6Widgets.so.6.9.0
+shared/lib/libQt6Network.so.6.9.0
+shared/lib/libusb-1.0.so.0.5.0
+shared/lib/libenet.so.7.0.6
+shared/lib/libbrotlicommon.so.1.1.0
+shared/lib/libbrotlienc.so.1.1.0
+shared/lib/libbrotlidec.so.1.1.0
+shared/lib/libz.so.1.3.1
 shared/lib/libssl.so.3
 shared/lib/libcrypto.so.3
-shared/lib/libavcodec.so.59.37.100
-shared/lib/libavutil.so.57.28.100
-shared/lib/libQt6Gui.so.6.4.2
-shared/lib/libQt6Core.so.6.4.2
-shared/lib/libstdc++.so.6.0.30
+shared/lib/libavcodec.so.61.19.100
+shared/lib/libavdevice.so.61.3.100
+shared/lib/libavfilter.so.10.4.100
+shared/lib/libavformat.so.61.7.100
+shared/lib/libavutil.so.59.39.100
+shared/lib/libswresample.so.5.3.100
+shared/lib/libswscale.so.8.3.100
+shared/lib/libva.so.2.2200.0
+shared/lib/libboost_context.so.1.87.0
+shared/lib/liblz4.so.1.10.0
+shared/lib/libzstd.so.1.5.7
+shared/lib/libSDL2-2.0.so.0.3200.54
+shared/lib/libfmt.so.11.1.4
+shared/lib/libopus.so.0.10.1
+shared/lib/libQt6Gui.so.6.9.0
+shared/lib/libQt6DBus.so.6.9.0
+shared/lib/libGLX.so.0.0.0
+shared/lib/libOpenGL.so.0.0.0
+shared/lib/libQt6Core.so.6.9.0
+shared/lib/libstdc++.so.6.0.33
 shared/lib/libm.so.6
 shared/lib/libgcc_s.so.1
 shared/lib/libc.so.6
-shared/lib/libdbus-1.so.3.32.4
-shared/lib/libbrotlicommon.so.1.0.9
-shared/lib/libswresample.so.4.7.100
-shared/lib/libvpx.so.7.1.0
-shared/lib/libwebpmux.so.3.0.10
-shared/lib/libwebp.so.7.1.5
-shared/lib/liblzma.so.5.4.1
-shared/lib/libdav1d.so.6.6.0
-shared/lib/librsvg-2.so.2.48.0
-shared/lib/libgobject-2.0.so.0.7400.6
-shared/lib/libglib-2.0.so.0.7400.6
-shared/lib/libcairo.so.2.11600.0
-shared/lib/libzvbi.so.0.13.2
-shared/lib/libz.so.1.2.13
-shared/lib/libsnappy.so.1.1.9
-shared/lib/libaom.so.3.6.0
-shared/lib/libcodec2.so.1.0
-shared/lib/libgsm.so.1.0.19
-shared/lib/libjxl.so.0.7.0
-shared/lib/libjxl_threads.so.0.7.0
+shared/lib/libgssapi_krb5.so.2.2
+shared/lib/libproxy.so.0.5.9
+shared/lib/libudev.so.1.7.10
+shared/lib/libvpx.so.9.1.0
+shared/lib/libwebpmux.so.3.1.1
+shared/lib/liblzma.so.5.8.1
+shared/lib/libdav1d.so.7.0.0
+shared/lib/libopencore-amrwb.so.0.0.5
+shared/lib/librsvg-2.so.2.60.0
+shared/lib/libcairo.so.2.11804.4
+shared/lib/libgobject-2.0.so.0.8400.1
+shared/lib/libglib-2.0.so.0.8400.1
+shared/lib/libsnappy.so.1.2.2
+shared/lib/libaom.so.3.12.0
+shared/lib/libgsm.so.1.0.22
+shared/lib/libjxl.so.0.11.1
+shared/lib/libjxl_threads.so.0.11.1
 shared/lib/libmp3lame.so.0.0.0
-shared/lib/libopenjp2.so.2.5.0
-shared/lib/libopus.so.0.8.0
-shared/lib/librav1e.so.0.5.1
-shared/lib/libshine.so.3.0.1
+shared/lib/libopencore-amrnb.so.0.0.5
+shared/lib/libopenjp2.so.2.5.3
 shared/lib/libspeex.so.1.5.2
-shared/lib/libSvtAv1Enc.so.1.4.1
 shared/lib/libtheoraenc.so.1.1.2
 shared/lib/libtheoradec.so.1.1.4
-shared/lib/libtwolame.so.0.0.0
 shared/lib/libvorbis.so.0.4.9
 shared/lib/libvorbisenc.so.2.0.12
+shared/lib/libwebp.so.7.1.10
 shared/lib/libx264.so.164
-shared/lib/libx265.so.199
 shared/lib/libxvidcore.so.4.3
-shared/lib/libva.so.2.1700.0
-shared/lib/libmfx.so.1.35
-shared/lib/libva-drm.so.2.1700.0
-shared/lib/libva-x11.so.2.1700.0
-shared/lib/libvdpau.so.1.0.0
-shared/lib/libX11.so.6.4.0
-shared/lib/libdrm.so.2.4.0
-shared/lib/libOpenCL.so.1.0.0
-shared/lib/libEGL.so.1.1.0
-shared/lib/libfontconfig.so.1.12.0
-shared/lib/libxkbcommon.so.0.0.0
-shared/lib/libGLX.so.0.0.0
-shared/lib/libOpenGL.so.0.0.0
-shared/lib/libpng16.so.16.39.0
-shared/lib/libharfbuzz.so.0.60000.0
-shared/lib/libmd4c.so.0.4.8
-shared/lib/libfreetype.so.6.18.3
-shared/lib/libicui18n.so.72.1
-shared/lib/libicuuc.so.72.1
-shared/lib/libdouble-conversion.so.3.1
-shared/lib/libb2.so.1.0.4
-shared/lib/libpcre2-16.so.0.11.2
-shared/lib/libzstd.so.1.5.4
-shared/lib/libsystemd.so.0.35.0
-shared/lib/libsoxr.so.0.1.2
-shared/lib/libcairo-gobject.so.2.11600.0
-shared/lib/libgdk_pixbuf-2.0.so.0.4200.10
-shared/lib/libgio-2.0.so.0.7400.6
-shared/lib/libxml2.so.2.9.14
-shared/lib/libpangocairo-1.0.so.0.5000.12
-shared/lib/libpango-1.0.so.0.5000.12
-shared/lib/libffi.so.8.1.2
-shared/lib/libpcre2-8.so.0.11.2
-shared/lib/libpixman-1.so.0.42.2
-shared/lib/libxcb-shm.so.0.0.0
+shared/lib/libvpl.so.2.14
+shared/lib/libraw1394.so.11.1.0
+shared/lib/libavc1394.so.0.3.0
+shared/lib/librom1394.so.0.3.0
+shared/lib/libiec61883.so.0.1.1
+shared/lib/libjack.so.0.1.0
+shared/lib/libdrm.so.2.124.0
 shared/lib/libxcb.so.1.1.0
-shared/lib/libxcb-render.so.0.0.0
-shared/lib/libXrender.so.1.3.0
+shared/lib/libxcb-shm.so.0.0.0
+shared/lib/libxcb-shape.so.0.0.0
+shared/lib/libxcb-xfixes.so.0.0.0
+shared/lib/libasound.so.2.0.0
+shared/lib/libGL.so.1.7.0
+shared/lib/libpulse.so.0.24.3
+shared/lib/libv4l2.so.0.0.0
+shared/lib/libXv.so.1.0.0
+shared/lib/libX11.so.6.4.0
 shared/lib/libXext.so.6.4.0
-shared/lib/libhwy.so.1.0.3
-shared/lib/liblcms2.so.2.0.14
+shared/lib/libpostproc.so.58.3.100
+shared/lib/libbs2b.so.0.0.0
+shared/lib/librubberband.so.3.0.0
+shared/lib/libharfbuzz.so.0.61101.0
+shared/lib/libfribidi.so.0.4.0
+shared/lib/libplacebo.so.349
+shared/lib/libvmaf.so.3.0.0
+shared/lib/libass.so.9.3.1
+shared/lib/libvidstab.so.1.2
+shared/lib/libzmq.so.5.2.5
+shared/lib/libzimg.so.2.0.0
+shared/lib/libglslang.so.15.2.0
+shared/lib/libOpenCL.so.1.0.0
+shared/lib/libfontconfig.so.1.15.0
+shared/lib/libfreetype.so.6.20.2
+shared/lib/libdvdnav.so.4.3.0
+shared/lib/libdvdread.so.8.0.0
+shared/lib/libxml2.so.2.13.5
+shared/lib/libbz2.so.1.0.8
+shared/lib/libmodplug.so.1.0.0
+shared/lib/libopenmpt.so.0.4.4
+shared/lib/libbluray.so.2.4.3
+shared/lib/libgmp.so.10.5.0
+shared/lib/libgnutls.so.30.40.3
+shared/lib/libsrt.so.1.5.4
+shared/lib/libssh.so.4.10.1
+shared/lib/libva-drm.so.2.2200.0
+shared/lib/libva-x11.so.2.2200.0
+shared/lib/libvdpau.so.1.0.0
+shared/lib/libsoxr.so.0.1.2
+shared/lib/libEGL.so.1.1.0
+shared/lib/libxkbcommon.so.0.8.1
+shared/lib/libpng16.so.16.47.0
+shared/lib/libmd4c.so.0.5.2
+shared/lib/libdbus-1.so.3.38.3
+shared/lib/libGLdispatch.so.0.0.0
+shared/lib/libdouble-conversion.so.3.3.0
+shared/lib/libb2.so.1.0.4
+shared/lib/libpcre2-16.so.0.14.0
+shared/lib/libkrb5.so.3.3
+shared/lib/libk5crypto.so.3.1
+shared/lib/libcom_err.so.2.1
+shared/lib/libkrb5support.so.0.1
+shared/lib/libkeyutils.so.1.10
+shared/lib/libresolv.so.2
+shared/lib/libproxy/libpxbackend-1.0.so
+shared/lib/libcap.so.2.75
+shared/lib/libgio-2.0.so.0.8400.1
+shared/lib/libgdk_pixbuf-2.0.so.0.4200.12
+shared/lib/libpangocairo-1.0.so.0.5600.3
+shared/lib/libpango-1.0.so.0.5600.3
+shared/lib/libXrender.so.1.3.0
+shared/lib/libxcb-render.so.0.0.0
+shared/lib/libpixman-1.so.0.44.2
+shared/lib/libffi.so.8.1.4
+shared/lib/libpcre2-8.so.0.14.0
+shared/lib/libjxl_cms.so.0.11.1
+shared/lib/libhwy.so.1.2.0
 shared/lib/libogg.so.0.8.5
-shared/lib/libnuma.so.1.0.0
-shared/lib/libpthread.so.0
+shared/lib/libsharpyuv.so.0.1.1
+shared/lib/libdb-5.3.so
+shared/lib/libXau.so.6.0.0
+shared/lib/libXdmcp.so.6.0.0
+shared/lib/pulseaudio/libpulsecommon-17.0.so
+shared/lib/libv4lconvert.so.0.0.0
+shared/lib/libfftw3.so.3.6.10
+shared/lib/libsamplerate.so.0.2.2
+shared/lib/libgraphite2.so.3.2.1
+shared/lib/libunwind.so.8.1.0
+shared/lib/libshaderc_shared.so.1
+shared/lib/libglslang-default-resource-limits.so.15.2.0
+shared/lib/libvulkan.so.1.4.309
+shared/lib/liblcms2.so.2.0.17
+shared/lib/libdovi.so.3.3.1
+shared/lib/libunibreak.so.6.0.1
+shared/lib/libgomp.so.1.0.0
+shared/lib/libsodium.so.26.2.0
+shared/lib/libpgm-5.3.so.0.0.128
+shared/lib/libSPIRV-Tools-opt.so
+shared/lib/libSPIRV-Tools.so
+shared/lib/libexpat.so.1.10.2
+shared/lib/libmpg123.so.0.48.3
+shared/lib/libvorbisfile.so.3.3.8
+shared/lib/libleancrypto.so.1
+shared/lib/libp11-kit.so.0.4.1
+shared/lib/libidn2.so.0.4.0
+shared/lib/libunistring.so.5.2.0
+shared/lib/libtasn1.so.6.6.4
+shared/lib/libhogweed.so.6.10
+shared/lib/libnettle.so.8.10
 shared/lib/libXfixes.so.3.1.0
 shared/lib/libX11-xcb.so.1.0.0
 shared/lib/libxcb-dri3.so.0.1.0
-shared/lib/libGLdispatch.so.0.0.0
-shared/lib/libexpat.so.1.8.10
-shared/lib/libgraphite2.so.3.2.1
-shared/lib/libicudata.so.72.1
-shared/lib/libgomp.so.1.0.0
-shared/lib/libcap.so.2.66
-shared/lib/libgcrypt.so.20.4.1
-shared/lib/liblz4.so.1.9.4
-shared/lib/libgmodule-2.0.so.0.7400.6
-shared/lib/libjpeg.so.62.3.0
+shared/lib/libsystemd.so.0.40.0
+shared/lib/libcurl.so.4.8.0
+shared/lib/libduktape.so.207.20700
+shared/lib/libgmodule-2.0.so.0.8400.1
 shared/lib/libmount.so.1.1.0
-shared/lib/libselinux.so.1
-shared/lib/libpangoft2-1.0.so.0.5000.12
-shared/lib/libfribidi.so.0.4.0
+shared/lib/libjpeg.so.8.3.2
+shared/lib/libtiff.so.6.1.0
+shared/lib/libpangoft2-1.0.so.0.5600.3
 shared/lib/libthai.so.0.3.1
-shared/lib/libXau.so.6.0.0
-shared/lib/libXdmcp.so.6.0.0
-shared/lib/libgpg-error.so.0.33.1
+shared/lib/libsndfile.so.1.0.37
+shared/lib/libasyncns.so.0.3.1
+shared/lib/libnghttp3.so.9.2.6
+shared/lib/libnghttp2.so.14.28.4
+shared/lib/libssh2.so.1.0.1
+shared/lib/libpsl.so.5.3.5
 shared/lib/libblkid.so.1.1.0
+shared/lib/libjbig.so.2.1
 shared/lib/libdatrie.so.1.4.0
-shared/lib/libbsd.so.0.11.7
-shared/lib/libmd.so.0.0.5
-shared/lib/libvulkan.so.1.3.239
+shared/lib/libFLAC.so.14.0.0
+shared/lib/libSDL3.so.0.2.10
 share/vulkan/icd.d/intel_hasvk_icd.x86_64.json
 shared/lib/libvulkan_intel_hasvk.so
-shared/lib/libwayland-client.so.0.21.0
 shared/lib/libxcb-present.so.0.0.0
-shared/lib/libxcb-xfixes.so.0.0.0
 shared/lib/libxcb-sync.so.1.0.0
 shared/lib/libxcb-randr.so.0.1.0
 shared/lib/libxshmfence.so.1.0.0
+shared/lib/libxcb-keysyms.so.1.0.0
+shared/lib/libwayland-client.so.0.23.1
 share/vulkan/icd.d/intel_icd.x86_64.json
 shared/lib/libvulkan_intel.so
-share/vulkan/icd.d/lvp_icd.x86_64.json
-shared/lib/libvulkan_lvp.so
-shared/lib/libLLVM-15.so.1
-shared/lib/libedit.so.2.0.70
-shared/lib/libz3.so.4
-shared/lib/libtinfo.so.6.4
+share/vulkan/icd.d/nouveau_icd.x86_64.json
+shared/lib/libvulkan_nouveau.so
 share/vulkan/icd.d/radeon_icd.x86_64.json
 shared/lib/libvulkan_radeon.so
-shared/lib/libdrm_amdgpu.so.1.0.0
-shared/lib/libelf-0.188.so
-shared/lib/libVkLayer_MESA_device_select.so
+shared/lib/libLLVM.so.19.1
+shared/lib/libelf-0.192.so
+shared/lib/libdrm_amdgpu.so.1.124.0
+shared/lib/libedit.so.0.0.75
+shared/lib/libncursesw.so.6.5
 bin/qt.conf
 shared/lib/qt6/plugins/platforms/libqeglfs.so
 shared/lib/qt6/plugins/platforms/libqlinuxfb.so
@@ -156,57 +225,29 @@ shared/lib/qt6/plugins/platforms/libqvnc.so
 shared/lib/qt6/plugins/platforms/libqwayland-egl.so
 shared/lib/qt6/plugins/platforms/libqwayland-generic.so
 shared/lib/qt6/plugins/platforms/libqxcb.so
-shared/lib/libQt6WaylandClient.so.6.4.2
-shared/lib/libwayland-cursor.so.0.21.0
+shared/lib/libQt6XcbQpa.so.6.9.0
+shared/lib/libxcb-cursor.so.0.0.0
+shared/lib/libxcb-icccm.so.4.0.0
+shared/lib/libxcb-image.so.0.0.0
+shared/lib/libxcb-render-util.so.0.0.0
+shared/lib/libxcb-xkb.so.1.0.0
+shared/lib/libSM.so.6.0.1
+shared/lib/libICE.so.6.3.0
+shared/lib/libxcb-xinput.so.0.1.0
+shared/lib/libxkbcommon-x11.so.0.8.1
+shared/lib/libxcb-util.so.1.0.0
+shared/lib/libuuid.so.1.3.0
 shared/lib/qt6/plugins/platformthemes/libqgtk3.so
-shared/lib/libgtk-3.so.0.2406.32
-shared/lib/libgdk-3.so.0.2406.32
-shared/lib/libatk-1.0.so.0.24609.1
-shared/lib/libepoxy.so.0.0.0
+shared/lib/qt6/plugins/platformthemes/libqt6ct.so
+shared/lib/qt6/plugins/platformthemes/libqxdgdesktopportal.so
+shared/lib/libqt6ct-common.so.0.10
+etc/fonts/fonts.conf
 shared/lib/libXi.so.6.1.0
-shared/lib/libatk-bridge-2.0.so.0.0.0
-shared/lib/libwayland-egl.so.1.21.0
+shared/lib/libwayland-cursor.so.0.23.1
+shared/lib/libwayland-egl.so.1.23.1
 shared/lib/libXcursor.so.1.0.2
-shared/lib/libXdamage.so.1.1.0
-shared/lib/libXcomposite.so.1.0.0
 shared/lib/libXrandr.so.2.2.0
-shared/lib/libXinerama.so.1.0.0
-shared/lib/libdl.so.2
-shared/lib/libatspi.so.0.0.1
-share/glib-2.0/schemas/gschemas.compiled
-shared/lib/gio/modules/giomodule.cache
-shared/lib/gio/modules/libdconfsettings.so
-shared/lib/gio/modules/libgvfsdbus.so
-shared/lib/gvfs/libgvfscommon.so
-share/X11/xkb/rules/evdev
-share/X11/xkb/keycodes/evdev
-share/X11/xkb/keycodes/aliases
-share/X11/xkb/types/complete
-share/X11/xkb/types/basic
-share/X11/xkb/types/mousekeys
-share/X11/xkb/types/pc
-share/X11/xkb/types/iso9995
-share/X11/xkb/types/level5
-share/X11/xkb/types/extra
-share/X11/xkb/types/numpad
-share/X11/xkb/compat/complete
-share/X11/xkb/compat/basic
-share/X11/xkb/compat/ledcaps
-share/X11/xkb/compat/lednum
-share/X11/xkb/compat/iso9995
-share/X11/xkb/compat/mousekeys
-share/X11/xkb/compat/accessx
-share/X11/xkb/compat/misc
-share/X11/xkb/compat/ledscroll
-share/X11/xkb/compat/xfree86
-share/X11/xkb/compat/level5
-share/X11/xkb/compat/caps
-share/X11/xkb/symbols/pc
-share/X11/xkb/symbols/srvr_ctrl
-share/X11/xkb/symbols/keypad
-share/X11/xkb/symbols/altwin
-share/X11/xkb/symbols/us
-share/X11/xkb/symbols/inet
+shared/lib/qt6/plugins/styles/libqt6ct-style.so
 shared/lib/qt6/plugins/platforminputcontexts/libcomposeplatforminputcontextplugin.so
 shared/lib/qt6/plugins/platforminputcontexts/libibusplatforminputcontextplugin.so
 shared/lib/qt6/plugins/iconengines/libqsvgicon.so
@@ -214,37 +255,5 @@ shared/lib/qt6/plugins/imageformats/libqgif.so
 shared/lib/qt6/plugins/imageformats/libqico.so
 shared/lib/qt6/plugins/imageformats/libqjpeg.so
 shared/lib/qt6/plugins/imageformats/libqsvg.so
-shared/lib/libQt6Svg.so.6.4.2
-etc/fonts/fonts.conf
-shared/lib/qt6/plugins/wayland-shell-integration/libfullscreen-shell-v1.so
-shared/lib/qt6/plugins/wayland-shell-integration/libivi-shell.so
-shared/lib/qt6/plugins/wayland-shell-integration/libqt-shell.so
-shared/lib/qt6/plugins/wayland-shell-integration/libwl-shell-plugin.so
-shared/lib/qt6/plugins/wayland-shell-integration/libxdg-shell.so
-shared/lib/qt6/plugins/wayland-graphics-integration-client/libdmabuf-server.so
-shared/lib/qt6/plugins/wayland-graphics-integration-client/libdrm-egl-server.so
-shared/lib/qt6/plugins/wayland-graphics-integration-client/libqt-plugin-wayland-egl.so
-shared/lib/qt6/plugins/wayland-graphics-integration-client/libshm-emulation-server.so
-shared/lib/qt6/plugins/wayland-graphics-integration-client/libvulkan-server.so
-shared/lib/libQt6WaylandEglClientHwIntegration.so.6.4.2
-shared/lib/libQt6OpenGL.so.6.4.2
-share/glvnd/egl_vendor.d/50_mesa.json
-shared/lib/libEGL_mesa.so.0.0.0
-shared/lib/libgbm.so.1.0.0
-shared/lib/libglapi.so.0.0.0
-shared/lib/libxcb-dri2.so.0.0.0
-shared/lib/libwayland-server.so.0.21.0
-shared/lib/dri/swrast_dri.so
-shared/lib/libsensors.so.5.0.0
-shared/lib/libdrm_radeon.so.1.0.1
-shared/lib/libdrm_nouveau.so.2.0.0
-shared/lib/libdrm_intel.so.1.0.0
-shared/lib/libpciaccess.so.0.11.1
-shared/lib/qt6/plugins/wayland-decoration-client/libbradient.so
-shared/lib/gtk-3.0/modules/libcanberra-gtk3-module.so
-shared/lib/libcanberra-gtk3.so.0.1.9
-shared/lib/libcanberra.so.0.2.5
-shared/lib/libvorbisfile.so.3.3.8
-shared/lib/libtdb.so.1.4.8
-shared/lib/libltdl.so.7.3.2
+shared/lib/libQt6Svg.so.6.9.0
 shared/lib/libXss.so.1.0.0
@@ -1,93 +1,67 @@
-#!/bin/sh -e
+#!/bin/sh

 # SPDX-FileCopyrightText: 2025 eden Emulator Project
 # SPDX-License-Identifier: GPL-3.0-or-later

 # This script assumes you're in the source directory
+set -ex

 export APPIMAGE_EXTRACT_AND_RUN=1
 export BASE_ARCH="$(uname -m)"
+export ARCH="$BASE_ARCH"

-SHARUN="https://github.com/VHSgunzo/sharun/releases/latest/download/sharun-${BASE_ARCH}-aio"
-URUNTIME="https://github.com/VHSgunzo/uruntime/releases/latest/download/uruntime-appimage-dwarfs-${BASE_ARCH}"
+LIB4BN="https://raw.githubusercontent.com/VHSgunzo/sharun/refs/heads/main/lib4bin"
+URUNTIME="https://github.com/VHSgunzo/uruntime/releases/latest/download/uruntime-appimage-dwarfs-$ARCH"

-case "$1" in
-    amd64|"")
-        echo "Packaging amd64-v3 optimized build of Eden"
-        ARCH="amd64_v3"
-        ;;
-    steamdeck)
-        echo "Packaging Steam Deck (Zen 2) optimized build of Eden"
-        ARCH="steamdeck"
-        ;;
-    rog-ally|allyx)
-        echo "Packaging ROG Ally X (Zen 4) optimized build of Eden"
-        ARCH="rog-ally-x"
-        ;;
-    legacy)
-        echo "Packaging amd64 generic build of Eden"
-        ARCH=amd64
-        ;;
-    aarch64)
-        echo "Packaging armv8-a build of Eden"
-        ARCH=aarch64
-        ;;
-    armv9)
-        echo "Packaging armv9-a build of Eden"
-        ARCH=armv9
-        ;;
-esac
-
-export BUILDDIR="$2"
-
-if [ "$BUILDDIR" = '' ]
-then
-	BUILDDIR=build
+if [ "$ARCH" = 'x86_64' ]; then
+	if [ "$1" = 'v3' ]; then
+		ARCH="${ARCH}_v3"
+	fi
 fi

 EDEN_TAG=$(git describe --tags --abbrev=0)
-echo "Making \"$EDEN_TAG\" build"
-# git checkout "$EDEN_TAG"
+echo "Making stable \"$EDEN_TAG\" build"
+git checkout "$EDEN_TAG"
 VERSION="$(echo "$EDEN_TAG")"

 # NOW MAKE APPIMAGE
 mkdir -p ./AppDir
 cd ./AppDir

-cp ../dist/org.eden_emu.eden.desktop .
-cp ../dist/org.eden_emu.eden.svg .
+cat > eden.desktop << EOL
+[Desktop Entry]
+Type=Application
+Name=Eden
+Icon=eden
+StartupWMClass=eden
+Exec=eden
+Categories=Game;Emulator;
+EOL

-ln -sf ./org.eden_emu.eden.svg ./.DirIcon
+cp ../dist/eden.svg ./eden.svg

-UPINFO='gh-releases-zsync|eden-emulator|Releases|latest|*.AppImage.zsync'
+ln -sf ./eden.svg ./.DirIcon

 if [ "$DEVEL" = 'true' ]; then
-	sed -i 's|Name=Eden|Name=Eden Nightly|' ./org.eden_emu.eden.desktop
- 	UPINFO="$(echo "$UPINFO" | sed 's|Releases|nightly|')"
+	sed -i 's|Name=Eden|Name=Eden Nightly|' ./eden.desktop
+	UPINFO="$(echo "$UPINFO" | sed 's|latest|nightly|')"
 fi

 LIBDIR="/usr/lib"
+# some distros are weird and use a subdir

-# Workaround for Gentoo
-if [ ! -d "$LIBDIR/qt6" ]
-then
-	LIBDIR="/usr/lib64"
-fi
-
-# Workaround for Debian
-if [ ! -d "$LIBDIR/qt6" ]
+if [ ! -f "/usr/lib/libGL.so" ]
 then
    LIBDIR="/usr/lib/${BASE_ARCH}-linux-gnu"
 fi

 # Bundle all libs
-
-wget --retry-connrefused --tries=30 "$SHARUN" -O ./sharun-aio
-chmod +x ./sharun-aio
-xvfb-run -a ./sharun-aio l -p -v -e -s -k \
-	../$BUILDDIR/bin/eden* \
+wget --retry-connrefused --tries=30 "$LIB4BN" -O ./lib4bin
+chmod +x ./lib4bin
+xvfb-run -a -- ./lib4bin -p -v -e -s -k \
+	../build/bin/eden* \
 	$LIBDIR/lib*GL*.so* \
-  $LIBDIR/libSDL2*.so* \
+    $LIBDIR/libSDL2*.so* \
 	$LIBDIR/dri/* \
 	$LIBDIR/vdpau/* \
 	$LIBDIR/libvulkan* \
@@ -109,18 +83,14 @@ xvfb-run -a ./sharun-aio l -p -v -e -s -k \
 	$LIBDIR/spa-0.2/*/* \
 	$LIBDIR/alsa-lib/*

-rm -f ./sharun-aio
-
 # Prepare sharun
 if [ "$ARCH" = 'aarch64' ]; then
-	# allow the host vulkan to be used for aarch64 given the sad situation
+	# allow the host vulkan to be used for aarch64 given the sed situation
 	echo 'SHARUN_ALLOW_SYS_VKICD=1' > ./.env
 fi

-# Workaround for Gentoo
-if [ -d "shared/libproxy" ]; then
-	cp shared/libproxy/* lib/
-fi
+wget https://github.com/VHSgunzo/sharun/releases/download/v0.6.3/sharun-x86_64 -O sharun
+chmod a+x sharun

 ln -f ./sharun ./AppRun
 ./sharun -g
@@ -146,4 +116,9 @@ echo "Generating AppImage..."

 echo "Generating zsync file..."
 zsyncmake *.AppImage -u *.AppImage
-echo "All Done!"
+echo "All Done!"
+
+# Cleanup
+
+rm -rf AppDir
+rm uruntime
@@ -1,11 +0,0 @@
-#!/bin/sh
-
-for i in dist/languages/*.ts; do
-    SRC=en_US
-    TARGET=`head -n1 $i | awk -F 'language="' '{split($2, a, "\""); print a[1]}'`
-
-    # requires fd
-    SOURCES=`fd . src/yuzu -tf -e ui -e cpp -e h -e plist`
-
-    lupdate -source-language $SRC -target-language $TARGET $SOURCES -ts /data/code/eden/$i
-done
@@ -0,0 +1,27 @@
+echo off
+
+set chain=%1
+
+if not defined DevEnvDir (
+	"C:\Program Files\Microsoft Visual Studio\2022\Community\VC\Auxiliary\Build\vcvarsall.bat" %chain%
+)
+
+mkdir build
+
+cmake -S . -B build\%chain% ^
+-DCMAKE_BUILD_TYPE=Release ^
+-DYUZU_USE_BUNDLED_QT=ON ^
+-DENABLE_QT_TRANSLATION=ON ^
+-DUSE_DISCORD_PRESENCE=ON ^
+-DYUZU_USE_BUNDLED_VCPKG=ON ^
+-DYUZU_USE_BUNDLED_SDL2=ON ^
+-G "Ninja" ^
+-DYUZU_TESTS=OFF ^
+-DCMAKE_C_COMPILER_LAUNCHER=ccache ^
+-DCMAKE_CXX_COMPILER_LAUNCHER=ccache ^
+-DCMAKE_TOOLCHAIN_FILE="%CD%\CMakeModules\MSVCCache.cmake" ^
+-DUSE_CCACHE=ON
+
+cmake --build build\%chain%
+
+ccache -s -v
@@ -0,0 +1,31 @@
+echo off
+
+set chain=%1
+set qt_ver=%2
+
+if not defined DevEnvDir (
+	CALL "C:\Program Files\Microsoft Visual Studio\2022\Community\VC\Auxiliary\Build\vcvarsall.bat" %chain%
+)
+
+CALL mkdir build
+
+CALL cmake -S . -B build\%chain% ^
+-DCMAKE_BUILD_TYPE=Release ^
+-DYUZU_USE_BUNDLED_QT=ON ^
+-DENABLE_QT_TRANSLATION=ON ^
+-DUSE_DISCORD_PRESENCE=ON ^
+-DYUZU_USE_BUNDLED_VCPKG=ON ^
+-DYUZU_USE_BUNDLED_SDL2=ON ^
+-G "Ninja" ^
+-DYUZU_TESTS=OFF ^
+-DUSE_BUNDLED_QT=OFF ^
+-DUSE_SYSTEM_QT=ON ^
+-DCMAKE_PREFIX_PATH=C:\Qt\%qt_ver%\msvc2022_64 ^
+-DCMAKE_C_COMPILER_LAUNCHER=ccache ^
+-DCMAKE_CXX_COMPILER_LAUNCHER=ccache ^
+-DCMAKE_TOOLCHAIN_FILE="%CD%\CMakeModules\MSVCCache.cmake" ^
+-DUSE_CCACHE=ON
+
+CALL cmake --build build\%chain%
+
+CALL ccache -s -v
@@ -1,49 +0,0 @@
-#!/bin/bash -e
-
-# SPDX-FileCopyrightText: 2025 eden Emulator Project
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-if [ "$DEVEL" != "true" ]; then
-    export EXTRA_CMAKE_FLAGS=("${EXTRA_CMAKE_FLAGS[@]}" -DENABLE_QT_UPDATE_CHECKER=ON)
-fi
-
-if [ "$CCACHE" = "true" ]; then
-    export EXTRA_CMAKE_FLAGS=("${EXTRA_CMAKE_FLAGS[@]}" -DUSE_CCACHE=ON)
-fi
-
-if [ "$BUNDLE_QT" = "true" ]; then
-    export EXTRA_CMAKE_FLAGS=("${EXTRA_CMAKE_FLAGS[@]}" -DYUZU_USE_BUNDLED_QT=ON)
-else
-    export EXTRA_CMAKE_FLAGS=("${EXTRA_CMAKE_FLAGS[@]}" -DYUZU_USE_BUNDLED_QT=OFF)
-fi
-
-if [ "$WINDEPLOYQT" == "" ]; then
-    echo "You must supply the WINDEPLOYQT environment variable."
-    exit 1
-fi
-
-export EXTRA_CMAKE_FLAGS=("${EXTRA_CMAKE_FLAGS[@]}" $@)
-
-mkdir -p build && cd build
-cmake .. -G Ninja \
-    -DCMAKE_BUILD_TYPE=Release \
-	-DENABLE_QT_TRANSLATION=ON \
-    -DUSE_DISCORD_PRESENCE=ON \
-    -DYUZU_USE_BUNDLED_SDL2=OFF \
-    -DYUZU_USE_EXTERNAL_SDL2=ON \
-    -DYUZU_TESTS=OFF \
-    -DYUZU_CMD=OFF \
-    -DYUZU_ROOM_STANDALONE=OFF \
-    -DYUZU_USE_QT_MULTIMEDIA=ON \
-    -DYUZU_USE_QT_WEB_ENGINE=ON \
-    -DYUZU_ENABLE_LTO=ON \
-	  "${EXTRA_CMAKE_FLAGS[@]}"
-
-ninja
-
-set +e
-rm -f bin/*.pdb
-set -e
-
-$WINDEPLOYQT --release --no-compiler-runtime --no-opengl-sw --no-system-dxc-compiler --no-system-d3d-compiler --dir pkg bin/eden.exe
-cp bin/* pkg
@@ -0,0 +1,42 @@
+# SPDX-FileCopyrightText: 2025 eden Emulator Project
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+$target=$args[0]
+$debug=$args[1]
+
+$GITDATE = $(git show -s --date=short --format='%ad') -replace "-", ""
+$GITREV = $(git show -s --format='%h')
+$RELEASE_DIST = "eden-windows-msvc"
+$ARTIFACTS_DIR = "artifacts"
+
+New-Item -ItemType Directory -Path $ARTIFACTS_DIR -Force
+New-Item -ItemType Directory -Path $RELEASE_DIST -Force
+
+if ($debug -eq "yes") {
+	mkdir -p pdb
+	$BUILD_PDB = "eden-windows-msvc-$GITDATE-$GITREV-debugsymbols.zip"
+	Get-ChildItem "build/$target/bin/" -Recurse -Filter "*.pdb" | Copy-Item -destination .\pdb -ErrorAction SilentlyContinue
+
+	if (Test-Path -Path ".\pdb\*.pdb") {
+		7z a -tzip $BUILD_PDB .\pdb\*.pdb
+		Move-Item $BUILD_PDB $ARTIFACTS_DIR/ -ErrorAction SilentlyContinue
+	}
+} else {
+    Remove-Item -Force "$RELEASE_DIST\*.pdb"
+}
+
+
+Copy-Item "build/$target/bin/Release/*" -Destination "$RELEASE_DIST" -Recurse -ErrorAction SilentlyContinue
+if (-not $?) {
+	# Try without Release subfolder if that doesn't exist
+	Copy-Item "build/$target/bin/*" -Destination "$RELEASE_DIST" -Recurse -ErrorAction SilentlyContinue
+}
+
+
+$BUILD_ZIP = "eden-windows-msvc-$GITDATE-$GITREV.zip"
+
+7z a -tzip $BUILD_ZIP $RELEASE_DIST\*
+
+Move-Item $BUILD_ZIP $ARTIFACTS_DIR/ -Force #-ErrorAction SilentlyContinue
+Copy-Item "LICENSE*" -Destination "$RELEASE_DIST" -ErrorAction SilentlyContinue
+Copy-Item "README*" -Destination "$RELEASE_DIST" -ErrorAction SilentlyContinue
@@ -1,13 +0,0 @@
-GITDATE=$(git show -s --date=short --format='%ad' | tr -d "-")
-GITREV=$(git show -s --format='%h')
-
-ZIP_NAME="Eden-Windows-${ARCH}-${GITDATE}-${GITREV}.zip"
-
-mkdir -p artifacts
-mkdir -p pack
-
-cp -r build/pkg/* pack
-
-cp LICENSE* README* pack/
-
-7z a -tzip artifacts/$ZIP_NAME pack/*
@@ -1,7 +0,0 @@
-# This is specific to the CI runner and is unlikely to work on your machine.
-QTDIR="/c/Qt/6.9.0/msvc2022_64"
-
-export QT_ROOT_DIR="$QTDIR"
-export QT_PLUGIN_PATH="$QTDIR/plugins"
-export QML2_IMPORT_PATH="$QTDIR/qml"
-export PATH="${PATH};$QTDIR/bin"
@@ -5,24 +5,23 @@ name: eden-build
 on:
  push:
    branches: [ "master" ]
+  pull_request:
+    branches: [ master ]

 # TODO: combine build.yml into trigger_release.yml
 jobs:
  source:
    if: ${{ !github.head_ref }}
-    runs-on: source
+    runs-on: linux
    steps:
      - uses: actions/checkout@v4
        with:
          submodules: recursive
-
      - name: Pack
        run: ./.ci/source.sh
-
      - name: Upload
        uses: forgejo/upload-artifact@v4
        with:
-          retention-days: 2
          name: source.zip
          path: artifacts/

@@ -67,21 +66,17 @@ jobs:
        run: ./.ci/windows/cygwin.bat

      - name: Configure & Build
-        shell: bash
-        run: |
-          ./.ci/windows/qt-envvars.sh
-          DEVEL=true WINDEPLOYQT="/c/Qt/6.9.0/msvc2022_64/bin/windeployqt6.exe" .ci/windows/build.sh -DCMAKE_PREFIX_PATH=C:/Qt/6.9.0/msvc2022_64/lib/cmake/Qt6
+        id: cmake
+        shell: cmd
+        run: ./.ci/windows/build-bqt.bat amd64 yes

      - name: Package artifacts
-        shell: bash
-        run: |
-          ./.ci/windows/qt-envvars.sh
-          ./.ci/windows/package.sh
+        shell: powershell
+        run: ./.ci/windows/package.ps1 amd64 yes

      - name: Upload Windows artifacts
        uses: forgejo/upload-artifact@v4
        with:
-          retention-days: 2
          name: ${{ matrix.target }}.zip
          path: artifacts/*

@@ -101,15 +96,14 @@ jobs:
          fetch-tags: true

      - name: Build
-        run: TARGET=appimage DEVEL=true ./.ci/linux/build.sh
+        run: ./.ci/linux/build.sh v3 8

      - name: Package AppImage
-        run: DEVEL=true ./.ci/linux/package.sh &> /dev/null
+        run: ./.ci/linux/package.sh v3 &> /dev/null

      - name: Upload Linux artifacts
        uses: forgejo/upload-artifact@v4
        with:
-          retention-days: 3
          name: linux.zip
          path: ./*.AppImage

@@ -117,6 +111,9 @@ jobs:
    runs-on: android

    env:
+      CCACHE_DIR: /home/runner/.cache/ccache
+      CCACHE_COMPILERCHECK: content
+      CCACHE_SLOPPINESS: time_macros
      OS: android
      TARGET: universal

@@ -135,11 +132,7 @@ jobs:
          echo $GIT_TAG_NAME

      - name: Build
-        run: ANDROID_HOME=/home/runner/sdk ./.ci/android/build.sh
-        env:
-          ANDROID_KEYSTORE_B64: ${{ secrets.ANDROID_KEYSTORE_B64 }}
-          ANDROID_KEY_ALIAS: ${{ secrets.ANDROID_KEY_ALIAS }}
-          ANDROID_KEYSTORE_PASS: ${{ secrets.ANDROID_KEYSTORE_PASS }}
+        run: ANDROID_HOME=/opt/android-sdk ./.ci/android/build.sh

      - name: Package Android artifacts
        run: ./.ci/android/package.sh
@@ -147,6 +140,5 @@ jobs:
      - name: Upload Android artifacts
        uses: forgejo/upload-artifact@v4
        with:
-          retention-days: 2
          name: android.zip
          path: artifacts/*
@@ -1,22 +1,22 @@
 name: eden-license

 on:
-  pull_request:
+  pull_request_target:
    branches: [ master ]

 jobs:
  license-header:
-    runs-on: source
+    runs-on: linux
    steps:
      - uses: actions/checkout@v4
        with:
          fetch-depth: 0

-      - name: Fetch
+      - name: Fetch master branch
        run: git fetch origin master:master

      - name: Make script executable
-        run: chmod +x ./.ci/license-header.sh
+        run: chmod +x ./.ci/license-header.rb

      - name: Check license headers
-        run: ./.ci/license-header.sh
+        run: ./.ci/license-header.rb
@@ -9,7 +9,7 @@ permissions:

 jobs:
  source:
-    runs-on: source
+    runs-on: linux
    steps:
      - uses: actions/checkout@v4
        with:
@@ -19,7 +19,6 @@ jobs:
      - name: Upload
        uses: forgejo/upload-artifact@v4
        with:
-          retention-days: 2
          name: source.zip
          path: artifacts/

@@ -64,19 +63,17 @@ jobs:
        run: ./.ci/windows/cygwin.bat

      - name: Configure & Build
-        shell: bash
-        run: DEVEL=false ./.ci/windows/build.sh
+        id: cmake
+        shell: cmd
+        run: ./.ci/windows/build-bqt.bat amd64 no

      - name: Package artifacts
-        shell: bash
-        run: |
-          export PATH="${PATH}:/c/Qt/6.9.0/msvc2022_64/bin"
-          ./.ci/windows/package.sh
+        shell: powershell
+        run: ./.ci/windows/package.ps1 amd64 no

      - name: Upload Windows artifacts
        uses: forgejo/upload-artifact@v4
        with:
-          retention-days: 2
          name: ${{ matrix.target }}.zip
          path: artifacts/*

@@ -96,7 +93,7 @@ jobs:
          fetch-tags: true

      - name: Build
-        run: TARGET=appimage RELEASE=1 ./.ci/linux/build.sh v3 8
+        run: ./.ci/linux/build.sh v3 8

      - name: Package AppImage
        run: ./.ci/linux/package.sh v3 &> /dev/null
@@ -104,7 +101,6 @@ jobs:
      - name: Upload Linux artifacts
        uses: forgejo/upload-artifact@v4
        with:
-          retention-days: 2
          name: linux.zip
          path: ./*.AppImage*

@@ -133,11 +129,7 @@ jobs:
          echo $GIT_TAG_NAME

      - name: Build
-        run: ANDROID_HOME=/home/runner/sdk ./.ci/android/build.sh
-        env:
-          ANDROID_KEYSTORE_B64: ${{ secrets.ANDROID_KEYSTORE_B64 }}
-          ANDROID_KEY_ALIAS: ${{ secrets.ANDROID_KEY_ALIAS }}
-          ANDROID_KEYSTORE_PASS: ${{ secrets.ANDROID_KEYSTORE_PASS }}
+        run: ANDROID_HOME=/opt/android-sdk ./.ci/android/build.sh

      - name: Package Android artifacts
        run: ./.ci/android/package.sh
@@ -145,7 +137,6 @@ jobs:
      - name: Upload Android artifacts
        uses: forgejo/upload-artifact@v4
        with:
-          retention-days: 2
          name: android.zip
          path: artifacts/*

@@ -1,14 +1,9 @@
 # SPDX-FileCopyrightText: 2013 Citra Emulator Project
 # SPDX-License-Identifier: GPL-2.0-or-later

-# SPDX-FileCopyrightText: Eden Emulator Project
-# SPDX-License-Identifier: GPL-3.0-or-later
-
 # Build directory
 [Bb]uild*/
 doc-build/
-AppDir/
-uruntime

 # Generated source files
 src/common/scm_rev.cpp
@@ -41,8 +36,3 @@ CMakeSettings.json
 # Windows global filetypes
 Thumbs.db

-# Artifacts
-eden-windows-msvc
-artifacts
-*.AppImage*
-*.patch
@@ -1,69 +1,75 @@
 # SPDX-FileCopyrightText: 2014 Citra Emulator Project
 # SPDX-License-Identifier: GPL-2.0-or-later

+[submodule "enet"]
+	path = externals/enet
+	url = https://git.eden-emu.dev/eden-emu/enet.git
 [submodule "cubeb"]
 	path = externals/cubeb
-	url = https://github.com/mozilla/cubeb.git
+	url = https://git.eden-emu.dev/eden-emu/cubeb.git
+[submodule "dynarmic"]
+	path = externals/dynarmic
+	url = https://git.eden-emu.dev/eden-emu/dynarmic.git
 [submodule "libusb"]
 	path = externals/libusb/libusb
-	url = https://github.com/libusb/libusb.git
+	url = https://git.eden-emu.dev/eden-emu/libusb.git
+[submodule "discord-rpc"]
+	path = externals/discord-rpc
+	url = https://git.eden-emu.dev/eden-emu/discord-rpc.git
 [submodule "Vulkan-Headers"]
 	path = externals/Vulkan-Headers
-	url = https://github.com/KhronosGroup/Vulkan-Headers.git
+	url = https://git.eden-emu.dev/eden-emu/Vulkan-Headers.git
+[submodule "sirit"]
+	path = externals/sirit
+	url = https://git.eden-emu.dev/eden-emu/sirit.git
+[submodule "mbedtls"]
+	path = externals/mbedtls
+	url = https://git.eden-emu.dev/eden-emu/mbedtls.git
 [submodule "xbyak"]
 	path = externals/xbyak
-	url = https://github.com/herumi/xbyak.git
+	url = https://git.eden-emu.dev/eden-emu/xbyak.git
 [submodule "opus"]
 	path = externals/opus
-	url = https://github.com/xiph/opus.git
+	url = https://git.eden-emu.dev/eden-emu/opus.git
 [submodule "SDL"]
 	path = externals/SDL
-	url = https://github.com/libsdl-org/SDL.git
+	url = https://git.eden-emu.dev/eden-emu/SDL.git
 [submodule "cpp-httplib"]
 	path = externals/cpp-httplib
-	url = https://github.com/yhirose/cpp-httplib.git
+	url = https://git.eden-emu.dev/eden-emu/cpp-httplib.git
 [submodule "ffmpeg"]
 	path = externals/ffmpeg/ffmpeg
-	url = https://github.com/FFmpeg/FFmpeg.git
+	url = https://git.eden-emu.dev/eden-emu/FFmpeg.git
 [submodule "vcpkg"]
 	path = externals/vcpkg
-	url = https://github.com/microsoft/vcpkg.git
+	url = https://git.eden-emu.dev/eden-emu/vcpkg.git
 [submodule "cpp-jwt"]
 	path = externals/cpp-jwt
-	url = https://github.com/arun11299/cpp-jwt.git
+	url = https://git.eden-emu.dev/eden-emu/cpp-jwt.git
+[submodule "libadrenotools"]
+	path = externals/libadrenotools
+	url = https://git.eden-emu.dev/eden-emu/libadrenotools.git
+[submodule "tzdb_to_nx"]
+	path = externals/nx_tzdb/tzdb_to_nx
+	url = https://git.eden-emu.dev/eden-emu/tzdb_to_nx.git
 [submodule "VulkanMemoryAllocator"]
 	path = externals/VulkanMemoryAllocator
-	url = https://github.com/GPUOpen-LibrariesAndSDKs/VulkanMemoryAllocator.git
+	url = https://git.eden-emu.dev/eden-emu/VulkanMemoryAllocator.git
+[submodule "breakpad"]
+	path = externals/breakpad
+	url = https://git.eden-emu.dev/eden-emu/breakpad.git
+[submodule "simpleini"]
+	path = externals/simpleini
+	url = https://git.eden-emu.dev/eden-emu/simpleini.git
+[submodule "oaknut"]
+	path = externals/oaknut
+	url = https://git.eden-emu.dev/eden-emu/oaknut.git
 [submodule "Vulkan-Utility-Libraries"]
 	path = externals/Vulkan-Utility-Libraries
-	url = https://github.com/KhronosGroup/Vulkan-Utility-Libraries.git
+	url = https://git.eden-emu.dev/eden-emu/Vulkan-Utility-Libraries.git
+[submodule "oboe"]
+	path = externals/oboe
+	url = https://git.eden-emu.dev/eden-emu/oboe.git
 [submodule "externals/boost-headers"]
 	path = externals/boost-headers
-	url = https://github.com/boostorg/headers.git
-[submodule "externals/dynarmic/externals/catch"]
-	path = externals/dynarmic/externals/catch
-	url = https://github.com/catchorg/Catch2.git
-[submodule "externals/dynarmic/externals/fmt"]
-	path = externals/dynarmic/externals/fmt
-	url = https://github.com/fmtlib/fmt.git
-[submodule "externals/dynarmic/externals/unordered_dense"]
-	path = externals/dynarmic/externals/unordered_dense
-	url = https://github.com/Lizzie841/unordered_dense.git
-[submodule "externals/dynarmic/externals/xbyak"]
-	path = externals/dynarmic/externals/xbyak
-	url = https://github.com/herumi/xbyak.git
-[submodule "externals/dynarmic/externals/zycore-c"]
-	path = externals/dynarmic/externals/zycore-c
-	url = https://github.com/zyantific/zycore-c.git
-[submodule "externals/dynarmic/externals/zydis"]
-	path = externals/dynarmic/externals/zydis
-	url = https://github.com/zyantific/zydis.git
-[submodule "externals/nx_tzdb/tzdb_to_nx/externals/tz/tz"]
-	path = externals/nx_tzdb/tzdb_to_nx/externals/tz/tz
-	url = https://github.com/eggert/tz.git
-[submodule "externals/sirit/externals/SPIRV-Headers"]
-	path = externals/sirit/externals/SPIRV-Headers
-	url = https://github.com/KhronosGroup/SPIRV-Headers.git
-[submodule "externals/SPIRV-Tools"]
-	path = externals/SPIRV-Tools
-	url = https://github.com/KhronosGroup/SPIRV-Tools.git
+	url = https://git.eden-emu.dev/eden-emu/headers.git
@@ -1,4 +1,4 @@
-# SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
+# SPDX-FileCopyrightText: Copyright yuzu/Citra Emulator Project / Eden Emulator Project
 # SPDX-License-Identifier: GPL-3.0-or-later

 cmake_minimum_required(VERSION 3.22)
@@ -34,23 +34,19 @@ cmake_dependent_option(ENABLE_LIBUSB "Enable the use of LibUSB" ON "NOT ANDROID"

 option(ENABLE_OPENGL "Enable OpenGL" ON)
 mark_as_advanced(FORCE ENABLE_OPENGL)
-
 option(ENABLE_QT "Enable the Qt frontend" ON)
-option(ENABLE_QT_TRANSLATION "Enable translations for the Qt frontend" OFF)
-option(ENABLE_QT_UPDATE_CHECKER "Enable update checker for the Qt frontend" OFF)

+option(ENABLE_QT_TRANSLATION "Enable translations for the Qt frontend" OFF)
 CMAKE_DEPENDENT_OPTION(YUZU_USE_BUNDLED_QT "Download bundled Qt binaries" "${MSVC}" "ENABLE_QT" OFF)

 option(ENABLE_WEB_SERVICE "Enable web services (telemetry, etc.)" ON)

-option(YUZU_USE_BUNDLED_FFMPEG "Download/Build bundled FFmpeg" "ON")
+option(YUZU_USE_BUNDLED_FFMPEG "Download/Build bundled FFmpeg" "${WIN32}")

 option(YUZU_USE_EXTERNAL_VULKAN_HEADERS "Use Vulkan-Headers from externals" ON)

 option(YUZU_USE_EXTERNAL_VULKAN_UTILITY_LIBRARIES "Use Vulkan-Utility-Libraries from externals" ON)

-option(YUZU_USE_EXTERNAL_VULKAN_SPIRV_TOOLS "Use SPIRV-Tools from externals" ON)
-
 option(YUZU_USE_QT_MULTIMEDIA "Use QtMultimedia for Camera" OFF)

 option(YUZU_USE_QT_WEB_ENGINE "Use QtWebEngine for web applet implementation" OFF)
@@ -65,11 +61,7 @@ option(YUZU_USE_PRECOMPILED_HEADERS "Use precompiled headers" ON)

 option(YUZU_DOWNLOAD_ANDROID_VVL "Download validation layer binary for android" ON)

-CMAKE_DEPENDENT_OPTION(YUZU_ROOM "Enable dedicated room functionality" ON "NOT ANDROID" OFF)
-
-CMAKE_DEPENDENT_OPTION(YUZU_ROOM_STANDALONE "Enable standalone room executable" ON "YUZU_ROOM" OFF)
-
-CMAKE_DEPENDENT_OPTION(YUZU_CMD "Compile the eden-cli executable" ON "NOT ANDROID" OFF)
+CMAKE_DEPENDENT_OPTION(YUZU_ROOM "Compile LDN room server" ON "NOT ANDROID" OFF)

 CMAKE_DEPENDENT_OPTION(YUZU_CRASH_DUMPS "Compile crash dump (Minidump) support" OFF "WIN32 OR LINUX" OFF)

@@ -149,7 +141,7 @@ if (YUZU_USE_BUNDLED_VCPKG)
        set(VCPKG_DOWNLOADS_PATH ${PROJECT_SOURCE_DIR}/externals/vcpkg/downloads)
        set(NASM_VERSION "2.16.01")
        set(NASM_DESTINATION_PATH ${VCPKG_DOWNLOADS_PATH}/nasm-${NASM_VERSION}-win64.zip)
-        set(NASM_DOWNLOAD_URL "https://git.eden-emu.dev/eden-emu/ext-windows-bin/raw/master/nasm/nasm-${NASM_VERSION}-win64.zip")
+        set(NASM_DOWNLOAD_URL "https://github.com/eden-emulator/ext-windows-bin/raw/master/nasm/nasm-${NASM_VERSION}-win64.zip")

        if (NOT EXISTS ${NASM_DESTINATION_PATH})
            file(DOWNLOAD ${NASM_DOWNLOAD_URL} ${NASM_DESTINATION_PATH} SHOW_PROGRESS STATUS NASM_STATUS)
@@ -293,10 +285,6 @@ if (ARCHITECTURE_arm64 AND (ANDROID OR ${CMAKE_SYSTEM_NAME} STREQUAL "Linux"))
    add_definitions(-DHAS_NCE=1)
 endif()

-if (YUZU_ROOM)
-    add_definitions(-DYUZU_ROOM)
-endif()
-
 # Configure C++ standard
 # ===========================

@@ -311,7 +299,7 @@ set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/bin)

 # Enforce the search mode of non-required packages for better and shorter failure messages
 find_package(enet 1.3 MODULE)
-find_package(fmt 8 REQUIRED)
+find_package(fmt 10 REQUIRED)
 find_package(LLVM 17.0.2 MODULE COMPONENTS Demangle)
 find_package(lz4 REQUIRED)
 find_package(nlohmann_json 3.8 REQUIRED)
@@ -331,11 +319,6 @@ if (NOT YUZU_USE_EXTERNAL_VULKAN_UTILITY_LIBRARIES)
    find_package(VulkanUtilityLibraries REQUIRED)
 endif()

-if (NOT YUZU_USE_EXTERNAL_VULKAN_SPIRV_TOOLS)
-    find_package(PkgConfig REQUIRED)
-    pkg_check_modules(SPIRV-Tools REQUIRED SPIRV-Tools)
-endif()
-
 if (ENABLE_LIBUSB)
    find_package(libusb 1.0.24 MODULE)
 endif()
@@ -362,9 +345,6 @@ endif()

 if (ENABLE_WEB_SERVICE)
    find_package(cpp-jwt 1.4 CONFIG)
-endif()
-
-if (ENABLE_WEB_SERVICE OR ENABLE_QT_UPDATE_CHECKER)
    find_package(httplib 0.12 MODULE COMPONENTS OpenSSL)
 endif()

@@ -380,12 +360,17 @@ if (UNIX AND NOT APPLE)
    find_package(gamemode 1.7 MODULE)
 endif()

+# Please consider this as a stub
+if(ENABLE_QT6 AND Qt6_LOCATION)
+    list(APPEND CMAKE_PREFIX_PATH "${Qt6_LOCATION}")
+endif()
+
 # find SDL2 exports a bunch of variables that are needed, so its easier to do this outside of the YUZU_find_package
 if (ENABLE_SDL2)
    if (YUZU_USE_BUNDLED_SDL2)
        # Detect toolchain and platform
        if ((MSVC_VERSION GREATER_EQUAL 1920) AND ARCHITECTURE_x86_64)
-            set(SDL2_VER "SDL2-2.32.8")
+            set(SDL2_VER "SDL2-2.28.2")
        else()
            message(FATAL_ERROR "No bundled SDL2 binaries for your toolchain. Disable YUZU_USE_BUNDLED_SDL2 and provide your own.")
        endif()
@@ -409,24 +394,12 @@ if (ENABLE_SDL2)
    endif()
 endif()

-# List of all FFmpeg components required
-set(FFmpeg_COMPONENTS
-    avcodec
-    avfilter
-    avutil
-    swscale)
-
 add_subdirectory(externals)

+
 if (ENABLE_QT)
-    if (YUZU_USE_BUNDLED_QT)
-        download_qt(6.8.3)
-    else()
-        message(STATUS "Using system Qt")
-        if (NOT Qt6_DIR)
-            set(Qt6_DIR "" CACHE PATH "Additional path to search for Qt6 libraries like C:/Qt/6.8.3/msvc2022_64/lib/cmake/Qt6")
-        endif()
-		list(APPEND CMAKE_PREFIX_PATH "${Qt6_DIR}")
+    if (NOT USE_SYSTEM_QT)
+        download_qt(6.7.3)
    endif()

    find_package(Qt6 REQUIRED COMPONENTS Widgets Multimedia Concurrent)
@@ -453,7 +426,6 @@ if (ENABLE_QT)
    if (NOT DEFINED QT_HOST_PATH)
        set(QT_HOST_PATH "${QT_TARGET_PATH}")
    endif()
-
    message(STATUS "Using target Qt at ${QT_TARGET_PATH}")
    message(STATUS "Using host Qt at ${QT_HOST_PATH}")
 endif()
@@ -479,6 +451,13 @@ function(set_yuzu_qt_components)
    set(YUZU_QT_COMPONENTS ${YUZU_QT_COMPONENTS2} PARENT_SCOPE)
 endfunction(set_yuzu_qt_components)

+# List of all FFmpeg components required
+set(FFmpeg_COMPONENTS
+    avcodec
+    avfilter
+    avutil
+    swscale)
+
 if (UNIX AND NOT APPLE AND NOT ANDROID)
    find_package(PkgConfig REQUIRED)
    pkg_check_modules(LIBVA libva)
@@ -519,8 +498,6 @@ if (APPLE)
    # Umbrella framework for everything GUI-related
    find_library(COCOA_LIBRARY Cocoa)
    set(PLATFORM_LIBRARIES ${COCOA_LIBRARY} ${IOKIT_LIBRARY} ${COREVIDEO_LIBRARY})
-    find_library(ICONV_LIBRARY iconv REQUIRED)
-    list(APPEND PLATFORM_LIBRARIES ${ICONV_LIBRARY})
 elseif (WIN32)
    # Target Windows 10
    add_definitions(-D_WIN32_WINNT=0x0A00 -DWINVER=0x0A00)
@@ -548,7 +525,7 @@ if (NOT CLANG_FORMAT)
        message(STATUS "Clang format not found! Downloading...")
        set(CLANG_FORMAT "${PROJECT_BINARY_DIR}/externals/clang-format${CLANG_FORMAT_POSTFIX}.exe")
        file(DOWNLOAD
-            https://git.eden-emu.dev/eden-emu/ext-windows-bin/raw/master/clang-format${CLANG_FORMAT_POSTFIX}.exe
+            https://github.com/eden-emulator/ext-windows-bin/raw/master/clang-format${CLANG_FORMAT_POSTFIX}.exe
            "${CLANG_FORMAT}" SHOW_PROGRESS
            STATUS DOWNLOAD_SUCCESS)
        if (NOT DOWNLOAD_SUCCESS EQUAL 0)
@@ -664,14 +641,13 @@ endif()
 # https://specifications.freedesktop.org/shared-mime-info-spec/shared-mime-info-spec-latest.html
 # https://www.freedesktop.org/software/appstream/docs/
 if(ENABLE_QT AND UNIX AND NOT APPLE)
-    install(FILES "dist/org.eden_emu.eden.desktop"
+    install(FILES "dist/org.yuzu_emu.yuzu.desktop"
        DESTINATION "share/applications")
-    install(FILES "dist/org.eden_emu.eden.svg"
-        DESTINATION "share/icons/hicolor/scalable/apps")
-
-    # TODO: these files need to be updated.
-    install(FILES "dist/org.eden_emu.eden.xml"
+    install(FILES "dist/eden.svg"
+        DESTINATION "share/icons/hicolor/scalable/apps"
+        RENAME "org.yuzu_emu.eden.svg")
+    install(FILES "dist/org.yuzu_emu.yuzu.xml"
        DESTINATION "share/mime/packages")
-    install(FILES "dist/org.eden_emu.eden.metainfo.xml"
+    install(FILES "dist/org.yuzu_emu.yuzu.metainfo.xml"
        DESTINATION "share/metainfo")
 endif()
@@ -16,7 +16,7 @@ function(copy_yuzu_Qt6_deps target_dir)
    set(PLATFORMS ${DLL_DEST}plugins/platforms/)
    set(STYLES ${DLL_DEST}plugins/styles/)
    set(IMAGEFORMATS ${DLL_DEST}plugins/imageformats/)
-	set(RESOURCES ${DLL_DEST}resources/)
+
    if (MSVC)
        windows_copy_files(${target_dir} ${Qt6_DLL_DIR} ${DLL_DEST}
            Qt6Core$<$<CONFIG:Debug>:d>.*
@@ -31,31 +31,20 @@ function(copy_yuzu_Qt6_deps target_dir)
        endif()
        if (YUZU_USE_QT_WEB_ENGINE)
            windows_copy_files(${target_dir} ${Qt6_DLL_DIR} ${DLL_DEST}
-                Qt6OpenGL$<$<CONFIG:Debug>:d>.*
-                Qt6Positioning$<$<CONFIG:Debug>:d>.*
-                Qt6PrintSupport$<$<CONFIG:Debug>:d>.*
-                Qt6Qml$<$<CONFIG:Debug>:d>.*
-				Qt6QmlMeta$<$<CONFIG:Debug>:d>.*
-                Qt6QmlModels$<$<CONFIG:Debug>:d>.*
-				Qt6QmlWorkerScript$<$<CONFIG:Debug>:d>.*
-                Qt6Quick$<$<CONFIG:Debug>:d>.*
-                Qt6QuickWidgets$<$<CONFIG:Debug>:d>.*
-                Qt6WebChannel$<$<CONFIG:Debug>:d>.*
                Qt6WebEngineCore$<$<CONFIG:Debug>:d>.*
                Qt6WebEngineWidgets$<$<CONFIG:Debug>:d>.*
-				QtWebEngineProcess$<$<CONFIG:Debug>:d>.*
+                QtWebEngineProcess$<$<CONFIG:Debug>:d>.*
            )
-            windows_copy_files(${target_dir} ${Qt6_RESOURCES_DIR} ${RESOURCES}
+            windows_copy_files(${target_dir} ${Qt6_RESOURCES_DIR} ${DLL_DEST}
                icudtl.dat
                qtwebengine_devtools_resources.pak
                qtwebengine_resources.pak
                qtwebengine_resources_100p.pak
                qtwebengine_resources_200p.pak
-				v8_context_snapshot.bin
            )
        endif()
        windows_copy_files(yuzu ${Qt6_PLATFORMS_DIR} ${PLATFORMS} qwindows$<$<CONFIG:Debug>:d>.*)
-        windows_copy_files(yuzu ${Qt6_STYLES_DIR} ${STYLES} qmodernwindowsstyle$<$<CONFIG:Debug>:d>.*)
+        windows_copy_files(yuzu ${Qt6_STYLES_DIR} ${STYLES} qwindowsvistastyle$<$<CONFIG:Debug>:d>.*)
        windows_copy_files(yuzu ${Qt6_IMAGEFORMATS_DIR} ${IMAGEFORMATS}
            qjpeg$<$<CONFIG:Debug>:d>.*
            qgif$<$<CONFIG:Debug>:d>.*
@@ -63,6 +52,9 @@ function(copy_yuzu_Qt6_deps target_dir)
    else()
        # Update for non-MSVC platforms if needed
    endif()
-    # Fixes dark mode being forced automatically even when light theme is set in app settings.
-	file(WRITE "${CMAKE_BINARY_DIR}/bin/${CMAKE_BUILD_TYPE}/qt.conf" "[Platforms]\nWindowsArguments = darkmode=0")
+
+    # Create an empty qt.conf file
+    add_custom_command(TARGET yuzu POST_BUILD
+        COMMAND ${CMAKE_COMMAND} -E touch ${DLL_DEST}qt.conf
+    )
 endfunction(copy_yuzu_Qt6_deps)
@@ -1,4 +1,4 @@
-# SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
+# SPDX-FileCopyrightText: Copyright yuzu/Citra Emulator Project / Eden Emulator Project
 # SPDX-License-Identifier: GPL-3.0-or-later

 # This function downloads a binary library package from our external repo.
@@ -8,17 +8,17 @@
 set(CURRENT_MODULE_DIR ${CMAKE_CURRENT_LIST_DIR})
 function(download_bundled_external remote_path lib_name prefix_var)

-set(package_base_url "https://git.eden-emu.dev/eden-emu/")
+set(package_base_url "https://github.com/eden-emulator/")
 set(package_repo "no_platform")
 set(package_extension "no_platform")
 if (WIN32)
    set(package_repo "ext-windows-bin/raw/master/")
    set(package_extension ".7z")
 elseif (${CMAKE_SYSTEM_NAME} STREQUAL "Linux")
-    set(package_repo "ext-linux-bin/raw/master/")
+    set(package_repo "ext-linux-bin/raw/main/")
    set(package_extension ".tar.xz")
 elseif (ANDROID)
-    set(package_repo "ext-android-bin/raw/master/")
+    set(package_repo "ext-android-bin/raw/main/")
    set(package_extension ".tar.xz")
 else()
    message(FATAL_ERROR "No package available for this platform")
@@ -68,22 +68,22 @@ function(determine_qt_parameters target host_out type_out arch_out arch_path_out
                set(arch_path "mingw_64")
            elseif (MSVC)
                if ("arm64" IN_LIST ARCHITECTURE)
-                    set(arch_path "msvc2022_arm64")
+                    set(arch_path "msvc2019_arm64")
                elseif ("x86_64" IN_LIST ARCHITECTURE)
-                    set(arch_path "msvc2022_64")
+                    set(arch_path "msvc2019_64")
                else()
-                    message(FATAL_ERROR "Unsupported bundled Qt architecture. Disable YUZU_USE_BUNDLED_QT and provide your own.")
+                    message(FATAL_ERROR "Unsupported bundled Qt architecture. Enable USE_SYSTEM_QT and provide your own.")
                endif()
                set(arch "win64_${arch_path}")

                if (CMAKE_HOST_SYSTEM_PROCESSOR STREQUAL "AMD64")
-                    set(host_arch_path "msvc2022_64")
+                    set(host_arch_path "msvc2019_64")
                elseif (CMAKE_HOST_SYSTEM_PROCESSOR STREQUAL "ARM64")
-                    set(host_arch_path "msvc2022_arm64")
+                    set(host_arch_path "msvc2019_64")
                endif()
                set(host_arch "win64_${host_arch_path}")
            else()
-                message(FATAL_ERROR "Unsupported bundled Qt toolchain. Disable YUZU_USE_BUNDLED_QT and provide your own.")
+                message(FATAL_ERROR "Unsupported bundled Qt toolchain. Enable USE_SYSTEM_QT and provide your own.")
            endif()
        endif()
    elseif (APPLE)
@@ -133,12 +133,13 @@ function(download_qt_configuration prefix_out target host type arch arch_path ba
        set(install_args ${install_args} install-tool --outputdir ${base_path} ${host} desktop ${target})
    else()
        set(prefix "${base_path}/${target}/${arch_path}")
-        set(install_args ${install_args} install-qt --outputdir ${base_path} ${host} ${type} ${target} ${arch} -m qt3d qt5compat qtactiveqt qtcharts qtconnectivity qtdatavis3d qtgraphs qtgrpc qthttpserver qtimageformats qtlanguageserver qtlocation qtlottie qtmultimedia qtnetworkauth qtpdf qtpositioning qtquick3d qtquick3dphysics qtquickeffectmaker qtquicktimeline qtremoteobjects qtscxml qtsensors qtserialbus qtserialport qtshadertools qtspeech qtvirtualkeyboard qtwebchannel qtwebengine qtwebsockets qtwebview)
+        set(install_args ${install_args} install-qt --outputdir ${base_path} ${host} ${type} ${target} ${arch}
+                -m qtmultimedia --archives qttranslations qttools qtsvg qtbase)
    endif()

    if (NOT EXISTS "${prefix}")
        message(STATUS "Downloading Qt binaries for ${target}:${host}:${type}:${arch}:${arch_path}")
-        set(AQT_PREBUILD_BASE_URL "https://github.com/miurahr/aqtinstall/releases/download/v3.2.1")
+        set(AQT_PREBUILD_BASE_URL "https://github.com/miurahr/aqtinstall/releases/download/v3.1.18")
        if (WIN32)
            set(aqt_path "${base_path}/aqt.exe")
            if (NOT EXISTS "${aqt_path}")
@@ -1,29 +0,0 @@
-# SPDX-FileCopyrightText: Copyright 2025 Eden Emulator Project
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-find_package(PkgConfig QUIET)
-pkg_search_module(IW QUIET IMPORTED_TARGET iw)
-
-include(FindPackageHandleStandardArgs)
-find_package_handle_standard_args(Libiw
-    REQUIRED_VARS IW_LIBRARIES IW_INCLUDE_DIRS
-    VERSION_VAR IW_VERSION
-    FAIL_MESSAGE "libiw (Wireless Tools library) not found. Please install libiw-dev (Debian/Ubuntu), wireless-tools-devel (Fedora), wireless_tools (Arch), or net-wireless/iw (Gentoo)."
-)
-
-if (Libiw_FOUND AND TARGET PkgConfig::IW AND NOT TARGET iw::iw)
-    add_library(iw::iw ALIAS PkgConfig::IW)
-endif()
-
-if(Libiw_FOUND)
-    mark_as_advanced(
-        IW_INCLUDE_DIRS
-        IW_LIBRARIES
-        IW_LIBRARY_DIRS
-        IW_LINK_LIBRARIES # Often set by pkg-config
-        IW_LDFLAGS
-        IW_CFLAGS
-        IW_CFLAGS_OTHER
-        IW_VERSION
-    )
-endif()
@@ -20,19 +20,37 @@ if (NOT GIT_BRANCH)
 endif()
 get_timestamp(BUILD_DATE)

-git_get_exact_tag(GIT_TAG --tags)
-if (GIT_TAG MATCHES "NOTFOUND")
-  set(BUILD_VERSION "${GIT_DESC}")
-  set(IS_DEV_BUILD true)
-else()
-  set(BUILD_VERSION ${GIT_TAG})
-  set(IS_DEV_BUILD false)
-endif()
-
 # Generate cpp with Git revision from template
 # Also if this is a CI build, add the build name (ie: Nightly, Canary) to the scm_rev file as well
-set(REPO_NAME "eden")
-set(BUILD_ID ${GIT_BRANCH})
-set(BUILD_FULLNAME "${REPO_NAME} ${BUILD_VERSION} ")
+set(REPO_NAME "")
+set(BUILD_VERSION "0")
+set(BUILD_ID ${DISPLAY_VERSION})
+if (BUILD_REPOSITORY)
+  # regex capture the string nightly or canary into CMAKE_MATCH_1
+  string(REGEX MATCH "yuzu-emu/yuzu-?(.*)" OUTVAR ${BUILD_REPOSITORY})
+  if ("${CMAKE_MATCH_COUNT}" GREATER 0)
+    # capitalize the first letter of each word in the repo name.
+    string(REPLACE "-" ";" REPO_NAME_LIST ${CMAKE_MATCH_1})
+    foreach(WORD ${REPO_NAME_LIST})
+      string(SUBSTRING ${WORD} 0 1 FIRST_LETTER)
+      string(SUBSTRING ${WORD} 1 -1 REMAINDER)
+      string(TOUPPER ${FIRST_LETTER} FIRST_LETTER)
+      set(REPO_NAME "${REPO_NAME}${FIRST_LETTER}${REMAINDER}")
+    endforeach()
+    if (BUILD_TAG)
+      string(REGEX MATCH "${CMAKE_MATCH_1}-([0-9]+)" OUTVAR ${BUILD_TAG})
+      if (${CMAKE_MATCH_COUNT} GREATER 0)
+        set(BUILD_VERSION ${CMAKE_MATCH_1})
+      endif()
+      if (BUILD_VERSION)
+        # This leaves a trailing space on the last word, but we actually want that
+        # because of how it's styled in the title bar.
+        set(BUILD_FULLNAME "${REPO_NAME} ${BUILD_VERSION} ")
+      else()
+        set(BUILD_FULLNAME "")
+      endif()
+    endif()
+  endif()
+endif()

 configure_file(scm_rev.cpp.in scm_rev.cpp @ONLY)
@@ -1,6 +1,3 @@
-# SPDX-FileCopyrightText: 2025 Eden Emulator Project
-# SPDX-License-Identifier: GPL-3.0-or-later
-
 # SPDX-FileCopyrightText: 2018 yuzu Emulator Project
 # SPDX-License-Identifier: GPL-2.0-or-later

@@ -10,7 +7,7 @@ Type=Application
 Name=eden
 GenericName=Switch Emulator
 Comment=Nintendo Switch video game console emulator
-Icon=org.eden_emu.eden
+Icon=org.yuzu_emu.eden
 TryExec=eden
 Exec=eden %f
 Categories=Game;Emulator;Qt;
@@ -38,18 +38,6 @@ QPushButton#RendererStatusBarButton:!checked {
    color: #0066ff;
 }

-QPushButton#RefreshButton {
-    color: #656565;
-    border: 1px solid transparent;
-    background-color: transparent;
-    padding: 0px 3px 0px 3px;
-    text-align: center;
-}
-
-QPushButton#RefreshButton:hover {
-    border: 1px solid #76797C;
-}
-
 QPushButton#GPUStatusBarButton {
    color: #656565;
    border: 1px solid transparent;
@@ -42,18 +42,6 @@ QPushButton#RendererStatusBarButton:!checked {
    color: #00ccdd;
 }

-QPushButton#RefreshButton {
-    color: #656565;
-    border: 1px solid transparent;
-    background-color: transparent;
-    padding: 0px 3px 0px 3px;
-    text-align: center;
-}
-
-QPushButton#RefreshButton:hover {
-    border: 1px solid #76797C;
-}
-
 QPushButton#GPUStatusBarButton {
    color: #656565;
    border: 1px solid transparent;
@@ -1283,19 +1283,6 @@ QPushButton#RendererStatusBarButton:!checked {
    color: #00ccdd;
 }

-QPushButton#RefreshButton {
-    min-width: 0px;
-    color: #656565;
-    border: 1px solid transparent;
-    background-color: transparent;
-    padding: 0px 3px 0px 3px;
-    text-align: center;
-}
-
-QPushButton#RefreshButton:hover {
-    border: 1px solid #76797C;
-}
-
 QPushButton#GPUStatusBarButton {
    min-width: 0px;
    color: #656565;
@@ -2186,19 +2186,6 @@ QPushButton#RendererStatusBarButton:!checked {
  color: #00ccdd;
 }

-QPushButton#RefreshButton {
-  min-width: 0px;
-  color: #656565;
-  border: 1px solid transparent;
-  background-color: transparent;
-  padding: 0px 3px 0px 3px;
-  text-align: center;
-}
-
-QPushButton#RefreshButton:hover {
-  border: 1px solid #76797C;
-}
-
 QPushButton#GPUStatusBarButton {
  min-width: 0px;
  color: #656565;
@@ -119,7 +119,7 @@ endif()
 add_subdirectory(sirit)

 # httplib
-if ((ENABLE_WEB_SERVICE OR ENABLE_QT_UPDATE_CHECKER) AND NOT TARGET httplib::httplib)
+if (ENABLE_WEB_SERVICE AND NOT TARGET httplib::httplib)
    set(HTTPLIB_REQUIRE_OPENSSL ON)
    add_subdirectory(cpp-httplib)
 endif()
@@ -160,12 +160,6 @@ if (YUZU_USE_EXTERNAL_VULKAN_UTILITY_LIBRARIES)
    add_subdirectory(Vulkan-Utility-Libraries)
 endif()

-# SPIRV-Tools
-if (YUZU_USE_EXTERNAL_VULKAN_SPIRV_TOOLS)
-    set(SPIRV_SKIP_EXECUTABLES ON)
-    add_subdirectory(SPIRV-Tools)
-endif()
-
 # Boost headers
 add_subdirectory(boost-headers)

@@ -1,9 +0,0 @@
-# Defines the Chromium style for automatic reformatting.
-# https://clang.llvm.org/docs/ClangFormatStyleOptions.html
-BasedOnStyle: Chromium
-
-# This defaults to 'Auto'. Explicitly set it for a while, so that
-# 'vector<vector<int> >' in existing files gets formatted to
-# 'vector<vector<int>>'. ('Auto' means that clang-format will only use
-# 'int>>' if the file already contains at least one such instance.)
-Standard: Cpp11
@@ -1,73 +0,0 @@
-# GitHub actions workflow.
-# https://docs.github.com/en/actions/learn-github-actions/workflow-syntax-for-github-actions
-
-name: Build+Test CI
-
-on:
-  push:
-    branches: [main]
-
-  schedule:
-    # The GH mirroring from Google GoB does not trigger push actions.
-    # Fire it every other day to provide some coverage.  This will run ~8 AM PT.
-    - cron: '39 3 */2 * *'
-
-  # Allow for manual triggers from the web.
-  workflow_dispatch:
-
-jobs:
-  autotools:
-    strategy:
-      fail-fast: false
-      matrix:
-        include:
-          - os: ubuntu-latest
-            cc: gcc
-            cxx: g++
-          - os: ubuntu-latest
-            cc: clang
-            cxx: clang++
-          - os: macos-latest
-            cc: clang
-            cxx: clang++
-    runs-on: ${{ matrix.os }}
-    env:
-      CC: ${{ matrix.cc }}
-      CXX: ${{ matrix.cxx }}
-
-    steps:
-    - name: System settings
-      run: |
-        set -x
-        $CC --version
-        $CXX --version
-        getconf _NPROCESSORS_ONLN
-        getconf _NPROCESSORS_CONF
-        true
-
-    - name: Checkout depot_tools
-      run: git clone --depth=1 https://chromium.googlesource.com/chromium/tools/depot_tools.git ../depot_tools
-
-    - name: Checkout breakpad
-      run: |
-        set -xe
-        PATH+=:$PWD/../depot_tools
-        gclient config --unmanaged --name=src https://github.com/${{ github.repository }}
-        gclient sync --no-history --nohooks
-
-    # First build & test in-tree.
-    - run: ./configure --disable-silent-rules
-      working-directory: src
-    - run: make -j$(getconf _NPROCESSORS_CONF)
-      working-directory: src
-    - run: make -j$(getconf _NPROCESSORS_CONF) check VERBOSE=1
-      working-directory: src
-    - run: make -j$(getconf _NPROCESSORS_CONF) distclean
-      working-directory: src
-
-    # Then build & test out-of-tree.
-    - run: mkdir -p src/build/native
-    - run: ../../configure --disable-silent-rules
-      working-directory: src/build/native
-    - run: make -j$(getconf _NPROCESSORS_CONF) distcheck VERBOSE=1
-      working-directory: src/build/native
@@ -1,22 +0,0 @@
-# GitHub actions workflow.
-# https://docs.github.com/en/actions/learn-github-actions/workflow-syntax-for-github-actions
-
-# https://github.com/superbrothers/close-pull-request
-name: Close Pull Request
-
-on:
-  pull_request_target:
-    types: [opened]
-
-jobs:
-  run:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: superbrothers/close-pull-request@v3
-      with:
-        comment: >
-          Thanks for your contribution!
-          Unfortunately, we don't use GitHub pull requests to manage code
-          contributions to this repository.
-          Instead, please see [README.md](../blob/HEAD/README.md) which
-          provides full instructions on how to get involved.
@@ -1,43 +0,0 @@
-# GitHub actions workflow.
-# https://docs.github.com/en/actions/learn-github-actions/workflow-syntax-for-github-actions
-
-# https://scan.coverity.com/projects/google-breakpad
-name: Coverity Scan
-
-on:
-  push:
-    branches: [main]
-
-  schedule:
-    # The GH mirroring from Google GoB does not trigger push actions.
-    # Fire it once a week to provide some coverage.
-    - cron: '39 2 * * WED'
-
-  # Allow for manual triggers from the web.
-  workflow_dispatch:
-
-jobs:
-  coverity:
-    runs-on: ubuntu-latest
-    env:
-      CC: clang
-      CXX: clang++
-    steps:
-    - name: Checkout depot_tools
-      run: git clone --depth=1 https://chromium.googlesource.com/chromium/tools/depot_tools.git ../depot_tools
-
-    - name: Checkout breakpad
-      run: |
-        set -xe
-        PATH+=:$PWD/../depot_tools
-        gclient config --unmanaged --name=src https://github.com/${{ github.repository }}
-        gclient sync --no-history --nohooks
-
-    - run: ./configure --disable-silent-rules
-      working-directory: src
-
-    - uses: vapier/coverity-scan-action@v1
-      with:
-        command: make -C src -O -j$(getconf _NPROCESSORS_CONF)
-        email: ${{ secrets.COVERITY_SCAN_EMAIL }}
-        token: ${{ secrets.COVERITY_SCAN_TOKEN }}
@@ -1,90 +0,0 @@
-# Copyright 2014 Google LLC
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google LLC nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Ignore other VCSs.
-.repo/
-.svn/
-
-# Ignore common compiled artifacts.
-*~
-*.dwo
-*.o
-lib*.a
-/breakpad.pc
-/breakpad-client.pc
-/src/client/linux/linux_client_unittest_shlib
-/src/client/linux/linux_dumper_unittest_helper
-/src/common/linux/google_crashdump_uploader_test
-/src/processor/microdump_stackwalk
-/src/processor/minidump_dump
-/src/processor/minidump_stackwalk
-/src/tools/linux/core2md/core2md
-/src/tools/linux/core_handler/core_handler
-/src/tools/linux/dump_syms/dump_syms
-/src/tools/linux/md2core/minidump-2-core
-/src/tools/linux/pid2md/pid2md
-/src/tools/linux/symupload/minidump_upload
-/src/tools/linux/symupload/sym_upload
-/src/tools/mac/dump_syms/dump_syms
-/src/tools/mac/dump_syms/dump_syms_mac
-
-# Ignore unit test artifacts.
-*_unittest
-*.log
-*.trs
-
-# Ignore autotools generated artifacts.
-.deps
-.dirstamp
-autom4te.cache/
-/config.cache
-config.h
-/config.log
-/config.status
-/Makefile
-stamp-h1
-
-# Ignore generated Visual Studio artifacts.
-*.filters
-*.sdf
-*.sln
-*.suo
-*.vcproj
-*.vcxproj
-
-# Ignore generated Makefiles
-src/Makefile
-*.Makefile
-*.target.mk
-
-# Ignore compiled Python files.
-*.pyc
-
-# Ignore directories gclient syncs.
-src/testing
-src/third_party/protobuf
@@ -1 +0,0 @@
-opensource@google.com
@@ -1,58 +0,0 @@
-# Copyright 2010 Google LLC
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google LLC nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# This is used to mimic the svn:externals mechanism for gclient (both Git and
-# SVN) based checkouts of Breakpad. As such, its use is entirely optional. If
-# using a manually managed SVN checkout as opposed to a gclient managed checkout
-# you can still use the hooks mechanism for generating project files by calling
-# 'gclient runhooks' rather than 'gclient sync'.
-
-deps = {
-  # Testing libraries and utilities.
-  "src/src/testing":
-    "https://github.com/google/googletest.git" +
-      "@release-1.11.0",
-
-  # Protobuf.
-  "src/src/third_party/protobuf/protobuf":
-    "https://github.com/google/protobuf.git" +
-      "@cb6dd4ef5f82e41e06179dcd57d3b1d9246ad6ac",
-
-  # Linux syscall support.
-  "src/src/third_party/lss":
-    "https://chromium.googlesource.com/linux-syscall-support/" +
-      "@9719c1e1e676814c456b55f5f070eabad6709d31",
-}
-
-hooks = [
-  {
-    # Keep the manifest up to date.
-    "action": ["src/src/tools/python/deps-to-manifest.py",
-               "src/DEPS", "src/default.xml"],
-  },
-]
@@ -1,13 +0,0 @@
-# Metadata information for this directory.
-#
-# For more information on DIR_METADATA files, see:
-#   https://source.chromium.org/chromium/infra/infra/+/HEAD:go/src/infra/tools/dirmd/README.md
-#
-# For the schema of this file, see Metadata message:
-#   https://source.chromium.org/chromium/infra/infra/+/HEAD:go/src/infra/tools/dirmd/proto/dir_metadata.proto
-
-monorail {
-  project: "google-breakpad"
-}
-
-team_email: "google-breakpad-dev@googlegroups.com"
@@ -1,370 +0,0 @@
-Installation Instructions
-*************************
-
-Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
-Inc.
-
-   Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.  This file is offered as-is,
-without warranty of any kind.
-
-Basic Installation
-==================
-
-   Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package.  The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.  Some packages provide this
-`INSTALL' file but do not implement all of the features documented
-below.  The lack of an optional feature in a given package is not
-necessarily a bug.  More recommendations for GNU packages can be found
-in *note Makefile Conventions: (standards)Makefile Conventions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
-   The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.
-
-     Running `configure' might take a while.  While running, it prints
-     some messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package, generally using the just-built uninstalled binaries.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.  When installing into a prefix owned by root, it is
-     recommended that the package be configured and built as a regular
-     user, and only the `make install' phase executed with root
-     privileges.
-
-  5. Optionally, type `make installcheck' to repeat any self-tests, but
-     this time using the binaries in their final installed location.
-     This target does not install anything.  Running this target as a
-     regular user, particularly if the prior `make install' required
-     root privileges, verifies that the installation completed
-     correctly.
-
-  6. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-  7. Often, you can also type `make uninstall' to remove the installed
-     files again.  In practice, not all packages have tested that
-     uninstallation works correctly, even though it is required by the
-     GNU Coding Standards.
-
-  8. Some packages, particularly those that use Automake, provide `make
-     distcheck', which can by used by developers to test that all other
-     targets like `make install' and `make uninstall' work correctly.
-     This target is generally not run by end users.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
-for details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.  This
-is known as a "VPATH" build.
-
-   With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
-   On MacOS X 10.5 and later systems, you can create libraries and
-executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor.  Like
-this:
-
-     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
-                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
-                 CPP="gcc -E" CXXCPP="g++ -E"
-
-   This is not guaranteed to produce working output in all cases, you
-may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
-
-Installation Names
-==================
-
-   By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
-absolute file name.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.  In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
-specifications that were not explicitly provided.
-
-   The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
-both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
-having to reconfigure or recompile.
-
-   The first method involves providing an override variable for each
-affected directory.  For example, `make install
-prefix=/alternate/directory' will choose an alternate location for all
-directory configuration variables that were expressed in terms of
-`${prefix}'.  Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated.  The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
-   The second method involves providing the `DESTDIR' variable.  For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names.  The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
-does not work on platforms that have drive letters.  On the other hand,
-it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
-
-Optional Features
-=================
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-   Some packages offer the ability to configure how verbose the
-execution of `make' will be.  For these packages, running `./configure
--enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
--disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
-
-Particular systems
-==================
-
-   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
-CC is not installed, it is recommended to use the following options in
-order to use an ANSI C compiler:
-
-     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
-
-and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-
-   HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved.  Use GNU `make'
-instead.
-
-   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
-a workaround.  If GNU CC is not installed, it is therefore recommended
-to try
-
-     ./configure CC="cc"
-
-and if that doesn't work, try
-
-     ./configure CC="cc -nodtk"
-
-   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
-directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
-
-   On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'.  It is recommended to use the following options:
-
-     ./configure --prefix=/boot/common
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS
-     KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-   Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf limitation.  Until the limitation is lifted, you can use
-this workaround:
-
-     CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
-     Print a summary of all of the options to `configure', and exit.
-
-`--help=short'
-`--help=recursive'
-     Print a summary of the options unique to this package's
-     `configure', and exit.  The `short' variant lists options used
-     only in the top level, while the `recursive' variant lists options
-     also present in any nested packages.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`--prefix=DIR'
-     Use DIR as the installation prefix.  *note Installation Names::
-     for more details, including other options available for fine-tuning
-     the installation locations.
-
-`--no-create'
-`-n'
-     Run the configure checks, but stop before creating any output
-     files.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
@@ -1,13 +0,0 @@
-# Sorted alphabetically.
-# Please see README.md for contact info.
-
-ivanpe@chromium.org
-jperaza@chromium.org
-mark@chromium.org
-nbilling@google.com
-primiano@chromium.org
-saugustine@google.com
-rsesek@chromium.org
-ted@mielczarek.org
-thestig@chromium.org
-vapier@chromium.org
@@ -1,139 +0,0 @@
-Google Breakpad for Android
-===========================
-
-This document explains how to use the Google Breakpad client library
-on Android, and later generate valid stack traces from the minidumps
-it generates.
-
-This release supports ARM, x86 and MIPS based Android systems.
-This release requires NDK release r11c or higher.
-
-I. Building the client library:
-===============================
-
-The Android client is built as a static library that you can
-link into your own Android native code. There are two ways to
-build it:
-
-I.1. Building with ndk-build:
-----------------------------
-
-If you're using the ndk-build build system, you can follow
-these simple steps:
-
-  1/ Include android/google_breakpad/Android.mk from your own
-     project's Android.mk
-
-     This can be done either directly, or using ndk-build's
-     import-module feature.
-
-  2/ Link the library to one of your modules by using:
-
-     LOCAL_STATIC_LIBRARIES += breakpad_client
-
-NOTE: The client library requires a C++ STL implementation,
-      which you can select with APP_STL in your Application.mk
-
-      It has been tested succesfully with both STLport and GNU libstdc++
-
-
-I.2. Building with a standalone Android toolchain:
--------------------------------------------------
-
-All you need to do is configure your build with the right 'host'
-value, and disable the processor and tools, as in:
-
-  $GOOGLE_BREAKPAD_PATH/configure --host=arm-linux-androideabi \
-                                  --disable-processor \
-                                  --disable-tools
-  make -j4
-
-The library will be under src/client/linux/libbreakpad_client.a
-
-You can also use 'make check' to run the test suite on a connected
-Android device. This requires the Android 'adb' tool to be in your
-path.
-
-II. Using the client library in Android:
-========================================
-
-The usage instructions are very similar to the Linux ones that are
-found at https://chromium.googlesource.com/breakpad/breakpad/+/master/docs/linux_starter_guide.md
-
-1/ You need to include "client/linux/handler/exception_handler.h" from a C++
-   source file.
-
-2/ If you're not using ndk-build, you also need to:
-
-   - add the following to your compiler include search paths:
-       $GOOGLE_BREAKPAD_PATH/src
-       $GOOGLE_BREAKPAD_PATH/src/common/android/include
-
-   - add -llog to your linker flags
-
-   Note that ndk-build does that for your automatically.
-
-3/ Keep in mind that there is no /tmp directory on Android.
-
-   If you use the library from a regular Android applications, specify a
-   path under your app-specific storage directory. An alternative is to
-   store them on the SDCard, but this requires a specific permission.
-
-For a concrete example, see the sample test application under
-android/sample_app. See its README for more information.
-
-
-III. Getting a stack trace on the host:
-=======================================
-
-This process is similar to other platforms, but here's a quick example:
-
-1/ Retrieve the minidumps on your development machine.
-
-2/ Dump the symbols for your native libraries with the 'dump_syms' tool.
-   This first requires building the host version of Google Breakpad, then
-   calling:
-
-      dump_syms $PROJECT_PATH/obj/local/$ABI/libfoo.so > libfoo.so.sym
-
-3/ Create the symbol directory hierarchy.
-
-   The first line of the generated libfoo.so.sym will have a "MODULE"
-   entry that carries a hexadecimal version number, e.g.:
-
-     MODULE Linux arm D51B4A5504974FA6ECC1869CAEE3603B0 test_google_breakpad
-
-   Note: The second field could be either 'Linux' or 'Android'.
-
-   Extract the version number, and a 'symbol' directory, for example:
-
-      $PROJECT_PATH/symbols/libfoo.so/$VERSION/
-
-   Copy/Move your libfoo.sym file there.
-
-4/ Invoke minidump_stackwalk to create the stack trace:
-
-     minidump_stackwalk $MINIDUMP_FILE $PROJECT_PATH/symbols
-
-Note that various helper scripts can be found on the web to automate these
-steps.
-
-IV. Verifying the Android build library:
-========================================
-
-If you modify Google Breakpad and want to check that it still works correctly
-on Android, please run the android/run-checks.sh script which will do all
-necessary verifications for you. This includes:
-
-  - Rebuilding the full host binaries.
-  - Rebuilding the full Android binaries with configure/make.
-  - Rebuilding the client library unit tests, and running them on a device.
-  - Rebuilding the client library with ndk-build.
-  - Building, installing and running a test crasher program on a device.
-  - Extracting the corresponding minidump, dumping the test program symbols
-    and generating a stack trace.
-  - Checking the generated stack trace for valid source locations.
-
-For more details, please run:
-
-  android/run-checks.sh --help-all
@@ -1,82 +0,0 @@
-# Breakpad
-
-Breakpad is a set of client and server components which implement a
-crash-reporting system.
-
-* [Homepage](https://chromium.googlesource.com/breakpad/breakpad/)
-* [Documentation](./docs/)
-* [Bugs](https://bugs.chromium.org/p/google-breakpad/)
-* Discussion/Questions: [google-breakpad-discuss@googlegroups.com](https://groups.google.com/d/forum/google-breakpad-discuss)
-* Developer/Reviews: [google-breakpad-dev@googlegroups.com](https://groups.google.com/d/forum/google-breakpad-dev)
-* Tests: [![Build+Test CI](https://github.com/google/breakpad/actions/workflows/build-test-ci.yml/badge.svg)](https://github.com/google/breakpad/actions/workflows/build-test-ci.yml) [![Build status](https://ci.appveyor.com/api/projects/status/eguv4emv2rhq68u2?svg=true)](https://ci.appveyor.com/project/vapier/breakpad)
-* Coverage [![Coverity Status](https://scan.coverity.com/projects/9215/badge.svg)](https://scan.coverity.com/projects/google-breakpad)
-
-## Getting started (from main)
-
-1.  First, [download depot_tools](http://dev.chromium.org/developers/how-tos/install-depot-tools)
-    and ensure that they’re in your `PATH`.
-
-2.  Create a new directory for checking out the source code (it must be named
-    breakpad).
-
-    ```sh
-    mkdir breakpad && cd breakpad
-    ```
-
-3.  Run the `fetch` tool from depot_tools to download all the source repos.
-
-    ```sh
-    fetch breakpad
-    cd src
-    ```
-
-4.  Build the source.
-
-    ```sh
-    ./configure && make
-    ```
-
-    You can also cd to another directory and run configure from there to build
-    outside the source tree.
-
-    This will build the processor tools (`src/processor/minidump_stackwalk`,
-    `src/processor/minidump_dump`, etc), and when building on Linux it will
-    also build the client libraries and some tools
-    (`src/tools/linux/dump_syms/dump_syms`,
-    `src/tools/linux/md2core/minidump-2-core`, etc).
-
-5.  Optionally, run tests.
-
-    ```sh
-    make check
-    ```
-
-6.  Optionally, install the built libraries
-
-    ```sh
-    make install
-    ```
-
-If you need to reconfigure your build be sure to run `make distclean` first.
-
-To update an existing checkout to a newer revision, you can
-`git pull` as usual, but then you should run `gclient sync` to ensure that the
-dependent repos are up-to-date.
-
-## To request change review
-
-1.  Follow the steps above to get the source and build it.
-
-2.  Make changes. Build and test your changes.
-    For core code like processor use methods above.
-    For linux/mac/windows, there are test targets in each project file.
-
-3.  Commit your changes to your local repo and upload them to the server.
-    http://dev.chromium.org/developers/contributing-code
-    e.g. `git commit ... && git cl upload ...`
-    You will be prompted for credential and a description.
-
-4.  At https://chromium-review.googlesource.com/ you'll find your issue listed;
-    click on it, then “Add reviewer”, and enter in the code reviewer. Depending
-    on your settings, you may not see an email, but the reviewer has been
-    notified with google-breakpad-dev@googlegroups.com always CC’d.
@@ -1,371 +0,0 @@
-# Copyright 2012 Google LLC
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google LLC nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Collection of common shell functions for 'run-checks.sh' et 'test-shell.sh'
-
-# All internal variables and functions use an underscore as a prefix
-# (e.g. _VERBOSE, _ALL_CLEANUPS, etc..).
-
-# Sanitize the environment
-export LANG=C
-export LC_ALL=C
-
-if [ "$BASH_VERSION" ]; then
-  set -o posix
-fi
-
-# Utility functions
-
-_ALL_CLEANUPS=
-
-# Register a function to be called when the script exits, even in case of
-# Ctrl-C, logout, etc.
-# $1: function name.
-atexit () {
-  if [ -z "$_ALL_CLEANUPS" ]; then
-    _ALL_CLEANUPS=$1
-    # Ensure a clean exit when the script is:
-    #  - Exiting normally (EXIT)
-    #  - Interrupted by Ctrl-C (INT)
-    #  - Interrupted by log out (HUP)
-    #  - Being asked to quit nicely (TERM)
-    #  - Being asked to quit and dump core (QUIT)
-    trap "_exit_cleanups \$?" EXIT INT HUP QUIT TERM
-  else
-    _ALL_CLEANUPS="$_ALL_CLEANUPS $1"
-  fi
-}
-
-# Called on exit if at least one function was registered with atexit
-# $1: final exit status code
-_exit_cleanups () {
-  local CLEANUP CLEANUPS
-  # Ignore calls to atexit during cleanups
-  CLEANUPS=$_ALL_CLEANUPS
-  _ALL_CLEANUPS=
-  for CLEANUP in $CLEANUPS; do
-    ($CLEANUP)
-  done
-  exit "$@"
-}
-
-
-
-
-# Dump a panic message then exit.
-# $1+: message
-panic () {
-  echo "ERROR: $@" >&2
-  exit 1
-}
-
-# If the previous command failed, dump a panic message then exit.
-# $1+: message.
-fail_panic () {
-  if [ $? != 0 ]; then
-    panic "$@"
-  fi;
-}
-
-_VERBOSE=0
-
-# Increase verbosity for dump/log/run/run2 functions
-increase_verbosity () {
-  _VERBOSE=$(( $_VERBOSE + 1 ))
-}
-
-# Decrease verbosity
-decrease_verbosity () {
-  _VERBOSE=$(( $_VERBOSE - 1 ))
-}
-
-# Returns success iff verbosity level is higher than a specific value
-# $1: verbosity level
-verbosity_is_higher_than () {
-  [ "$_VERBOSE" -gt "$1" ]
-}
-
-# Returns success iff verbosity level is lower than a specific value
-# $1: verbosity level
-verbosity_is_lower_than () {
-  [ "$_VERBOSE" -le "$1" ]
-}
-
-# Dump message to stdout, unless verbosity is < 0, i.e. --quiet was called
-# $1+: message
-dump () {
-  if [ "$_VERBOSE" -ge 0 ]; then
-    printf "%s\n" "$*"
-  fi
-}
-
-# If --verbose was used, dump a message to stdout.
-# $1+: message
-log () {
-  if [ "$_VERBOSE" -ge 1 ]; then
-    printf "%s\n" "$*"
-  fi
-}
-
-_RUN_LOG=
-
-# Set a run log file that can be used to collect the output of commands that
-# are not displayed.
-set_run_log () {
-  _RUN_LOG=$1
-}
-
-# Run a command. Output depends on $_VERBOSE:
-#   $_VERBOSE <= 0:  Run command, store output into the run log
-#   $_VERBOSE >= 1:  Dump command, run it, output goest to stdout
-# Note: Ideally, the command's output would go to the run log for $_VERBOSE >= 1
-#       but the 'tee' tool doesn't preserve the status code of its input pipe
-#       in case of error.
-run () {
-  local LOGILE
-  if [ "$_RUN_LOG" ]; then
-    LOGFILE=$_RUN_LOG
-  else
-    LOGFILE=/dev/null
-  fi
-
-  if [ "$_VERBOSE" -ge 1 ]; then
-    echo "COMMAND: $@"
-    "$@"
-  else
-    "$@" >>$LOGFILE 2>&1
-  fi
-}
-
-# Same as run(), but only dump command output for $_VERBOSE >= 2
-run2 () {
-  local LOGILE
-  if [ "$_RUN_LOG" ]; then
-    LOGFILE=$_RUN_LOG
-  else
-    LOGFILE=/dev/null
-  fi
-
-  if [ "$_VERBOSE" -ge 1 ]; then
-    echo "COMMAND: $@"
-  fi
-  if [ "$_VERBOSE" -ge 2 ]; then
-    "$@"
-  else
-    "$@" >>$LOGFILE 2>&1
-  fi
-}
-
-# Extract number of cores to speed up the builds
-# Out: number of CPU cores
-get_core_count () {
-  case $(uname -s) in
-    Linux)
-      grep -c -e '^processor' /proc/cpuinfo
-      ;;
-    Darwin)
-      sysctl -n hw.ncpu
-      ;;
-    CYGWIN*|*_NT-*)
-      echo $NUMBER_OF_PROCESSORS
-      ;;
-    *)
-      echo 1
-      ;;
-  esac
-}
-
-
-# Check for the Android ADB program.
-#
-# On success, return nothing, but updates internal variables so later calls to
-# adb_shell, adb_push, etc.. will work. You can get the path to the ADB program
-# with adb_get_program if needed.
-#
-# On failure, returns 1, and updates the internal adb error message, which can
-# be retrieved with adb_get_error.
-#
-# $1: optional ADB program path.
-# Return: success or failure.
-_ADB=
-_ADB_STATUS=
-_ADB_ERROR=
-
-adb_check () {
-  # First, try to find the executable in the path, or the SDK install dir.
-  _ADB=$1
-  if [ -z "$_ADB" ]; then
-    _ADB=$(which adb 2>/dev/null)
-    if [ -z "$_ADB" -a "$ANDROID_SDK_ROOT" ]; then
-      _ADB=$ANDROID_SDK_ROOT/platform-tools/adb
-      if [ ! -f "$_ADB" ]; then
-        _ADB=
-      fi
-    fi
-    if [ -z "$_ADB" ]; then
-      _ADB_STATUS=1
-      _ADB_ERROR="The Android 'adb' tool is not in your path."
-      return 1
-    fi
-  fi
-
-  log "Found ADB program: $_ADB"
-
-  # Check that it works correctly
-  local ADB_VERSION
-  ADB_VERSION=$("$_ADB" version 2>/dev/null)
-  case $ADB_VERSION in
-    "Android Debug Bridge "*) # Pass
-      log "Found ADB version: $ADB_VERSION"
-      ;;
-    *) # Fail
-      _ADB_ERROR="Your ADB binary reports a bad version ($ADB_VERSION): $_ADB"
-      _ADB_STATUS=1
-      return 1
-  esac
-
-  _ADB_STATUS=0
-  return 0
-}
-
-
-# Return the path to the Android ADB program, if correctly detected.
-# On failure, return the empty string.
-# Out: ADB program path (or empty on failure)
-# Return: success or failure.
-adb_get_program () {
-  # Return cached value as soon as possible.
-  if [ -z "$_ADB_STATUS" ]; then
-    adb_check $1
-  fi
-  echo "$_ADB"
-  return $_ADB_STATUS
-}
-
-# Return the error corresponding to the last ADB function failure.
-adb_get_error () {
-  echo "$_ADB_ERROR"
-}
-
-# Check that there is one device connected through ADB.
-# In case of failure, use adb_get_error to know why this failed.
-# $1: Optional adb program path
-# Return: success or failure.
-_ADB_DEVICE=
-_ADB_DEVICE_STATUS=
-adb_check_device () {
-  if [ "$_ADB_DEVICE_STATUS" ]; then
-    return $_ADB_DEVICE_STATUS
-  fi
-
-  # Check for ADB.
-  if ! adb_check $1; then
-    _ADB_DEVICE_STATUS=$_ADB_STATUS
-    return 1
-  fi
-
-  local ADB_DEVICES NUM_DEVICES FINGERPRINT
-
-  # Count the number of connected devices.
-  ADB_DEVICES=$("$_ADB" devices 2>/dev/null | awk '$2 == "device" { print $1; }')
-  NUM_DEVICES=$(echo "$ADB_DEVICES" | wc -l)
-  case $NUM_DEVICES in
-    0)
-      _ADB_ERROR="No Android device connected. Please connect one to your machine."
-      _ADB_DEVICE_STATUS=1
-      return 1
-      ;;
-    1) # Pass
-      # Ensure the same device will be called in later adb_shell calls.
-      export ANDROID_SERIAL=$ADB_DEVICES
-      ;;
-    *) # 2 or more devices.
-      if [ "$ANDROID_SERIAL" ]; then
-        ADB_DEVICES=$ANDROID_SERIAL
-        NUM_DEVICES=1
-      else
-        _ADB_ERROR="More than one Android device connected. \
-Please define ANDROID_SERIAL in your environment"
-        _ADB_DEVICE_STATUS=1
-        return 1
-      fi
-      ;;
-  esac
-
-  _ADB_DEVICE_STATUS=0
-  _ADB_DEVICE=$ADB_DEVICES
-
-  FINGERPRINT=$(adb_shell getprop ro.build.fingerprint)
-  log "Using ADB device: $ANDROID_SERIAL ($FINGERPRINT)"
-  return 0
-}
-
-# The 'adb shell' command is pretty hopeless, try to make sense of it by:
-#   1/ Removing trailing \r from line endings.
-#   2/ Ensuring the function returns the command's status code.
-#
-# $1+: Command
-# Out: command output (stdout + stderr combined)
-# Return: command exit status
-adb_shell () {
-  local RET ADB_LOG
-  # Check for ADB device.
-  adb_check_device || return 1
-  ADB_LOG=$(mktemp "${TMPDIR:-/tmp}/adb-XXXXXXXX")
-  "$_ADB" shell "$@" ";" echo \$? > "$ADB_LOG" 2>&1
-  sed -i -e 's![[:cntrl:]]!!g' "$ADB_LOG"  # Remove \r.
-  RET=$(sed -e '$!d' "$ADB_LOG")           # Last line contains status code.
-  sed -e '$d' "$ADB_LOG"                   # Print everything except last line.
-  rm -f "$ADB_LOG"
-  return $RET
-}
-
-# Push a file to a device.
-# $1: source file path
-# $2: device target file path
-# Return: success or failure.
-adb_push () {
-  adb_check_device || return 1
-  run "$_ADB" push "$1" "$2"
-}
-
-# Pull a file from a device
-# $1: device file path
-# $2: target host file path
-# Return: success or failure.
-adb_pull () {
-  adb_check_device || return 1
-  run "$_ADB" pull "$1" "$2"
-}
-
-# Same as adb_push, but will panic if the operations didn't succeed.
-adb_install () {
-  adb_push "$@"
-  fail_panic "Failed to install $1 to the Android device at $2"
-}
-
@@ -1,104 +0,0 @@
-# Copyright 2012 Google LLC
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google LLC nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# ndk-build module definition for the Google Breakpad client library
-#
-# To use this file, do the following:
-#
-#   1/ Include this file from your own Android.mk, either directly
-#      or with through the NDK's import-module function.
-#
-#   2/ Use the client static library in your project with:
-#
-#      LOCAL_STATIC_LIBRARIES += breakpad_client
-#
-#   3/ In your source code, include "src/client/linux/exception_handler.h"
-#      and use the Linux instructions to use it.
-#
-# This module works with either the STLport or GNU libstdc++, but you need
-# to select one in your Application.mk
-#
-
-# The top Google Breakpad directory.
-# We assume this Android.mk to be under 'android/google_breakpad'
-
-LOCAL_PATH := $(call my-dir)/../..
-
-# Defube the client library module, as a simple static library that
-# exports the right include path / linker flags to its users.
-
-include $(CLEAR_VARS)
-
-LOCAL_MODULE := breakpad_client
-
-LOCAL_CPP_EXTENSION := .cc
-
-# Breakpad uses inline ARM assembly that requires the library
-# to be built in ARM mode. Otherwise, the build will fail with
-# cryptic assembler messages like:
-#   Compile++ thumb  : google_breakpad_client <= crash_generation_client.cc
-#   /tmp/cc8aMSoD.s: Assembler messages:
-#   /tmp/cc8aMSoD.s:132: Error: invalid immediate: 288 is out of range
-#   /tmp/cc8aMSoD.s:244: Error: invalid immediate: 296 is out of range
-LOCAL_ARM_MODE := arm
-
-# List of client source files, directly taken from Makefile.am
-LOCAL_SRC_FILES := \
-    src/client/linux/crash_generation/crash_generation_client.cc \
-    src/client/linux/dump_writer_common/thread_info.cc \
-    src/client/linux/dump_writer_common/ucontext_reader.cc \
-    src/client/linux/handler/exception_handler.cc \
-    src/client/linux/handler/minidump_descriptor.cc \
-    src/client/linux/log/log.cc \
-    src/client/linux/microdump_writer/microdump_writer.cc \
-    src/client/linux/minidump_writer/linux_dumper.cc \
-    src/client/linux/minidump_writer/linux_ptrace_dumper.cc \
-    src/client/linux/minidump_writer/minidump_writer.cc \
-    src/client/linux/minidump_writer/pe_file.cc \
-    src/client/minidump_file_writer.cc \
-    src/common/convert_UTF.cc \
-    src/common/md5.cc \
-    src/common/string_conversion.cc \
-    src/common/linux/breakpad_getcontext.S \
-    src/common/linux/elfutils.cc \
-    src/common/linux/file_id.cc \
-    src/common/linux/guid_creator.cc \
-    src/common/linux/linux_libc_support.cc \
-    src/common/linux/memory_mapped_file.cc \
-    src/common/linux/safe_readlink.cc
-
-LOCAL_C_INCLUDES        := $(LOCAL_PATH)/src/common/android/include \
-                           $(LOCAL_PATH)/src \
-                           $(LSS_PATH)
-
-LOCAL_EXPORT_C_INCLUDES := $(LOCAL_C_INCLUDES)
-LOCAL_EXPORT_LDLIBS     := -llog
-
-include $(BUILD_STATIC_LIBRARY)
-
-# Done.
@@ -1,554 +0,0 @@
-#!/bin/sh
-# Copyright 2012 Google LLC
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google LLC nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Sanitize the environment
-export LANG=C
-export LC_ALL=C
-
-if [ "$BASH_VERSION" ]; then
-  set -o posix
-fi
-
-PROGDIR=$(dirname "$0")
-PROGDIR=$(cd "$PROGDIR" && pwd)
-PROGNAME=$(basename "$0")
-
-. $PROGDIR/common-functions.sh
-
-DEFAULT_ABI="armeabi"
-VALID_ABIS="armeabi armeabi-v7a x86 mips"
-
-ABI=
-ADB=
-ALL_TESTS=
-ENABLE_M32=
-HELP=
-HELP_ALL=
-NDK_DIR=
-NO_CLEANUP=
-NO_DEVICE=
-NUM_JOBS=$(get_core_count)
-TMPDIR=
-
-for opt do
-  # The following extracts the value if the option is like --name=<value>.
-  optarg=$(expr -- $opt : '^--[^=]*=\(.*\)$')
-  case $opt in
-    --abi=*) ABI=$optarg;;
-    --adb=*) ADB=$optarg;;
-    --all-tests) ALL_TESTS=true;;
-    --enable-m32) ENABLE_M32=true;;
-    --help|-h|-?) HELP=TRUE;;
-    --help-all) HELP_ALL=true;;
-    --jobs=*) NUM_JOBS=$optarg;;
-    --ndk-dir=*) NDK_DIR=$optarg;;
-    --tmp-dir=*) TMPDIR=$optarg;;
-    --no-cleanup) NO_CLEANUP=true;;
-    --no-device) NO_DEVICE=true;;
-    --quiet) decrease_verbosity;;
-    --verbose) increase_verbosity;;
-    -*) panic "Invalid option '$opt', see --help for details.";;
-    *) panic "This script doesn't take any parameters. See --help for details."
-       ;;
-  esac
-done
-
-if [ "$HELP" -o "$HELP_ALL" ]; then
-  echo "\
-  Usage: $PROGNAME [options]
-
-  This script is used to check that your Google Breakpad source tree can
-  be properly built for Android, and that the client library and host tools
-  work properly together.
-"
-  if [ "$HELP_ALL" ]; then
-    echo "\
-  In more details, this script will:
-
-  - Rebuild the host version of Google Breakpad in a temporary
-    directory (with the Auto-tools based build system).
-
-  - Rebuild the Android client library with the Google Breakpad build
-    system (using autotools/configure). This requires that you define
-    ANDROID_NDK_ROOT in your environment to point to a valid Android NDK
-    installation directory, or use the --ndk-dir=<path> option.
-
-  - Rebuild the Android client library and a test crashing program with the
-    Android NDK build system (ndk-build).
-
-  - Require an Android device connected to your machine, and the 'adb'
-    tool in your path. They are used to:
-
-      - Install and  run a test crashing program.
-      - Extract the corresponding minidump from the device.
-      - Dump the symbols from the test program on the host with 'dump_syms'
-      - Generate a stack trace with 'minidump_stackwalk'
-      - Check the stack trace content for valid source file locations.
-
-    You can however skip this requirement and only test the builds by using
-    the --no-device flag.
-
-    By default, all generated files will be created in a temporary directory
-    that is removed when the script completion. If you want to inspect the
-    files, use the --no-cleanup option.
-
-    Finally, use --verbose to increase the verbosity level, this will help
-    you see which exact commands are being issues and their result. Use the
-    flag twice for even more output. Use --quiet to decrease verbosity
-    instead and run the script silently.
-
-    If you have a device connected, the script will probe it to determine
-    its primary CPU ABI, and build the test program for it. You can however
-    use the --abi=<name> option to override this (this can be useful to check
-    the secondary ABI, e.g. using --abi=armeabi to check that such a program
-    works correctly on an ARMv7-A device).
-
-    If you don't have a device connected, the test program will be built (but
-    not run) with the default '$DEFAULT_ABI' ABI. Again, you can use
-    --abi=<name> to override this. Valid ABI names are:
-
-        $VALID_ABIS
-
-    The script will only run the client library unit test on the device
-    by default. You can use --all-tests to also build and run the unit
-    tests for the Breakpad tools and processor, but be warned that this
-    adds several minutes of testing time. --all-tests will also run the
-    host unit tests suite.
-"
-
-  fi  # HELP_ALL
-
-  echo "\
-  Valid options:
-
-      --help|-h|-?     Display this message.
-      --help-all       Display extended help.
-      --enable-m32     Build 32-bit version of host tools.
-      --abi=<name>     Specify target CPU ABI [auto-detected].
-      --jobs=<count>   Run <count> build tasks in parallel [$NUM_JOBS].
-      --ndk-dir=<path> Specify NDK installation directory.
-      --tmp-dir=<path> Specify temporary directory (will be wiped-out).
-      --adb=<path>     Specify adb program path.
-      --no-cleanup     Don't remove temporary directory after completion.
-      --no-device      Do not try to detect devices, nor run crash test.
-      --all-tests      Run all unit tests (i.e. tools and processor ones too).
-      --verbose        Increase verbosity.
-      --quiet          Decrease verbosity."
-
-  exit 0
-fi
-
-TESTAPP_DIR=$PROGDIR/sample_app
-
-# Select NDK install directory.
-if [ -z "$NDK_DIR" ]; then
-  if [ -z "$ANDROID_NDK_ROOT" ]; then
-    panic "Please define ANDROID_NDK_ROOT in your environment, or use \
--ndk-dir=<path>."
-  fi
-  NDK_DIR="$ANDROID_NDK_ROOT"
-  log "Found NDK directory: $NDK_DIR"
-else
-  log "Using NDK directory: $NDK_DIR"
-fi
-# Small sanity check.
-NDK_BUILD="$NDK_DIR/ndk-build"
-if [ ! -f "$NDK_BUILD" ]; then
-  panic "Your NDK directory is not valid (missing ndk-build): $NDK_DIR"
-fi
-
-# Ensure the temporary directory is deleted on exit, except if the --no-cleanup
-# option is used.
-
-clean_tmpdir () {
-  if [ "$TMPDIR" ]; then
-    if [ -z "$NO_CLEANUP" ]; then
-      log "Cleaning up: $TMPDIR"
-      rm -rf "$TMPDIR"
-    else
-      dump "Temporary directory contents preserved: $TMPDIR"
-    fi
-  fi
-  exit "$@"
-}
-
-atexit clean_tmpdir
-
-# If --tmp-dir=<path> is not used, create a temporary directory.
-# Otherwise, start by cleaning up the user-provided path.
-if [ -z "$TMPDIR" ]; then
-  TMPDIR=$(mktemp -d /tmp/$PROGNAME.XXXXXXXX)
-  fail_panic "Can't create temporary directory!"
-  log "Using temporary directory: $TMPDIR"
-else
-  if [ ! -d "$TMPDIR" ]; then
-    mkdir -p "$TMPDIR"
-    fail_panic "Can't create temporary directory: $TMPDIR"
-  else
-    log "Cleaning up temporary directory: $TMPDIR"
-    rm -rf "$TMPDIR"/*
-    fail_panic "Cannot cleanup temporary directory!"
-  fi
-fi
-
-if [ -z "$NO_DEVICE" ]; then
-  if ! adb_check_device $ADB; then
-    echo "$(adb_get_error)"
-    echo "Use --no-device to build the code without running any tests."
-    exit 1
-  fi
-fi
-
-BUILD_LOG="$TMPDIR/build.log"
-RUN_LOG="$TMPDIR/run.log"
-CRASH_LOG="$TMPDIR/crash.log"
-
-set_run_log "$RUN_LOG"
-
-TMPHOST="$TMPDIR/host-local"
-
-cd "$TMPDIR"
-
-# Build host version of the tools
-dump "Building host binaries."
-CONFIGURE_FLAGS=
-if [ "$ENABLE_M32" ]; then
-  CONFIGURE_FLAGS="$CONFIGURE_FLAGS --enable-m32"
-fi
-(
-  run mkdir "$TMPDIR/build-host" &&
-  run cd "$TMPDIR/build-host" &&
-  run2 "$PROGDIR/../configure" --prefix="$TMPHOST" $CONFIGURE_FLAGS &&
-  run2 make -j$NUM_JOBS install
-)
-fail_panic "Can't build host binaries!"
-
-if [ "$ALL_TESTS" ]; then
-  dump "Running host unit tests."
-  (
-    run cd "$TMPDIR/build-host" &&
-    run2 make -j$NUM_JOBS check
-  )
-  fail_panic "Host unit tests failed!!"
-fi
-
-TMPBIN=$TMPHOST/bin
-
-# Generate a stand-alone NDK toolchain
-
-# Extract CPU ABI and architecture from device, if any.
-if adb_check_device; then
-  DEVICE_ABI=$(adb_shell getprop ro.product.cpu.abi)
-  DEVICE_ABI2=$(adb_shell getprop ro.product.cpu.abi2)
-  if [ -z "$DEVICE_ABI" ]; then
-    panic "Can't extract ABI from connected device!"
-  fi
-  if [ "$DEVICE_ABI2" ]; then
-    dump "Found device ABIs: $DEVICE_ABI $DEVICE_ABI2"
-  else
-    dump "Found device ABI: $DEVICE_ABI"
-    DEVICE_ABI2=$DEVICE_ABI
-  fi
-
-  # If --abi=<name> is used, check that the device supports it.
-  if [ "$ABI" -a "$DEVICE_ABI" != "$ABI" -a "$DEVICE_ABI2" != "$ABI" ]; then
-    dump  "ERROR: Device ABI(s) do not match --abi command-line value ($ABI)!"
-    panic "Please use --no-device to skip device tests."
-  fi
-
-  if [ -z "$ABI" ]; then
-    ABI=$DEVICE_ABI
-    dump "Using CPU ABI: $ABI (device)"
-  else
-    dump "Using CPU ABI: $ABI (command-line)"
-  fi
-else
-  if [ -z "$ABI" ]; then
-    # No device connected, choose default ABI
-    ABI=$DEFAULT_ABI
-    dump "Using CPU ABI: $ABI (default)"
-  else
-    dump "Using CPU ABI: $ABI (command-line)"
-  fi
-fi
-
-# Check the ABI value
-VALID=
-for VALID_ABI in $VALID_ABIS; do
-  if [ "$ABI" = "$VALID_ABI" ]; then
-    VALID=true
-    break
-  fi
-done
-
-if [ -z "$VALID" ]; then
-  panic "Unknown CPU ABI '$ABI'. Valid values are: $VALID_ABIS"
-fi
-
-# Extract architecture name from ABI
-case $ABI in
-  armeabi*) ARCH=arm;;
-  *) ARCH=$ABI;;
-esac
-
-# Extract GNU configuration name
-case $ARCH in
-  arm)
-    GNU_CONFIG=arm-linux-androideabi
-    ;;
-  x86)
-    GNU_CONFIG=i686-linux-android
-    ;;
-  mips)
-    GNU_CONFIG=mipsel-linux-android
-    ;;
-  *)
-    GNU_CONFIG="$ARCH-linux-android"
-    ;;
-esac
-
-# Generate standalone NDK toolchain installation
-NDK_STANDALONE="$TMPDIR/ndk-$ARCH-toolchain"
-echo "Generating NDK standalone toolchain installation"
-mkdir -p "$NDK_STANDALONE"
-# NOTE: The --platform=android-9 is required to provide <regex.h> for GTest.
-run "$NDK_DIR/build/tools/make-standalone-toolchain.sh" \
-      --arch="$ARCH" \
-      --platform=android-9 \
-      --install-dir="$NDK_STANDALONE"
-fail_panic "Can't generate standalone NDK toolchain installation!"
-
-# Rebuild the client library, processor and tools with the auto-tools based
-# build system. Even though it's not going to be used, this checks that this
-# still works correctly.
-echo "Building full Android binaries with configure/make"
-TMPTARGET="$TMPDIR/target-local"
-(
-  PATH="$NDK_STANDALONE/bin:$PATH"
-  run mkdir "$TMPTARGET" &&
-  run mkdir "$TMPDIR"/build-target &&
-  run cd "$TMPDIR"/build-target &&
-  run2 "$PROGDIR"/../configure --prefix="$TMPTARGET" \
-                               --host="$GNU_CONFIG" &&
-  run2 make -j$NUM_JOBS install
-)
-fail_panic "Could not rebuild Android binaries!"
-
-# Build and/or run unit test suite.
-# If --no-device is used, only rebuild it, otherwise, run in on the
-# connected device.
-if [ "$NO_DEVICE" ]; then
-  ACTION="Building"
-  # This is a trick to force the Makefile to ignore running the scripts.
-  TESTS_ENVIRONMENT="TESTS_ENVIRONMENT=true"
-else
-  ACTION="Running"
-  TESTS_ENVIRONMENT=
-fi
-
-(
-  PATH="$NDK_STANDALONE/bin:$PATH"
-  run cd "$TMPDIR"/build-target &&
-  # Reconfigure to only run the client unit test suite.
-  # This one should _never_ fail.
-  dump "$ACTION Android client library unit tests."
-  run2 "$PROGDIR"/../configure --prefix="$TMPTARGET" \
-                               --host="$GNU_CONFIG" \
-                               --disable-tools \
-                               --disable-processor &&
-  run make -j$NUM_JOBS check $TESTS_ENVIRONMENT || exit $?
-
-  if [ "$ALL_TESTS" ]; then
-    dump "$ACTION Tools and processor unit tests."
-    # Reconfigure to run the processor and tools tests.
-    # Most of these fail for now, so do not worry about it.
-    run2 "$PROGDIR"/../configure --prefix="$TMPTARGET" \
-                                 --host="$GNU_CONFIG" &&
-    run make -j$NUM_JOBS check $TESTS_ENVIRONMENT
-    if [ $? != 0 ]; then
-      dump "Tools and processor unit tests failed as expected. \
-Use --verbose for results."
-    fi                           
-  fi
-)
-fail_panic "Client library unit test suite failed!"
-
-# Copy sources to temporary directory
-PROJECT_DIR=$TMPDIR/project
-dump "Copying test program sources to: $PROJECT_DIR"
-run cp -r "$TESTAPP_DIR" "$PROJECT_DIR" &&
-run rm -rf "$PROJECT_DIR/obj" &&
-run rm -rf "$PROJECT_DIR/libs"
-fail_panic "Could not copy test program sources to: $PROJECT_DIR"
-
-# Build the test program with ndk-build.
-dump "Building test program with ndk-build"
-export NDK_MODULE_PATH="$PROGDIR"
-NDK_BUILD_FLAGS="-j$NUM_JOBS"
-if verbosity_is_higher_than 1; then
-  NDK_BUILD_FLAGS="$NDK_BUILD_FLAGS NDK_LOG=1 V=1"
-fi
-run "$NDK_DIR/ndk-build" -C "$PROJECT_DIR" $NDK_BUILD_FLAGS APP_ABI=$ABI
-fail_panic "Can't build test program!"
-
-# Unless --no-device was used, stop right here if ADB isn't in the path,
-# or there is no connected device.
-if [ "$NO_DEVICE" ]; then
-  dump "Done. Please connect a device to run all tests!"
-  clean_exit 0
-fi
-
-# Push the program to the device.
-TESTAPP=test_google_breakpad
-TESTAPP_FILE="$PROJECT_DIR/libs/$ABI/test_google_breakpad"
-if [ ! -f "$TESTAPP_FILE" ]; then
-  panic "Device requires '$ABI' binaries. None found!"
-fi
-
-# Run the program there
-dump "Installing test program on device"
-DEVICE_TMP=/data/local/tmp
-adb_push "$TESTAPP_FILE" "$DEVICE_TMP/"
-fail_panic "Cannot push test program to device!"
-
-dump "Running test program on device"
-adb_shell cd "$DEVICE_TMP" "&&" ./$TESTAPP > "$CRASH_LOG" 2>/dev/null
-if [ $? = 0 ]; then
-  panic "Test program did *not* crash as expected!"
-fi
-if verbosity_is_higher_than 0; then
-  echo -n "Crash log: "
-  cat "$CRASH_LOG"
-fi
-
-# Extract minidump from device
-MINIDUMP_NAME=$(awk '$1 == "Dump" && $2 == "path:" { print $3; }' "$CRASH_LOG")
-MINIDUMP_NAME=$(basename "$MINIDUMP_NAME")
-if [ -z "$MINIDUMP_NAME" ]; then
-  panic "Test program didn't write minidump properly!"
-fi
-
-dump "Extracting minidump: $MINIDUMP_NAME"
-adb_pull "$DEVICE_TMP/$MINIDUMP_NAME" .
-fail_panic "Can't extract minidump!"
-
-dump "Parsing test program symbols"
-if verbosity_is_higher_than 1; then
-  log "COMMAND: $TMPBIN/dump_syms \
-                $PROJECT_DIR/obj/local/$ABI/$TESTAPP >$TESTAPP.sym"
-fi
-"$TMPBIN/dump_syms" "$PROJECT_DIR/obj/local/$ABI/$TESTAPP" > $TESTAPP.sym
-fail_panic "dump_syms doesn't work!"
-
-VERSION=$(awk '$1 == "MODULE" { print $4; }' $TESTAPP.sym)
-dump "Found module version: $VERSION"
-if [ -z "$VERSION" ]; then
-  echo "ERROR: Can't find proper module version from symbol dump!"
-  head -n5 $TESTAPP.sym
-  clean_exit 1
-fi
-
-run mkdir -p "$TMPDIR/symbols/$TESTAPP/$VERSION"
-run mv $TESTAPP.sym "$TMPDIR/symbols/$TESTAPP/$VERSION/"
-
-dump "Generating stack trace"
-# Don't use 'run' to be able to send stdout and stderr to two different files.
-log "COMMAND: $TMPBIN/minidump_stackwalk $MINIDUMP_NAME symbols"
-"$TMPBIN/minidump_stackwalk" $MINIDUMP_NAME \
-                             "$TMPDIR/symbols" \
-                             > "$BUILD_LOG" 2>>"$RUN_LOG"
-fail_panic "minidump_stackwalk doesn't work!"
-
-dump "Checking stack trace content"
-
-if verbosity_is_higher_than 1; then
-  cat "$BUILD_LOG"
-fi
-
-# The generated stack trace should look like the following:
-#
-# Thread 0 (crashed)
-#  0  test_google_breakpad!crash [test_breakpad.cpp : 17 + 0x4]
-#      r4 = 0x00015530    r5 = 0xbea2cbe4    r6 = 0xffffff38    r7 = 0xbea2cb5c
-#      r8 = 0x00000000    r9 = 0x00000000   r10 = 0x00000000    fp = 0x00000000
-#      sp = 0xbea2cb50    lr = 0x00009025    pc = 0x00008f84
-#     Found by: given as instruction pointer in context
-#  1  test_google_breakpad!main [test_breakpad.cpp : 25 + 0x3]
-#      r4 = 0x00015530    r5 = 0xbea2cbe4    r6 = 0xffffff38    r7 = 0xbea2cb5c
-#      r8 = 0x00000000    r9 = 0x00000000   r10 = 0x00000000    fp = 0x00000000
-#      sp = 0xbea2cb50    pc = 0x00009025
-#     Found by: call frame info
-#  2  libc.so + 0x164e5
-#      r4 = 0x00008f64    r5 = 0xbea2cc34    r6 = 0x00000001    r7 = 0xbea2cc3c
-#      r8 = 0x00000000    r9 = 0x00000000   r10 = 0x00000000    fp = 0x00000000
-#      sp = 0xbea2cc18    pc = 0x400c34e7
-#     Found by: call frame info
-# ...
-#
-# The most important part for us is ensuring that the source location could
-# be extracted, so look at the 'test_breakpad.cpp' references here.
-#
-# First, extract all the lines with test_google_breakpad! in them, and
-# dump the corresponding crash location.
-#
-# Note that if the source location can't be extracted, the second field
-# will only be 'test_google_breakpad' without the exclamation mark.
-#
-LOCATIONS=$(awk '$2 ~ "^test_google_breakpad!.*" { print $3; }' "$BUILD_LOG")
-
-if [ -z "$LOCATIONS" ]; then
-  if verbosity_is_lower_than 1; then
-    cat "$BUILD_LOG"
-  fi
-  panic "No source location found in stack trace!"
-fi
-
-# Now check that they all match "[<source file>"
-BAD_LOCATIONS=
-for LOCATION in $LOCATIONS; do
-  case $LOCATION in
-    # Escape the opening bracket, or some shells like Dash will not
-    # match them properly.
-    \[*.cpp|\[*.cc|\[*.h) # These are valid source locations in our executable
-      ;;
-    *) # Everything else is not!
-      BAD_LOCATIONS="$BAD_LOCATIONS $LOCATION"
-      ;;
-  esac
-done
-
-if [ "$BAD_LOCATIONS" ]; then
-  dump "ERROR: Generated stack trace doesn't contain valid source locations:"
-  cat "$BUILD_LOG"
-  echo "Bad locations are: $BAD_LOCATIONS"
-  exit 1
-fi
-
-echo "All clear! Congratulations."
-
@@ -1,32 +0,0 @@
-This is a sample Android executable that can be used to test the
-Google Breakpad client library on Android.
-
-Its purpose is simply to crash and generate a minidump under /data/local/tmp.
-
-Build instructions:
-
-   cd android/sample_app
-   $NDK/ndk-build
-
-  Where $NDK points to a valid Android NDK installation.
-
-Usage instructions:
-
-   After buildind the test program, send it to a device, then run it as
-   the shell UID:
-
-     adb push libs/armeabi/test_google_breakpad /data/local/tmp
-     adb shell /data/local/tmp/test_google_breakpad
-
-   This will simply crash after dumping the name of the generated minidump
-   file.
-
-   See jni/test_breakpad.cpp for details.
-
-   Use 'armeabi-v7a' instead of 'armeabi' above to test the ARMv7-A version
-   of the binary.
-
-Note:
-   If you plan to use the library in a regular Android application, store
-   the minidump files either to your app-specific directory, or to the SDCard
-   (the latter requiring a specific permission).
@@ -1,43 +0,0 @@
-# Copyright 2012 Google LLC
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google LLC nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-LOCAL_PATH := $(call my-dir)
-
-include $(CLEAR_VARS)
-LOCAL_MODULE := test_google_breakpad
-LOCAL_SRC_FILES := test_breakpad.cpp
-LOCAL_STATIC_LIBRARIES += breakpad_client
-include $(BUILD_EXECUTABLE)
-
-# If NDK_MODULE_PATH is defined, import the module, otherwise do a direct
-# includes. This allows us to build in all scenarios easily.
-ifneq ($(NDK_MODULE_PATH),)
-  $(call import-module,google_breakpad)
-else
-  include $(LOCAL_PATH)/../../google_breakpad/Android.mk
-endif
@@ -1,31 +0,0 @@
-# Copyright 2012 Google LLC
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google LLC nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-APP_STL := stlport_static
-APP_ABI := all
-APP_CXXFLAGS := -std=c++11 -D__STDC_LIMIT_MACROS
@@ -1,56 +0,0 @@
-// Copyright 2012 Google LLC
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google LLC nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-#include <stdio.h>
-
-#include "client/linux/handler/exception_handler.h"
-#include "client/linux/handler/minidump_descriptor.h"
-
-namespace {
-
-bool DumpCallback(const google_breakpad::MinidumpDescriptor& descriptor,
-                  void* context,
-                  bool succeeded) {
-  printf("Dump path: %s\n", descriptor.path());
-  return succeeded;
-}
-
-void Crash() {
-  volatile int* a = reinterpret_cast<volatile int*>(NULL);
-  *a = 1;
-}
-
-}  // namespace
-
-int main(int argc, char* argv[]) {
-  google_breakpad::MinidumpDescriptor descriptor(".");
-  google_breakpad::ExceptionHandler eh(descriptor, NULL, DumpCallback,
-                                       NULL, true, -1);
-  Crash();
-  return 0;
-}
@@ -1,131 +0,0 @@
-#! /bin/sh
-# test-driver - basic testsuite driver script.
-
-# Slightly modified for Android, see ANDROID comment below.
-
-scriptversion=2012-06-27.10; # UTC
-
-# Copyright (C) 2011-2013 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-# Make unconditional expansion of undefined variables an error.  This
-# helps a lot in preventing typo-related bugs.
-set -u
-
-usage_error ()
-{
-  echo "$0: $*" >&2
-  print_usage >&2
-  exit 2
-}
-
-print_usage ()
-{
-  cat <<END
-Usage:
-  test-driver --test-name=NAME --log-file=PATH --trs-file=PATH
-              [--expect-failure={yes|no}] [--color-tests={yes|no}]
-              [--enable-hard-errors={yes|no}] [--] TEST-SCRIPT
-The '--test-name', '--log-file' and '--trs-file' options are mandatory.
-END
-}
-
-# TODO: better error handling in option parsing (in particular, ensure
-# TODO: $log_file, $trs_file and $test_name are defined).
-test_name= # Used for reporting.
-log_file=  # Where to save the output of the test script.
-trs_file=  # Where to save the metadata of the test run.
-expect_failure=no
-color_tests=no
-enable_hard_errors=yes
-while test $# -gt 0; do
-  case $1 in
-  --help) print_usage; exit $?;;
-  --version) echo "test-driver $scriptversion"; exit $?;;
-  --test-name) test_name=$2; shift;;
-  --log-file) log_file=$2; shift;;
-  --trs-file) trs_file=$2; shift;;
-  --color-tests) color_tests=$2; shift;;
-  --expect-failure) expect_failure=$2; shift;;
-  --enable-hard-errors) enable_hard_errors=$2; shift;;
-  --) shift; break;;
-  -*) usage_error "invalid option: '$1'";;
-  esac
-  shift
-done
-
-if test $color_tests = yes; then
-  # Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'.
-  red='[0;31m' # Red.
-  grn='[0;32m' # Green.
-  lgn='[1;32m' # Light green.
-  blu='[1;34m' # Blue.
-  mgn='[0;35m' # Magenta.
-  std='[m'     # No color.
-else
-  red= grn= lgn= blu= mgn= std=
-fi
-
-do_exit='rm -f $log_file $trs_file; (exit $st); exit $st'
-trap "st=129; $do_exit" 1
-trap "st=130; $do_exit" 2
-trap "st=141; $do_exit" 13
-trap "st=143; $do_exit" 15
-
-# Test script is run here.
-# ANDROID: old line was: "$@" > $log_file 2>&1
-progdir=$(dirname "$0")
-"$progdir/test-shell.sh" "$@" > $log_file 2>&1
-estatus=$?
-if test $enable_hard_errors = no && test $estatus -eq 99; then
-  estatus=1
-fi
-
-case $estatus:$expect_failure in
-  0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
-  0:*)   col=$grn res=PASS  recheck=no  gcopy=no;;
-  77:*)  col=$blu res=SKIP  recheck=no  gcopy=yes;;
-  99:*)  col=$mgn res=ERROR recheck=yes gcopy=yes;;
-  *:yes) col=$lgn res=XFAIL recheck=no  gcopy=yes;;
-  *:*)   col=$red res=FAIL  recheck=yes gcopy=yes;;
-esac
-
-# Report outcome to console.
-echo "${col}${res}${std}: $test_name"
-
-# Register the test result, and other relevant metadata.
-echo ":test-result: $res" > $trs_file
-echo ":global-test-result: $res" >> $trs_file
-echo ":recheck: $recheck" >> $trs_file
-echo ":copy-in-global-log: $gcopy" >> $trs_file
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
@@ -1,130 +0,0 @@
-#!/bin/sh
-#
-# Copyright 2012 Google LLC
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-#     * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following disclaimer
-# in the documentation and/or other materials provided with the
-# distribution.
-#     * Neither the name of Google LLC nor the names of its
-# contributors may be used to endorse or promote products derived from
-# this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# A special shell wrapper that can be used to run the Google Breakpad unit
-# tests on a connected Android device.
-#
-# This is designed to be called from the Makefile during 'make check'
-#
-
-PROGDIR=$(dirname "$0")
-PROGNAME=$(basename "$0")
-. $PROGDIR/common-functions.sh
-
-# Extract test program name first.
-TEST_PROGRAM=$1
-shift
-
-if [ -z "$TEST_PROGRAM" ]; then
-  panic "No test program/script name on the command-line!"
-fi
-
-if [ ! -f "$TEST_PROGRAM" ]; then
-  panic "Can't find test program/script: $TEST_PROGRAM"
-fi
-
-# Create test directory on the device
-TEST_DIR=/data/local/tmp/test-google-breakpad-$$
-adb_shell mkdir "$TEST_DIR" ||
-    panic "Can't create test directory on device: $TEST_DIR"
-
-# Ensure that it is always removed when the script exits.
-clean_test_dir () {
-  # Don't care about success/failure, use '$ADB shell' directly.
-  adb_shell rm -r "$TEST_DIR"
-}
-
-atexit clean_test_dir
-
-TEST_PROGRAM_NAME=$(basename "$TEST_PROGRAM")
-TEST_PROGRAM_DIR=$(dirname "$TEST_PROGRAM")
-
-# Handle special case(s) here.
-DATA_FILES=
-case $TEST_PROGRAM_NAME in
-  linux_client_unittest)
-    # linux_client_unittest will call another executable at runtime, ensure
-    # it is installed too.
-    adb_install "$TEST_PROGRAM_DIR/linux_dumper_unittest_helper" "$TEST_DIR"
-    # linux_client_unittest loads a shared library at runtime, ensure it is
-    # installed too.
-    adb_install "$TEST_PROGRAM_DIR/linux_client_unittest_shlib" "$TEST_DIR"
-    ;;
-  basic_source_line_resolver_unittest)
-    DATA_FILES="module1.out \
-                module2.out \
-                module3_bad.out \
-                module4_bad.out"
-    ;;
-  exploitability_unittest)
-    DATA_FILES="scii_read_av.dmp \
-                ascii_read_av_block_write.dmp \
-                ascii_read_av_clobber_write.dmp \
-                ascii_read_av_conditional.dmp \
-                ascii_read_av_non_null.dmp \
-                ascii_read_av_then_jmp.dmp \
-                ascii_read_av_xchg_write.dmp \
-                ascii_write_av.dmp \
-                ascii_write_av_arg_to_call.dmp \
-                exec_av_on_stack.dmp \
-                null_read_av.dmp \
-                null_write_av.dmp \
-                read_av.dmp \
-                null_read_av.dmp \
-                write_av_non_null.dmp"
-    ;;
-  fast_source_line_resolver_unittest)
-    DATA_FILES="module0.out \
-                module1.out \
-                module2.out \
-                module3_bad.out \
-                module4_bad.out"
-    ;;
-  minidump_processor_unittest|minidump_unittest)
-    DATA_FILES="src/processor/testdata/minidump2.dmp"
-    ;;
-esac
-
-# Install the data files, their path is relative to the environment
-# variable 'srcdir'
-for FILE in $DATA_FILES; do
-  FILEDIR=src/processor/testdata/$(dirname "$FILE")
-  adb_shell mkdir -p "$TEST_DIR/$FILEDIR"
-  adb_install "${srcdir:-.}/$FILE" "$TEST_DIR"/"$FILE"
-done
-
-# Copy test program to device
-adb_install "$TEST_PROGRAM" "$TEST_DIR"
-
-# Run it
-adb_shell "cd $TEST_DIR && LD_LIBRARY_PATH=. ./$TEST_PROGRAM_NAME $@"
-
-# Note: exiting here will call cleanup_exit which will remove the temporary
-#       files from the device.
@@ -1,42 +0,0 @@
-version: '{build}'
-
-environment:
-  GYP_MSVS_VERSION: 2013
-
-platform:
-  - Win32
-
-configuration:
-  - Debug
-  - Release
-
-# Use the source dir expected by gclient.
-clone_folder: c:\projects\breakpad\src
-
-# Before checkout.
-init:
-  - cd %APPVEYOR_BUILD_FOLDER%\..\..
-  - appveyor DownloadFile https://storage.googleapis.com/chrome-infra/depot_tools.zip
-  - 7z -bd x depot_tools.zip -odepot_tools
-  - depot_tools\update_depot_tools
-  - cd %APPVEYOR_BUILD_FOLDER%
-
-# After checkout.
-install:
-  - PATH C:\projects\depot_tools;%PATH%
-  - cd %APPVEYOR_BUILD_FOLDER%\..
-  - gclient config https://%APPVEYOR_REPO_PROVIDER%.com/%APPVEYOR_REPO_NAME% --unmanaged --name=src
-  - gclient sync
-
-build_script:
-  - cd %APPVEYOR_BUILD_FOLDER%
-  - msbuild src\client\windows\breakpad_client.sln /logger:"C:\Program Files\AppVeyor\BuildAgent\Appveyor.MSBuildLogger.dll" /m /verbosity:normal
-  - msbuild src\tools\windows\tools_windows.sln    /logger:"C:\Program Files\AppVeyor\BuildAgent\Appveyor.MSBuildLogger.dll" /m /verbosity:normal
-
-test_script:
-  - src\client\windows\%CONFIGURATION%\client_tests.exe
-  - src\tools\windows\%CONFIGURATION%\dump_syms_unittest.exe
-
-artifacts:
-  - path: '**\*.exe'
-  - path: '**\*.lib'
@@ -1,271 +0,0 @@
-#! /bin/sh
-# Wrapper for Microsoft lib.exe
-
-me=ar-lib
-scriptversion=2019-07-04.01; # UTC
-
-# Copyright (C) 2010-2021 Free Software Foundation, Inc.
-# Written by Peter Rosin <peda@lysator.liu.se>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-
-# func_error message
-func_error ()
-{
-  echo "$me: $1" 1>&2
-  exit 1
-}
-
-file_conv=
-
-# func_file_conv build_file
-# Convert a $build file to $host form and store it in $file
-# Currently only supports Windows hosts.
-func_file_conv ()
-{
-  file=$1
-  case $file in
-    / | /[!/]*) # absolute file, and not a UNC file
-      if test -z "$file_conv"; then
-	# lazily determine how to convert abs files
-	case `uname -s` in
-	  MINGW*)
-	    file_conv=mingw
-	    ;;
-	  CYGWIN* | MSYS*)
-	    file_conv=cygwin
-	    ;;
-	  *)
-	    file_conv=wine
-	    ;;
-	esac
-      fi
-      case $file_conv in
-	mingw)
-	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
-	  ;;
-	cygwin | msys)
-	  file=`cygpath -m "$file" || echo "$file"`
-	  ;;
-	wine)
-	  file=`winepath -w "$file" || echo "$file"`
-	  ;;
-      esac
-      ;;
-  esac
-}
-
-# func_at_file at_file operation archive
-# Iterate over all members in AT_FILE performing OPERATION on ARCHIVE
-# for each of them.
-# When interpreting the content of the @FILE, do NOT use func_file_conv,
-# since the user would need to supply preconverted file names to
-# binutils ar, at least for MinGW.
-func_at_file ()
-{
-  operation=$2
-  archive=$3
-  at_file_contents=`cat "$1"`
-  eval set x "$at_file_contents"
-  shift
-
-  for member
-  do
-    $AR -NOLOGO $operation:"$member" "$archive" || exit $?
-  done
-}
-
-case $1 in
-  '')
-     func_error "no command.  Try '$0 --help' for more information."
-     ;;
-  -h | --h*)
-    cat <<EOF
-Usage: $me [--help] [--version] PROGRAM ACTION ARCHIVE [MEMBER...]
-
-Members may be specified in a file named with @FILE.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "$me, version $scriptversion"
-    exit $?
-    ;;
-esac
-
-if test $# -lt 3; then
-  func_error "you must specify a program, an action and an archive"
-fi
-
-AR=$1
-shift
-while :
-do
-  if test $# -lt 2; then
-    func_error "you must specify a program, an action and an archive"
-  fi
-  case $1 in
-    -lib | -LIB \
-    | -ltcg | -LTCG \
-    | -machine* | -MACHINE* \
-    | -subsystem* | -SUBSYSTEM* \
-    | -verbose | -VERBOSE \
-    | -wx* | -WX* )
-      AR="$AR $1"
-      shift
-      ;;
-    *)
-      action=$1
-      shift
-      break
-      ;;
-  esac
-done
-orig_archive=$1
-shift
-func_file_conv "$orig_archive"
-archive=$file
-
-# strip leading dash in $action
-action=${action#-}
-
-delete=
-extract=
-list=
-quick=
-replace=
-index=
-create=
-
-while test -n "$action"
-do
-  case $action in
-    d*) delete=yes  ;;
-    x*) extract=yes ;;
-    t*) list=yes    ;;
-    q*) quick=yes   ;;
-    r*) replace=yes ;;
-    s*) index=yes   ;;
-    S*)             ;; # the index is always updated implicitly
-    c*) create=yes  ;;
-    u*)             ;; # TODO: don't ignore the update modifier
-    v*)             ;; # TODO: don't ignore the verbose modifier
-    *)
-      func_error "unknown action specified"
-      ;;
-  esac
-  action=${action#?}
-done
-
-case $delete$extract$list$quick$replace,$index in
-  yes,* | ,yes)
-    ;;
-  yesyes*)
-    func_error "more than one action specified"
-    ;;
-  *)
-    func_error "no action specified"
-    ;;
-esac
-
-if test -n "$delete"; then
-  if test ! -f "$orig_archive"; then
-    func_error "archive not found"
-  fi
-  for member
-  do
-    case $1 in
-      @*)
-        func_at_file "${1#@}" -REMOVE "$archive"
-        ;;
-      *)
-        func_file_conv "$1"
-        $AR -NOLOGO -REMOVE:"$file" "$archive" || exit $?
-        ;;
-    esac
-  done
-
-elif test -n "$extract"; then
-  if test ! -f "$orig_archive"; then
-    func_error "archive not found"
-  fi
-  if test $# -gt 0; then
-    for member
-    do
-      case $1 in
-        @*)
-          func_at_file "${1#@}" -EXTRACT "$archive"
-          ;;
-        *)
-          func_file_conv "$1"
-          $AR -NOLOGO -EXTRACT:"$file" "$archive" || exit $?
-          ;;
-      esac
-    done
-  else
-    $AR -NOLOGO -LIST "$archive" | tr -d '\r' | sed -e 's/\\/\\\\/g' \
-      | while read member
-        do
-          $AR -NOLOGO -EXTRACT:"$member" "$archive" || exit $?
-        done
-  fi
-
-elif test -n "$quick$replace"; then
-  if test ! -f "$orig_archive"; then
-    if test -z "$create"; then
-      echo "$me: creating $orig_archive"
-    fi
-    orig_archive=
-  else
-    orig_archive=$archive
-  fi
-
-  for member
-  do
-    case $1 in
-    @*)
-      func_file_conv "${1#@}"
-      set x "$@" "@$file"
-      ;;
-    *)
-      func_file_conv "$1"
-      set x "$@" "$file"
-      ;;
-    esac
-    shift
-    shift
-  done
-
-  if test -n "$orig_archive"; then
-    $AR -NOLOGO -OUT:"$archive" "$orig_archive" "$@" || exit $?
-  else
-    $AR -NOLOGO -OUT:"$archive" "$@" || exit $?
-  fi
-
-elif test -n "$list"; then
-  if test ! -f "$orig_archive"; then
-    func_error "archive not found"
-  fi
-  $AR -NOLOGO -LIST "$archive" || exit $?
-fi
@@ -1,348 +0,0 @@
-#! /bin/sh
-# Wrapper for compilers which do not understand '-c -o'.
-
-scriptversion=2018-03-07.03; # UTC
-
-# Copyright (C) 1999-2021 Free Software Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-nl='
-'
-
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent tools from complaining about whitespace usage.
-IFS=" ""	$nl"
-
-file_conv=
-
-# func_file_conv build_file lazy
-# Convert a $build file to $host form and store it in $file
-# Currently only supports Windows hosts. If the determined conversion
-# type is listed in (the comma separated) LAZY, no conversion will
-# take place.
-func_file_conv ()
-{
-  file=$1
-  case $file in
-    / | /[!/]*) # absolute file, and not a UNC file
-      if test -z "$file_conv"; then
-	# lazily determine how to convert abs files
-	case `uname -s` in
-	  MINGW*)
-	    file_conv=mingw
-	    ;;
-	  CYGWIN* | MSYS*)
-	    file_conv=cygwin
-	    ;;
-	  *)
-	    file_conv=wine
-	    ;;
-	esac
-      fi
-      case $file_conv/,$2, in
-	*,$file_conv,*)
-	  ;;
-	mingw/*)
-	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
-	  ;;
-	cygwin/* | msys/*)
-	  file=`cygpath -m "$file" || echo "$file"`
-	  ;;
-	wine/*)
-	  file=`winepath -w "$file" || echo "$file"`
-	  ;;
-      esac
-      ;;
-  esac
-}
-
-# func_cl_dashL linkdir
-# Make cl look for libraries in LINKDIR
-func_cl_dashL ()
-{
-  func_file_conv "$1"
-  if test -z "$lib_path"; then
-    lib_path=$file
-  else
-    lib_path="$lib_path;$file"
-  fi
-  linker_opts="$linker_opts -LIBPATH:$file"
-}
-
-# func_cl_dashl library
-# Do a library search-path lookup for cl
-func_cl_dashl ()
-{
-  lib=$1
-  found=no
-  save_IFS=$IFS
-  IFS=';'
-  for dir in $lib_path $LIB
-  do
-    IFS=$save_IFS
-    if $shared && test -f "$dir/$lib.dll.lib"; then
-      found=yes
-      lib=$dir/$lib.dll.lib
-      break
-    fi
-    if test -f "$dir/$lib.lib"; then
-      found=yes
-      lib=$dir/$lib.lib
-      break
-    fi
-    if test -f "$dir/lib$lib.a"; then
-      found=yes
-      lib=$dir/lib$lib.a
-      break
-    fi
-  done
-  IFS=$save_IFS
-
-  if test "$found" != yes; then
-    lib=$lib.lib
-  fi
-}
-
-# func_cl_wrapper cl arg...
-# Adjust compile command to suit cl
-func_cl_wrapper ()
-{
-  # Assume a capable shell
-  lib_path=
-  shared=:
-  linker_opts=
-  for arg
-  do
-    if test -n "$eat"; then
-      eat=
-    else
-      case $1 in
-	-o)
-	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
-	  eat=1
-	  case $2 in
-	    *.o | *.[oO][bB][jJ])
-	      func_file_conv "$2"
-	      set x "$@" -Fo"$file"
-	      shift
-	      ;;
-	    *)
-	      func_file_conv "$2"
-	      set x "$@" -Fe"$file"
-	      shift
-	      ;;
-	  esac
-	  ;;
-	-I)
-	  eat=1
-	  func_file_conv "$2" mingw
-	  set x "$@" -I"$file"
-	  shift
-	  ;;
-	-I*)
-	  func_file_conv "${1#-I}" mingw
-	  set x "$@" -I"$file"
-	  shift
-	  ;;
-	-l)
-	  eat=1
-	  func_cl_dashl "$2"
-	  set x "$@" "$lib"
-	  shift
-	  ;;
-	-l*)
-	  func_cl_dashl "${1#-l}"
-	  set x "$@" "$lib"
-	  shift
-	  ;;
-	-L)
-	  eat=1
-	  func_cl_dashL "$2"
-	  ;;
-	-L*)
-	  func_cl_dashL "${1#-L}"
-	  ;;
-	-static)
-	  shared=false
-	  ;;
-	-Wl,*)
-	  arg=${1#-Wl,}
-	  save_ifs="$IFS"; IFS=','
-	  for flag in $arg; do
-	    IFS="$save_ifs"
-	    linker_opts="$linker_opts $flag"
-	  done
-	  IFS="$save_ifs"
-	  ;;
-	-Xlinker)
-	  eat=1
-	  linker_opts="$linker_opts $2"
-	  ;;
-	-*)
-	  set x "$@" "$1"
-	  shift
-	  ;;
-	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
-	  func_file_conv "$1"
-	  set x "$@" -Tp"$file"
-	  shift
-	  ;;
-	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
-	  func_file_conv "$1" mingw
-	  set x "$@" "$file"
-	  shift
-	  ;;
-	*)
-	  set x "$@" "$1"
-	  shift
-	  ;;
-      esac
-    fi
-    shift
-  done
-  if test -n "$linker_opts"; then
-    linker_opts="-link$linker_opts"
-  fi
-  exec "$@" $linker_opts
-  exit 1
-}
-
-eat=
-
-case $1 in
-  '')
-     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: compile [--help] [--version] PROGRAM [ARGS]
-
-Wrapper for compilers which do not understand '-c -o'.
-Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
-arguments, and rename the output as expected.
-
-If you are trying to build a whole package this is not the
-right script to run: please start by reading the file 'INSTALL'.
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "compile $scriptversion"
-    exit $?
-    ;;
-  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
-  icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
-    func_cl_wrapper "$@"      # Doesn't return...
-    ;;
-esac
-
-ofile=
-cfile=
-
-for arg
-do
-  if test -n "$eat"; then
-    eat=
-  else
-    case $1 in
-      -o)
-	# configure might choose to run compile as 'compile cc -o foo foo.c'.
-	# So we strip '-o arg' only if arg is an object.
-	eat=1
-	case $2 in
-	  *.o | *.obj)
-	    ofile=$2
-	    ;;
-	  *)
-	    set x "$@" -o "$2"
-	    shift
-	    ;;
-	esac
-	;;
-      *.c)
-	cfile=$1
-	set x "$@" "$1"
-	shift
-	;;
-      *)
-	set x "$@" "$1"
-	shift
-	;;
-    esac
-  fi
-  shift
-done
-
-if test -z "$ofile" || test -z "$cfile"; then
-  # If no '-o' option was seen then we might have been invoked from a
-  # pattern rule where we don't need one.  That is ok -- this is a
-  # normal compilation that the losing compiler can handle.  If no
-  # '.c' file was seen then we are probably linking.  That is also
-  # ok.
-  exec "$@"
-fi
-
-# Name of file we expect compiler to create.
-cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
-
-# Create the lock directory.
-# Note: use '[/\\:.-]' here to ensure that we don't use the same name
-# that we are using for the .o file.  Also, base the name on the expected
-# object file name, since that is what matters with a parallel build.
-lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
-while true; do
-  if mkdir "$lockdir" >/dev/null 2>&1; then
-    break
-  fi
-  sleep 1
-done
-# FIXME: race condition here if user kills between mkdir and trap.
-trap "rmdir '$lockdir'; exit 1" 1 2 15
-
-# Run the compile.
-"$@"
-ret=$?
-
-if test -f "$cofile"; then
-  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
-elif test -f "${cofile}bj"; then
-  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
-fi
-
-rmdir "$lockdir"
-exit $ret
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:
@@ -1,791 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2018-03-07.03; # UTC
-
-# Copyright (C) 1999-2021 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
-    exit 1;
-    ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by 'PROGRAMS ARGS'.
-  object      Object file output by 'PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputting dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-# Get the directory component of the given path, and save it in the
-# global variables '$dir'.  Note that this directory component will
-# be either empty or ending with a '/' character.  This is deliberate.
-set_dir_from ()
-{
-  case $1 in
-    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
-      *) dir=;;
-  esac
-}
-
-# Get the suffix-stripped basename of the given path, and save it the
-# global variable '$base'.
-set_base_from ()
-{
-  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
-}
-
-# If no dependency file was actually created by the compiler invocation,
-# we still have to create a dummy depfile, to avoid errors with the
-# Makefile "include basename.Plo" scheme.
-make_dummy_depfile ()
-{
-  echo "#dummy" > "$depfile"
-}
-
-# Factor out some common post-processing of the generated depfile.
-# Requires the auxiliary global variable '$tmpdepfile' to be set.
-aix_post_process_depfile ()
-{
-  # If the compiler actually managed to produce a dependency file,
-  # post-process it.
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form 'foo.o: dependency.h'.
-    # Do two passes, one to just change these to
-    #   $object: dependency.h
-    # and one to simply output
-    #   dependency.h:
-    # which is needed to avoid the deleted-header problem.
-    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
-      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
-    } > "$depfile"
-    rm -f "$tmpdepfile"
-  else
-    make_dummy_depfile
-  fi
-}
-
-# A tabulation character.
-tab='	'
-# A newline character.
-nl='
-'
-# Character ranges might be problematic outside the C locale.
-# These definitions help.
-upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
-lower=abcdefghijklmnopqrstuvwxyz
-digits=0123456789
-alpha=${upper}${lower}
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Avoid interferences from the environment.
-gccflag= dashmflag=
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-  # This is just like dashmstdout with a different argument.
-  dashmflag=-xM
-  depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
-  # This is just like msvisualcpp but w/o cygpath translation.
-  # Just convert the backslash-escaped backslashes to single forward
-  # slashes to satisfy depend.m4
-  cygpath_u='sed s,\\\\,/,g'
-  depmode=msvisualcpp
-fi
-
-if test "$depmode" = msvc7msys; then
-  # This is just like msvc7 but w/o cygpath translation.
-  # Just convert the backslash-escaped backslashes to single forward
-  # slashes to satisfy depend.m4
-  cygpath_u='sed s,\\\\,/,g'
-  depmode=msvc7
-fi
-
-if test "$depmode" = xlc; then
-  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
-  gccflag=-qmakedep=gcc,-MF
-  depmode=gcc
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am.  Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
-  for arg
-  do
-    case $arg in
-    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
-    *)  set fnord "$@" "$arg" ;;
-    esac
-    shift # fnord
-    shift # $arg
-  done
-  "$@"
-  stat=$?
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
-## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
-## (see the conditional assignment to $gccflag above).
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).  Also, it might not be
-##   supported by the other compilers which use the 'gcc' depmode.
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  # The second -e expression handles DOS-style file names with drive
-  # letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the "deleted header file" problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-## Some versions of gcc put a space before the ':'.  On the theory
-## that the space means something, we add a space to the output as
-## well.  hp depmode also adds that space, but also prefixes the VPATH
-## to the object.  Take care to not repeat it in the output.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-  tr ' ' "$nl" < "$tmpdepfile" \
-    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
-    | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like '#:fec' to the end of the
-    # dependency line.
-    tr ' ' "$nl" < "$tmpdepfile" \
-      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
-      | tr "$nl" ' ' >> "$depfile"
-    echo >> "$depfile"
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' "$nl" < "$tmpdepfile" \
-      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-      >> "$depfile"
-  else
-    make_dummy_depfile
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-xlc)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts '$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  set_dir_from "$object"
-  set_base_from "$object"
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$base.u
-    tmpdepfile3=$dir.libs/$base.u
-    "$@" -Wc,-M
-  else
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$dir$base.u
-    tmpdepfile3=$dir$base.u
-    "$@" -M
-  fi
-  stat=$?
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-    exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  aix_post_process_depfile
-  ;;
-
-tcc)
-  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
-  # FIXME: That version still under development at the moment of writing.
-  #        Make that this statement remains true also for stable, released
-  #        versions.
-  # It will wrap lines (doesn't matter whether long or short) with a
-  # trailing '\', as in:
-  #
-  #   foo.o : \
-  #    foo.c \
-  #    foo.h \
-  #
-  # It will put a trailing '\' even on the last line, and will use leading
-  # spaces rather than leading tabs (at least since its commit 0394caf7
-  # "Emit spaces for -MD").
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
-  # We have to change lines of the first kind to '$object: \'.
-  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
-  # And for each line of the second kind, we have to emit a 'dep.h:'
-  # dummy dependency, to avoid the deleted-header problem.
-  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-## The order of this option in the case statement is important, since the
-## shell code in configure will try each of these formats in the order
-## listed in this file.  A plain '-MD' option would be understood by many
-## compilers, so we must ensure this comes after the gcc and icc options.
-pgcc)
-  # Portland's C compiler understands '-MD'.
-  # Will always output deps to 'file.d' where file is the root name of the
-  # source file under compilation, even if file resides in a subdirectory.
-  # The object file name does not affect the name of the '.d' file.
-  # pgcc 10.2 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using '\' :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-  set_dir_from "$object"
-  # Use the source, not the object, to determine the base name, since
-  # that's sadly what pgcc will do too.
-  set_base_from "$source"
-  tmpdepfile=$base.d
-
-  # For projects that build the same source file twice into different object
-  # files, the pgcc approach of using the *source* file root name can cause
-  # problems in parallel builds.  Use a locking strategy to avoid stomping on
-  # the same $tmpdepfile.
-  lockdir=$base.d-lock
-  trap "
-    echo '$0: caught signal, cleaning up...' >&2
-    rmdir '$lockdir'
-    exit 1
-  " 1 2 13 15
-  numtries=100
-  i=$numtries
-  while test $i -gt 0; do
-    # mkdir is a portable test-and-set.
-    if mkdir "$lockdir" 2>/dev/null; then
-      # This process acquired the lock.
-      "$@" -MD
-      stat=$?
-      # Release the lock.
-      rmdir "$lockdir"
-      break
-    else
-      # If the lock is being held by a different process, wait
-      # until the winning process is done or we timeout.
-      while test -d "$lockdir" && test $i -gt 0; do
-        sleep 1
-        i=`expr $i - 1`
-      done
-    fi
-    i=`expr $i - 1`
-  done
-  trap - 1 2 13 15
-  if test $i -le 0; then
-    echo "$0: failed to acquire lock after $numtries attempts" >&2
-    echo "$0: check lockdir '$lockdir'" >&2
-    exit 1
-  fi
-
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h',
-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
-    | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp2)
-  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
-  # compilers, which have integrated preprocessors.  The correct option
-  # to use with these is +Maked; it writes dependencies to a file named
-  # 'foo.d', which lands next to the object file, wherever that
-  # happens to be.
-  # Much of this is similar to the tru64 case; see comments there.
-  set_dir_from  "$object"
-  set_base_from "$object"
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir.libs/$base.d
-    "$@" -Wc,+Maked
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    "$@" +Maked
-  fi
-  stat=$?
-  if test $stat -ne 0; then
-     rm -f "$tmpdepfile1" "$tmpdepfile2"
-     exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add 'dependent.h:' lines.
-    sed -ne '2,${
-               s/^ *//
-               s/ \\*$//
-               s/$/:/
-               p
-             }' "$tmpdepfile" >> "$depfile"
-  else
-    make_dummy_depfile
-  fi
-  rm -f "$tmpdepfile" "$tmpdepfile2"
-  ;;
-
-tru64)
-  # The Tru64 compiler uses -MD to generate dependencies as a side
-  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
-  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-  # dependencies in 'foo.d' instead, so we check for that too.
-  # Subdirectories are respected.
-  set_dir_from  "$object"
-  set_base_from "$object"
-
-  if test "$libtool" = yes; then
-    # Libtool generates 2 separate objects for the 2 libraries.  These
-    # two compilations output dependencies in $dir.libs/$base.o.d and
-    # in $dir$base.o.d.  We have to check for both files, because
-    # one of the two compilations can be disabled.  We should prefer
-    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-    # automatically cleaned when .libs/ is deleted, while ignoring
-    # the former would cause a distcleancheck panic.
-    tmpdepfile1=$dir$base.o.d          # libtool 1.5
-    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
-    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
-    "$@" -Wc,-MD
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    tmpdepfile3=$dir$base.d
-    "$@" -MD
-  fi
-
-  stat=$?
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-    exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  # Same post-processing that is required for AIX mode.
-  aix_post_process_depfile
-  ;;
-
-msvc7)
-  if test "$libtool" = yes; then
-    showIncludes=-Wc,-showIncludes
-  else
-    showIncludes=-showIncludes
-  fi
-  "$@" $showIncludes > "$tmpdepfile"
-  stat=$?
-  grep -v '^Note: including file: ' "$tmpdepfile"
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  # The first sed program below extracts the file names and escapes
-  # backslashes for cygpath.  The second sed program outputs the file
-  # name when reading, but also accumulates all include files in the
-  # hold buffer in order to output them again at the end.  This only
-  # works with sed implementations that can handle large buffers.
-  sed < "$tmpdepfile" -n '
-/^Note: including file:  *\(.*\)/ {
-  s//\1/
-  s/\\/\\\\/g
-  p
-}' | $cygpath_u | sort -u | sed -n '
-s/ /\\ /g
-s/\(.*\)/'"$tab"'\1 \\/p
-s/.\(.*\) \\/\1:/
-H
-$ {
-  s/.*/'"$tab"'/
-  G
-  p
-}' >> "$depfile"
-  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
-  rm -f "$tmpdepfile"
-  ;;
-
-msvc7msys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove '-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for ':'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
-  "$@" $dashmflag |
-    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this sed invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  tr ' ' "$nl" < "$tmpdepfile" \
-    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
-    | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no eat=no
-  for arg
-  do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    if test $eat = yes; then
-      eat=no
-      continue
-    fi
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -arch)
-      eat=yes ;;
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix=`echo "$object" | sed 's/^.*\././'`
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  # makedepend may prepend the VPATH from the source file name to the object.
-  # No need to regex-escape $object, excess matching of '.' is harmless.
-  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process the last invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed '1,2d' "$tmpdepfile" \
-    | tr ' ' "$nl" \
-    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
-    | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove '-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E \
-    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-    | sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-        set fnord "$@"
-        shift
-        shift
-        ;;
-    *)
-        set fnord "$@" "$arg"
-        shift
-        shift
-        ;;
-    esac
-  done
-  "$@" -E 2>/dev/null |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
-  echo "$tab" >> "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvcmsys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:
@@ -1,541 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2020-11-14.01; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# 'make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-tab='	'
-nl='
-'
-IFS=" $tab$nl"
-
-# Set DOITPROG to "echo" to test this script.
-
-doit=${DOITPROG-}
-doit_exec=${doit:-exec}
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-# Create dirs (including intermediate dirs) using mode 755.
-# This is like GNU 'install' as of coreutils 8.32 (2020).
-mkdir_umask=22
-
-backupsuffix=
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-is_target_a_directory=possibly
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
-     --help     display this help and exit.
-     --version  display version info and exit.
-
-  -c            (ignored)
-  -C            install only if different (preserve data modification time)
-  -d            create directories instead of installing files.
-  -g GROUP      $chgrpprog installed files to GROUP.
-  -m MODE       $chmodprog installed files to MODE.
-  -o USER       $chownprog installed files to USER.
-  -p            pass -p to $cpprog.
-  -s            $stripprog installed files.
-  -S SUFFIX     attempt to back up existing files, with suffix SUFFIX.
-  -t DIRECTORY  install into DIRECTORY.
-  -T            report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
-  RMPROG STRIPPROG
-
-By default, rm is invoked with -f; when overridden with RMPROG,
-it's up to you to specify -f if you want it.
-
-If -S is not specified, no backups are attempted.
-
-Email bug reports to bug-automake@gnu.org.
-Automake home page: https://www.gnu.org/software/automake/
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) ;;
-
-    -C) copy_on_change=true;;
-
-    -d) dir_arg=true;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-        case $mode in
-          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
-            echo "$0: invalid mode: $mode" >&2
-            exit 1;;
-        esac
-        shift;;
-
-    -o) chowncmd="$chownprog $2"
-        shift;;
-
-    -p) cpprog="$cpprog -p";;
-
-    -s) stripcmd=$stripprog;;
-
-    -S) backupsuffix="$2"
-        shift;;
-
-    -t)
-        is_target_a_directory=always
-        dst_arg=$2
-        # Protect names problematic for 'test' and other utilities.
-        case $dst_arg in
-          -* | [=\(\)!]) dst_arg=./$dst_arg;;
-        esac
-        shift;;
-
-    -T) is_target_a_directory=never;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --) shift
-        break;;
-
-    -*) echo "$0: invalid option: $1" >&2
-        exit 1;;
-
-    *)  break;;
-  esac
-  shift
-done
-
-# We allow the use of options -d and -T together, by making -d
-# take the precedence; this is for compatibility with GNU install.
-
-if test -n "$dir_arg"; then
-  if test -n "$dst_arg"; then
-    echo "$0: target directory not allowed when installing a directory." >&2
-    exit 1
-  fi
-fi
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dst_arg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dst_arg"
-      shift # fnord
-    fi
-    shift # arg
-    dst_arg=$arg
-    # Protect names problematic for 'test' and other utilities.
-    case $dst_arg in
-      -* | [=\(\)!]) dst_arg=./$dst_arg;;
-    esac
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call 'install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  if test $# -gt 1 || test "$is_target_a_directory" = always; then
-    if test ! -d "$dst_arg"; then
-      echo "$0: $dst_arg: Is not a directory." >&2
-      exit 1
-    fi
-  fi
-fi
-
-if test -z "$dir_arg"; then
-  do_exit='(exit $ret); exit $ret'
-  trap "ret=129; $do_exit" 1
-  trap "ret=130; $do_exit" 2
-  trap "ret=141; $do_exit" 13
-  trap "ret=143; $do_exit" 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-        u_plus_rw=
-      else
-        u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-        u_plus_rw=
-      else
-        u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names problematic for 'test' and other utilities.
-  case $src in
-    -* | [=\(\)!]) src=./$src;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-    # Don't chown directories that already exist.
-    if test $dstdir_status = 0; then
-      chowncmd=""
-    fi
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dst_arg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-    dst=$dst_arg
-
-    # If destination is a directory, append the input filename.
-    if test -d "$dst"; then
-      if test "$is_target_a_directory" = never; then
-        echo "$0: $dst_arg: Is a directory" >&2
-        exit 1
-      fi
-      dstdir=$dst
-      dstbase=`basename "$src"`
-      case $dst in
-	*/) dst=$dst$dstbase;;
-	*)  dst=$dst/$dstbase;;
-      esac
-      dstdir_status=0
-    else
-      dstdir=`dirname "$dst"`
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  case $dstdir in
-    */) dstdirslash=$dstdir;;
-    *)  dstdirslash=$dstdir/;;
-  esac
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-        # With -d, create the new directory with the user-specified mode.
-        # Otherwise, rely on $mkdir_umask.
-        if test -n "$dir_arg"; then
-          mkdir_mode=-m$mode
-        else
-          mkdir_mode=
-        fi
-
-        posix_mkdir=false
-	# The $RANDOM variable is not portable (e.g., dash).  Use it
-	# here however when possible just to lower collision chance.
-	tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-
-	trap '
-	  ret=$?
-	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null
-	  exit $ret
-	' 0
-
-	# Because "mkdir -p" follows existing symlinks and we likely work
-	# directly in world-writeable /tmp, make sure that the '$tmpdir'
-	# directory is successfully created first before we actually test
-	# 'mkdir -p'.
-	if (umask $mkdir_umask &&
-	    $mkdirprog $mkdir_mode "$tmpdir" &&
-	    exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
-	then
-	  if test -z "$dir_arg" || {
-	       # Check for POSIX incompatibilities with -m.
-	       # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-	       # other-writable bit of parent directory when it shouldn't.
-	       # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-	       test_tmpdir="$tmpdir/a"
-	       ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
-	       case $ls_ld_tmpdir in
-		 d????-?r-*) different_mode=700;;
-		 d????-?--*) different_mode=755;;
-		 *) false;;
-	       esac &&
-	       $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
-		 ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
-		 test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-	       }
-	     }
-	  then posix_mkdir=:
-	  fi
-	  rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
-	else
-	  # Remove any dirs left behind by ancient mkdir implementations.
-	  rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
-	fi
-	trap '' 0;;
-    esac
-
-    if
-      $posix_mkdir && (
-        umask $mkdir_umask &&
-        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-        /*) prefix='/';;
-        [-=\(\)!]*) prefix='./';;
-        *)  prefix='';;
-      esac
-
-      oIFS=$IFS
-      IFS=/
-      set -f
-      set fnord $dstdir
-      shift
-      set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-        test X"$d" = X && continue
-
-        prefix=$prefix$d
-        if test -d "$prefix"; then
-          prefixes=
-        else
-          if $posix_mkdir; then
-            (umask $mkdir_umask &&
-             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-            # Don't fail if two instances are running concurrently.
-            test -d "$prefix" || exit 1
-          else
-            case $prefix in
-              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-              *) qprefix=$prefix;;
-            esac
-            prefixes="$prefixes '$qprefix'"
-          fi
-        fi
-        prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-        # Don't fail if two instances are running concurrently.
-        (umask $mkdir_umask &&
-         eval "\$doit_exec \$mkdirprog $prefixes") ||
-          test -d "$dstdir" || exit 1
-        obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=${dstdirslash}_inst.$$_
-    rmtmp=${dstdirslash}_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask &&
-     { test -z "$stripcmd" || {
-	 # Create $dsttmp read-write so that cp doesn't create it read-only,
-	 # which would cause strip to fail.
-	 if test -z "$doit"; then
-	   : >"$dsttmp" # No need to fork-exec 'touch'.
-	 else
-	   $doit touch "$dsttmp"
-	 fi
-       }
-     } &&
-     $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
-    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
-    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # If -C, don't bother to copy if it wouldn't change the file.
-    if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
-       set -f &&
-       set X $old && old=:$2:$4:$5:$6 &&
-       set X $new && new=:$2:$4:$5:$6 &&
-       set +f &&
-       test "$old" = "$new" &&
-       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
-    then
-      rm -f "$dsttmp"
-    else
-      # If $backupsuffix is set, and the file being installed
-      # already exists, attempt a backup.  Don't worry if it fails,
-      # e.g., if mv doesn't support -f.
-      if test -n "$backupsuffix" && test -f "$dst"; then
-        $doit $mvcmd -f "$dst" "$dst$backupsuffix" 2>/dev/null
-      fi
-
-      # Rename the file to the real destination.
-      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
-      # The rename failed, perhaps because mv can't rename something else
-      # to itself, or perhaps because mv is so ancient that it does not
-      # support -f.
-      {
-        # Now remove or move aside any old file at destination location.
-        # We try this two ways since rm can't unlink itself on some
-        # systems and the destination file might be busy for other
-        # reasons.  In this case, the final cleanup might fail but the new
-        # file should still install successfully.
-        {
-          test ! -f "$dst" ||
-          $doit $rmcmd "$dst" 2>/dev/null ||
-          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-            { $doit $rmcmd "$rmtmp" 2>/dev/null; :; }
-          } ||
-          { echo "$0: cannot unlink or rename $dst" >&2
-            (exit 1); exit 1
-          }
-        } &&
-
-        # Now rename the file to the real destination.
-        $doit $mvcmd "$dsttmp" "$dst"
-      }
-    fi || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
MrPurple666	df3c5036d7	NCE: C++ ftw	2025-05-23 21:47:37 -03:00
MrPurple666	2e422ab082	NCE: I hate asm btw	2025-05-23 21:10:40 -03:00