hello world

neo/curl/tests/FILEFORMAT

@@ -0,0 +1,158 @@
+ The file format of the test suite is a very simple and extendable format. All
+data for a single test case resides in a single ASCII file. Labels mark the
+beginning and the end of all sections. Each label must be written in its own
+line and is resembling XML/HTML.
+
+ Each file is split up in three main sections: reply, client and verify. The
+reply section is used for the server to know what to send as a reply for the
+requests curl sends, the client section defines how the client should behave
+while the verify section defines how to verify that the data stored after a
+command has been run ended up correctly.
+
+ Each main section has a number of available subsections that can be
+specified, that will be checked/used if specified. This document includes all
+the subsections currently supported.
+
+<reply>
+<data [nocheck=1]>
+data to sent to the client on its request and later verified that it arrived
+safely. Set the nocheck=1 to prevent the test script to verify the arrival
+of this data.
+
+If the data contains 'swsclose' *anywhere* within the start and end tag, and
+this is a HTTP test, then the connection will be closed by the server after
+this response is sent. If not, the connection will be kept persistant.
+</data>
+<dataNUM>
+Send back this contents instead of the <data> one. The num is set by:
+A) The test number in the request line is >10000 and this is the remainder
+of [test case number]%10000.
+B) The request was HTTP and included digest details, which adds 1000 to NUM
+C) If a HTTP request is NTLM type-1, it adds 1001 to num
+D) If a HTTP request is NTLM type-3, it adds 1002 to num
+</dateNUM>
+<datacheck [nonewline=yes]>
+if the data is sent but this is what should be checked afterwards. If
+'nonewline' is set, we will cut off the trailing newline of this given data
+before comparing with the one actually received by the client
+</datacheck>
+<size>
+number to return on a ftp SIZE command (set to -1 to make this command fail)
+</size>
+<mdtm>
+what to send back if the client sends a (FTP) MDTM command, set to -1 to
+have it return that the file doesn't exist
+</mdtm>
+<cmd>
+special purpose server-command to control its behavior *before* the
+reply is sent
+</cmd>
+<postcmd>
+special purpose server-command to control its behavior *after* the
+reply is sent
+</postcmd>
+</reply>
+
+<client>
+
+<server>
+protocols as in 'http' 'ftp' etc. Give only one per line. Used for test cases
+500+ (at this point) to specify which servers the test case requires. In the
+future all test cases should use this. Makes us independent of the test
+case number.
+</server>
+
+<features>
+A list of features that must be present in the client/library for this test
+to be able to run. Features testable here are:
+SSL
+netrc_debug
+large_file
+</features>
+
+<killserver>
+Using the same syntax as in <server> but when mentioned here these servers
+are explicitly KILLED when this test case is completed. Only use this if there
+is no other alternatives. Using this of course requires subsequent tests to
+restart servers.
+</killserver>
+
+<tool>
+Name of tool to use instead of "curl". This tool must be built and exist
+in the libtest/ directory.
+</tool>
+
+<name>
+test case description
+</name>
+
+<setenv>
+variable1=contents1
+variable2=contents2
+
+Set the given environment variables to the specified value before the actual
+command is run, they are clear again after the command has been run.
+</setenv>
+
+<command [option=no-output]>
+command line to run, there's a bunch of %variables that get replaced
+accordingly.
+
+Note that the URL that gets passed to the server actually controls what data
+that is returned. The last slash in the URL must be followed by a number. That
+number (N) will be used by the test-server to load test case N and return the
+data that is defined within the <reply><data></data></reply> section.
+
+If a CONNECT is used to the server (to emulate HTTPS etc over proxy), the port
+number given in the CONNECT request will be used to identify which test that
+is being run, if the proxy host name is said to start with 'test'.
+
+Set 'option=no-output' to prevent the test script to slap on the --output
+argument that directs the output to a file. The --output is also not added if
+the client/stdout section is used.
+
+Available substitute variables include:
+%HOSTIP    - IP address of the host running this test
+%HOSTPORT  - Port number of the HTTP server
+%HTTPSPORT - Port number of the HTTPS server
+%FTPPORT   - Port number of the FTP server
+%FTPSPORT  - Port number of the FTPS server
+%SRCDIR    - Full path to the source dir
+%PWD       - Current directory
+</command>
+
+<file name="log/filename">
+this creates the named file with this content before the test case is run
+which is useful if the test case needs a file to act on.
+</file>
+
+<stdin>
+Pass this given data on stdin to the tool.
+</stdin>
+
+</client>
+
+<verify>
+<errorcode>
+numerical error code curl is supposed to return
+</errorcode>
+<strip>
+One regex per line that is removed from the protocol dumps before the
+comparison is made. This is very useful to remove dependencies on dynamicly
+changing protocol data such as port numbers or user-agent strings.
+</strip>
+<protocol [nonewline=yes]>
+the protocol dump curl should transmit, if 'nonewline' is set, we will cut
+off the trailing newline of this given data before comparing with the one
+actually sent by the client
+</protocol>
+<stdout>
+This verfies that this data was passed to stdout.
+</stdout>
+<file name="log/filename">
+the file's contents must be identical to this
+</file>
+<upload>
+the contents of the upload data curl should have sent
+</upload>
+</verify>

neo/curl/tests/Makefile.am

@@ -0,0 +1,46 @@
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at http://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+# $Id: Makefile.am,v 1.30 2004/02/12 14:43:13 bagder Exp $
+###########################################################################
+EXTRA_DIST = ftpserver.pl httpserver.pl httpsserver.pl runtests.pl \
+	     ftpsserver.pl getpart.pm FILEFORMAT README \
+	     stunnel.pem memanalyze.pl
+
+SUBDIRS = data server libtest
+
+PERLFLAGS = -I$(srcdir)
+
+CLEANFILES = .http.pid .https.pid .ftp.pid .ftps.pid
+
+curl:
+	@cd $(top_builddir) && $(MAKE)
+
+test: sws
+	srcdir=$(srcdir) $(PERL) $(PERLFLAGS) $(srcdir)/runtests.pl
+
+quiet-test: sws
+	srcdir=$(srcdir) $(PERL) $(PERLFLAGS) $(srcdir)/runtests.pl -s -a
+
+full-test: sws
+	srcdir=$(srcdir) $(PERL) $(PERLFLAGS) $(srcdir)/runtests.pl -a
+
+sws:
+	@cd server && $(MAKE)

neo/curl/tests/Makefile.in

@@ -0,0 +1,536 @@
+# Makefile.in generated by automake 1.8.3 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = tests
+DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/lib/config.h \
+	$(top_builddir)/src/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-exec-recursive install-info-recursive \
+	install-recursive installcheck-recursive installdirs-recursive \
+	pdf-recursive ps-recursive uninstall-info-recursive \
+	uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CABUNDLE_FALSE = @CABUNDLE_FALSE@
+CABUNDLE_TRUE = @CABUNDLE_TRUE@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURL_CA_BUNDLE = @CURL_CA_BUNDLE@
+CURL_DISABLE_DICT = @CURL_DISABLE_DICT@
+CURL_DISABLE_FILE = @CURL_DISABLE_FILE@
+CURL_DISABLE_FTP = @CURL_DISABLE_FTP@
+CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@
+CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@
+CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@
+CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+HAVE_ARES = @HAVE_ARES@
+HAVE_LIBZ = @HAVE_LIBZ@
+HAVE_LIBZ_FALSE = @HAVE_LIBZ_FALSE@
+HAVE_LIBZ_TRUE = @HAVE_LIBZ_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+IPV6_ENABLED = @IPV6_ENABLED@
+KRB4_ENABLED = @KRB4_ENABLED@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+MANOPT = @MANOPT@
+MIMPURE_FALSE = @MIMPURE_FALSE@
+MIMPURE_TRUE = @MIMPURE_TRUE@
+NO_UNDEFINED_FALSE = @NO_UNDEFINED_FALSE@
+NO_UNDEFINED_TRUE = @NO_UNDEFINED_TRUE@
+NROFF = @NROFF@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OPENSSL_ENABLED = @OPENSSL_ENABLED@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PKGADD_NAME = @PKGADD_NAME@
+PKGADD_PKG = @PKGADD_PKG@
+PKGADD_VENDOR = @PKGADD_VENDOR@
+PKGCONFIG = @PKGCONFIG@
+RANDOM_FILE = @RANDOM_FILE@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_MANUAL_FALSE = @USE_MANUAL_FALSE@
+USE_MANUAL_TRUE = @USE_MANUAL_TRUE@
+VERSION = @VERSION@
+VERSIONNUM = @VERSIONNUM@
+YACC = @YACC@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_AS = @ac_ct_AS@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DLLTOOL = @ac_ct_DLLTOOL@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_OBJDUMP = @ac_ct_OBJDUMP@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+
+#***************************************************************************
+#                                  _   _ ____  _
+#  Project                     ___| | | |  _ \| |
+#                             / __| | | | |_) | |
+#                            | (__| |_| |  _ <| |___
+#                             \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1998 - 2004, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at http://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+# $Id: Makefile.am,v 1.30 2004/02/12 14:43:13 bagder Exp $
+###########################################################################
+EXTRA_DIST = ftpserver.pl httpserver.pl httpsserver.pl runtests.pl \
+	     ftpsserver.pl getpart.pm FILEFORMAT README \
+	     stunnel.pem memanalyze.pl
+
+SUBDIRS = data server libtest
+PERLFLAGS = -I$(srcdir)
+CLEANFILES = .http.pid .https.pid .ftp.pid .ftps.pid
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  tests/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  tests/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if (etags --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	else \
+	  include_option=--include; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || mkdir "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="../$(top_distdir)" \
+	        distdir="../$(distdir)/$$subdir" \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
+	clean clean-generic clean-libtool clean-recursive ctags \
+	ctags-recursive distclean distclean-generic distclean-libtool \
+	distclean-recursive distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-exec install-exec-am install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic maintainer-clean-recursive \
+	mostlyclean mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am uninstall-info-am
+
+
+curl:
+	@cd $(top_builddir) && $(MAKE)
+
+test: sws
+	srcdir=$(srcdir) $(PERL) $(PERLFLAGS) $(srcdir)/runtests.pl
+
+quiet-test: sws
+	srcdir=$(srcdir) $(PERL) $(PERLFLAGS) $(srcdir)/runtests.pl -s -a
+
+full-test: sws
+	srcdir=$(srcdir) $(PERL) $(PERLFLAGS) $(srcdir)/runtests.pl -a
+
+sws:
+	@cd server && $(MAKE)
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

neo/curl/tests/README

@@ -0,0 +1,88 @@
+                                  _   _ ____  _     
+                              ___| | | |  _ \| |    
+                             / __| | | | |_) | |    
+                            | (__| |_| |  _ <| |___ 
+                             \___|\___/|_| \_\_____|
+
+The cURL Test Suite
+
+Requires:
+  perl (and a unix-style shell)
+  diff (when a test fail, a diff is shown)
+  stunnel (for HTTPS and FTPS tests)
+
+TCP ports used:
+
+  - 8999 on localhost for HTTP tests
+  - 8433 on localhost for HTTPS tests
+  - 8921 on localhost for FTP tests
+  - 8821 on localhost for FTPS tests (currently disabled)
+
+  The test suite runs simple FTP and HTTP servers on these ports to which
+  it makes requests.
+
+Run:
+  'make test'. This invokes the 'runtests.pl' perl script. Edit the top
+  variables of that script in case you have some specific needs.
+
+  The script breaks on the first test that doesn't do OK. Use -a to prevent
+  the script to abort on the first error. Run the script with -v for more
+  verbose output. Use -d to run the test servers with debug output enabled as
+  well.
+
+  Use -s for shorter output, or pass test numbers to run specific tests only
+  (like "./runtests.pl 3 4" to test 3 and 4 only). It also supports test case
+  ranges with 'to'. As in "./runtests 3 to 9" which runs the seven tests from
+  3 to 9.
+
+Memory:
+  The test script will check that all allocated memory is freed properly IF
+  curl has been built with the CURLDEBUG define set. The script will
+  automatically detect if that is the case, and it will use the ../memanalyze
+  script to analyze the memory debugging output.
+
+Debug:
+  If a test case fails, you can conveniently get the script to invoke the
+  debugger (gdb) for you with the server running and the exact same command
+  line parameters that failed. Just invoke 'runtests.pl <test number> -g' and
+  then just type 'run' in the debugger to perform the command through the
+  debugger.
+
+  If a test case causes a core dump, analyze it by running gdb like:
+
+          # gdb ../curl/src core
+
+  ... and get a stack trace with the gdb command:
+
+          (gdb) where
+
+Logs:
+  All logs are generated in the logs/ subdirctory (it is emptied first
+  in the runtests.pl script). Use runtests.pl -k to keep the temporary files
+  after the test run.
+
+Data:
+  All test cases are put in the data/ subdirctory. Each test is stored in the
+  file named according to the test number.
+
+  See FILEFORMAT for the description of the test case files.
+
+
+TEST CASE NUMBERS
+
+ So far, I've used this system:
+
+ 1   -  99   HTTP
+ 100 - 199   FTP
+ 200 - 299   FILE
+ 300 - 399   HTTPS
+ 400 - 499   FTPS
+ 500 - 599   libcurl source code tests, not using the curl command tool
+
+ Since 30-apr-2003, there's nothing in the system that requires us to keep
+ within these number series. Each test case now specifies its own server
+ requirements, independent of test number.
+
+TODO:
+
+  * Add tests for TELNET, GOPHER, LDAP, DICT...

neo/curl/tests/data/Makefile.am

@@ -0,0 +1,30 @@
+iall:
+install:
+test:
+
+EXTRA_DIST = \
+test1    test108  test117  test127  test20   test27   test34   test46 \
+test10   test109  test118  test13   test200  test28   test36   test47 \
+test100  test11   test119  test14   test201  test29   test37   test5 \
+test101  test110  test12   test15   test202  test3    test4    test6 \
+test102  test111  test120  test16   test21   test30     test7 \
+test103  test112  test121  test17   test22   test300    test8 \
+test104  test113  test122  test18   test23   test301    test9 \
+test105  test114  test123  test19   test24   test302  test43   test31 \
+test106  test115  test124  test190  test25   test303  test44   test38 \
+test107  test116  test125  test2    test26   test33   test45   test126 \
+test304  test39   test32   test128  test48 test306 \
+test130  test131  test132  test133  test134 test135 test305 \
+test49 test50 test51 test52 test53 test54 test55 test56 \
+test500 test501 test502 test503 test504 test136 test57 test137 test138 \
+test58 test139 test140 test141 test59 test60 test61 test142 test143 \
+test62 test63 test64 test65 test66 test144 test145 test67 test68 test41 \
+test40 test42 test69 test70 test71 test72 test73 test146 test505 \
+test74 test75 test76 test77 test78 test147 test148 test506 test79 test80 \
+test81 test82 test83 test84 test85 test86 test87 test507 test149 test88 \
+test89 test90 test508 test91 test92 test203 test93 test94 test95 test509 \
+test510 test97 test98 test99
+
+# The following tests have been removed from the dist since they no longer
+# work. We need to fix the test suite's FTPS server first, then bring them
+# back: test400 test401 test402 test403

neo/curl/tests/data/Makefile.in

@@ -0,0 +1,380 @@
+# Makefile.in generated by automake 1.8.3 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+subdir = tests/data
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/lib/config.h \
+	$(top_builddir)/src/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CABUNDLE_FALSE = @CABUNDLE_FALSE@
+CABUNDLE_TRUE = @CABUNDLE_TRUE@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURL_CA_BUNDLE = @CURL_CA_BUNDLE@
+CURL_DISABLE_DICT = @CURL_DISABLE_DICT@
+CURL_DISABLE_FILE = @CURL_DISABLE_FILE@
+CURL_DISABLE_FTP = @CURL_DISABLE_FTP@
+CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@
+CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@
+CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@
+CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+HAVE_ARES = @HAVE_ARES@
+HAVE_LIBZ = @HAVE_LIBZ@
+HAVE_LIBZ_FALSE = @HAVE_LIBZ_FALSE@
+HAVE_LIBZ_TRUE = @HAVE_LIBZ_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+IPV6_ENABLED = @IPV6_ENABLED@
+KRB4_ENABLED = @KRB4_ENABLED@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+MANOPT = @MANOPT@
+MIMPURE_FALSE = @MIMPURE_FALSE@
+MIMPURE_TRUE = @MIMPURE_TRUE@
+NO_UNDEFINED_FALSE = @NO_UNDEFINED_FALSE@
+NO_UNDEFINED_TRUE = @NO_UNDEFINED_TRUE@
+NROFF = @NROFF@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OPENSSL_ENABLED = @OPENSSL_ENABLED@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PKGADD_NAME = @PKGADD_NAME@
+PKGADD_PKG = @PKGADD_PKG@
+PKGADD_VENDOR = @PKGADD_VENDOR@
+PKGCONFIG = @PKGCONFIG@
+RANDOM_FILE = @RANDOM_FILE@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_MANUAL_FALSE = @USE_MANUAL_FALSE@
+USE_MANUAL_TRUE = @USE_MANUAL_TRUE@
+VERSION = @VERSION@
+VERSIONNUM = @VERSIONNUM@
+YACC = @YACC@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_AS = @ac_ct_AS@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DLLTOOL = @ac_ct_DLLTOOL@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_OBJDUMP = @ac_ct_OBJDUMP@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = \
+test1    test108  test117  test127  test20   test27   test34   test46 \
+test10   test109  test118  test13   test200  test28   test36   test47 \
+test100  test11   test119  test14   test201  test29   test37   test5 \
+test101  test110  test12   test15   test202  test3    test4    test6 \
+test102  test111  test120  test16   test21   test30     test7 \
+test103  test112  test121  test17   test22   test300    test8 \
+test104  test113  test122  test18   test23   test301    test9 \
+test105  test114  test123  test19   test24   test302  test43   test31 \
+test106  test115  test124  test190  test25   test303  test44   test38 \
+test107  test116  test125  test2    test26   test33   test45   test126 \
+test304  test39   test32   test128  test48 test306 \
+test130  test131  test132  test133  test134 test135 test305 \
+test49 test50 test51 test52 test53 test54 test55 test56 \
+test500 test501 test502 test503 test504 test136 test57 test137 test138 \
+test58 test139 test140 test141 test59 test60 test61 test142 test143 \
+test62 test63 test64 test65 test66 test144 test145 test67 test68 test41 \
+test40 test42 test69 test70 test71 test72 test73 test146 test505 \
+test74 test75 test76 test77 test78 test147 test148 test506 test79 test80 \
+test81 test82 test83 test84 test85 test86 test87 test507 test149 test88 \
+test89 test90 test508 test91 test92 test203 test93 test94 test95 test509 \
+test510 test97 test98 test99
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  tests/data/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  tests/data/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-exec install-exec-am \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-info-am
+
+iall:
+install:
+test:
+
+# The following tests have been removed from the dist since they no longer
+# work. We need to fix the test suite's FTPS server first, then bring them
+# back: test400 test401 test402 test403
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

neo/curl/tests/data/test1

@@ -0,0 +1,47 @@
+#
+# Server-side
+<reply name="1">
+<data>
+HTTP/1.1 200 OK
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+Last-Modified: Tue, 13 Jun 2000 12:10:00 GMT
+ETag: "21025-dc7-39462498"
+Accept-Ranges: bytes
+Content-Length: 6
+Connection: close
+Content-Type: text/html
+Funny-head: yesyes
+
+<foo>
+</data>
+</reply>
+
+#
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+simple HTTP GET
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/1
+</command>
+</client>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /1 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>

neo/curl/tests/data/test10

@@ -0,0 +1,60 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.0 200 OK swsclose
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+
+blablabla
+
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+simple HTTP PUT from file
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/we/want/10 -T log/test10.txt
+</command>
+<file name="log/test10.txt">
+Weird
+     file
+         to
+   upload
+for
+   testing
+the
+   PUT
+      feature
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+PUT /we/want/10 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+Content-Length: 78
+Expect: 100-continue
+
+Weird
+     file
+         to
+   upload
+for
+   testing
+the
+   PUT
+      feature
+</protocol>
+</verify>

neo/curl/tests/data/test100

@@ -0,0 +1,48 @@
+#
+# Server-side
+<reply name="1">
+<data>
+total 20
+drwxr-xr-x   8 98       98           512 Oct 22 13:06 .
+drwxr-xr-x   8 98       98           512 Oct 22 13:06 ..
+drwxr-xr-x   2 98       98           512 May  2  1996 .NeXT
+-r--r--r--   1 0        1             35 Jul 16  1996 README
+lrwxrwxrwx   1 0        1              7 Dec  9  1999 bin -> usr/bin
+dr-xr-xr-x   2 0        1            512 Oct  1  1997 dev
+drwxrwxrwx   2 98       98           512 May 29 16:04 download.html
+dr-xr-xr-x   2 0        1            512 Nov 30  1995 etc
+drwxrwxrwx   2 98       1            512 Oct 30 14:33 pub
+dr-xr-xr-x   5 0        1            512 Oct  1  1997 usr
+</data>
+</reply>
+
+#
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP dir list PASV
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/
+</command>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+filter off really nothing
+</strip>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+TYPE A
+LIST
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test101

@@ -0,0 +1,48 @@
+# Server-side
+<reply>
+<data>
+total 20
+drwxr-xr-x   8 98       98           512 Oct 22 13:06 .
+drwxr-xr-x   8 98       98           512 Oct 22 13:06 ..
+drwxr-xr-x   2 98       98           512 May  2  1996 .NeXT
+-r--r--r--   1 0        1             35 Jul 16  1996 README
+lrwxrwxrwx   1 0        1              7 Dec  9  1999 bin -> usr/bin
+dr-xr-xr-x   2 0        1            512 Oct  1  1997 dev
+drwxrwxrwx   2 98       98           512 May 29 16:04 download.html
+dr-xr-xr-x   2 0        1            512 Nov 30  1995 etc
+drwxrwxrwx   2 98       1            512 Oct 30 14:33 pub
+dr-xr-xr-x   5 0        1            512 Oct  1  1997 usr
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP dir list, PORT with specified IP
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/ -P %HOSTIP
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+# strip all kinds of PORT, EPRT and LPRT curl can do
+<strip>
+^PORT 127,0,0,1,.*
+^EPRT.*
+^LPRT.*
+</strip>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+PORT 127,0,0,1,243,212
+TYPE A
+LIST
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test102

@@ -0,0 +1,43 @@
+# Server-side
+<reply>
+<data>
+data
+    to
+      see
+that FTP
+works
+  so does it?
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP RETR PASV
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/102
+</command>
+</test>
+<file name="log/ftpserver.cmd">
+REPLY EPSV 500 no such command
+</file>
+
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+PASV
+TYPE I
+SIZE 102
+RETR 102
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test103

@@ -0,0 +1,45 @@
+# Server-side
+<reply>
+<data>
+data
+    to
+      see
+that FTP
+works
+  so does it?
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP RETR PORT with CWD
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/a/path/103 -P -
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^PORT .*
+^EPRT.*
+^LPRT.*
+</strip>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD a
+CWD path
+PORT 127,0,0,1,246,33
+TYPE I
+SIZE 103
+RETR 103
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test104

@@ -0,0 +1,35 @@
+# Server-side
+<reply>
+<size>
+51
+</size>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP --head to get file size only
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/a/path/103 --head
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD a
+CWD path
+MDTM 103
+TYPE I
+SIZE 103
+REST 0
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test105

@@ -0,0 +1,43 @@
+# Server-side
+<reply>
+<data>
+data
+    to
+      see
+that FTP
+works
+  so does it?
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP user+password in URL and ASCII transfer
+ </name>
+ <command>
+ftp://userdude:passfellow@%HOSTIP:%FTPPORT/103 --use-ascii
+</command>
+<file name="log/ftpserver.cmd">
+REPLY EPSV 500 no such command
+REPLY SIZE 500 no such command
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER userdude
+PASS passfellow
+PWD
+EPSV
+PASV
+TYPE A
+SIZE 103
+RETR 103
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test106

@@ -0,0 +1,40 @@
+# Server-side
+<reply>
+<data>
+data
+    to
+      see
+that FTP
+works
+  so does it?
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP GET with type=A style ASCII URL using %20 codes
+ </name>
+ <command>
+"ftp://%HOSTIP:%FTPPORT//path%20with%20%20spaces//and%20things2/106;type=A"
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD /path with  spaces
+CWD and things2
+EPSV
+TYPE A
+SIZE 106
+RETR 106
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test107

@@ -0,0 +1,42 @@
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP PASV upload file
+ </name>
+<file name="log/test107.txt">
+data
+    to
+      see
+that FTP
+works
+  so does it?
+</file>
+ <command>
+ftp://%HOSTIP:%FTPPORT/107 -T log/test107.txt
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<upload>
+data
+    to
+      see
+that FTP
+works
+  so does it?
+</upload>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+TYPE I
+STOR 107
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test108

@@ -0,0 +1,47 @@
+# Server-side
+<reply>
+<data>
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP PORT upload with CWD
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/CWD/STOR/RETR/108 -T log/upload108 -P -
+</command>
+<file name="log/upload108">
+Moooooooooooo
+ upload this
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^PORT .*
+^EPRT .*
+^LPRT .*
+</strip>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD CWD
+CWD STOR
+CWD RETR
+PORT 127,0,0,1,5,109
+TYPE I
+STOR 108
+QUIT
+</protocol>
+<upload>
+Moooooooooooo
+ upload this
+</upload>
+</verify>

neo/curl/tests/data/test109

@@ -0,0 +1,41 @@
+# Server-side
+<reply>
+<data>
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP PASV upload append
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/109 -T log/upload109 --append
+</command>
+<file name="log/upload109">
+Moooooooooooo
+ upload this
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+</strip>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+TYPE I
+APPE 109
+QUIT
+</protocol>
+<upload>
+Moooooooooooo
+ upload this
+</upload>
+</verify>

neo/curl/tests/data/test11

@@ -0,0 +1,67 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 301 This is a weirdo text message swsclose
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+Location: data/110002.txt?coolsite=yes
+Connection: close
+
+This server reply is for testing a simple Location: following
+
+</data>
+<data2>
+HTTP/1.1 200 Followed here fine swsclose
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+
+If this is received, the location following worked
+
+</data2>
+<datacheck>
+HTTP/1.1 301 This is a weirdo text message swsclose
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+Location: data/110002.txt?coolsite=yes
+Connection: close
+
+HTTP/1.1 200 Followed here fine swsclose
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+
+If this is received, the location following worked
+
+</datacheck>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+simple HTTP Location: following
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/want/11 -L
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /want/11 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+GET /want/data/110002.txt?coolsite=yes HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>

neo/curl/tests/data/test110

@@ -0,0 +1,44 @@
+# Server-side
+<reply>
+<data>
+expected to be a file without the first part
+but we emulate that
+</data>
+<size>
+85
+</size>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download resume with set limit
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/110 -C 20
+</command>
+<file name="log/ftpserver.cmd">
+REPLY EPSV 500 no such command
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+</strip>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+PASV
+TYPE I
+SIZE 110
+REST 20
+RETR 110
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test111

@@ -0,0 +1,37 @@
+# Server-side
+<reply>
+<size>
+85
+</size>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download resume beyond file size
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/111 -C 2000
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+36
+</errorcode>
+<strip>
+</strip>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+TYPE I
+SIZE 111
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test112

@@ -0,0 +1,41 @@
+# Server-side
+<reply>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP PASV upload resume
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/112 -T log/upload112 -C 40
+</command>
+<file name="log/upload112">
+this is the *****crap******** that we're gonna upload
+
+worx?
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+</strip>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+TYPE I
+APPE 112
+QUIT
+</protocol>
+<upload>
+ gonna upload
+
+worx?
+</upload>
+</verify>

neo/curl/tests/data/test113

@@ -0,0 +1,29 @@
+# Server-side
+<reply>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download, failed login: USER not valid
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/113
+</command>
+<file name="log/ftpserver.cmd">
+REPLY USER 314 bluah you fewl!
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+12
+</errorcode>
+<protocol>
+USER anonymous
+</protocol>
+</verify>

neo/curl/tests/data/test114

@@ -0,0 +1,30 @@
+# Server-side
+<reply>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download, failed login: PASS not valid
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/114
+</command>
+<file name="log/ftpserver.cmd">
+REPLY PASS 314 bluah you f00l!
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+11
+</errorcode>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+</protocol>
+</verify>

neo/curl/tests/data/test115

@@ -0,0 +1,35 @@
+# Server-side
+<reply>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download, failed PASV
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/115
+</command>
+<file name="log/ftpserver.cmd">
+REPLY PASV 314 bluah you f00l!
+REPLY EPSV 314 bluah you f00l!
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+13
+</errorcode>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+PASV
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test116

@@ -0,0 +1,37 @@
+# Server-side
+<reply>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download, failed PORT
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/116 -P 127.0.0.1
+</command>
+<file name="log/ftpserver.cmd">
+REPLY PORT 314 bluah you f00l!
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+30
+</errorcode>
+<strip>
+^PORT 127,0,0,1,.*
+^EPRT .*
+^LPRT .*
+</strip>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test117

@@ -0,0 +1,36 @@
+# Server-side
+<reply>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download, failed TYPE
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/117
+</command>
+<file name="log/ftpserver.cmd">
+REPLY EPSV 314 bluah you f00l!
+REPLY TYPE 314 bluah you f00l!
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+17
+</errorcode>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+PASV
+TYPE I
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test118

@@ -0,0 +1,38 @@
+# Server-side
+<reply>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download, failed RETR
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/118
+</command>
+<file name="log/ftpserver.cmd">
+REPLY RETR 314 bluah you f00l!
+REPLY EPSV 314 bluah you f00l!
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+19
+</errorcode>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+PASV
+TYPE I
+SIZE 118
+RETR 118
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test119

@@ -0,0 +1,40 @@
+# Server-side
+<reply>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download, failed RETR with PORT
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/119 -P -
+</command>
+<file name="log/ftpserver.cmd">
+REPLY RETR 314 bluah you f00l!
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+19
+</errorcode>
+<strip>
+^PORT.*
+^EPRT .*
+^LPRT .*
+</strip>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+TYPE I
+SIZE 119
+RETR 119
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test12

@@ -0,0 +1,47 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 206 Partial Content
+Date: Mon, 13 Nov 2000 13:41:09 GMT
+Server: Apache/1.3.11 (Unix) PHP/3.0.14
+Last-Modified: Tue, 13 Jun 2000 12:10:00 GMT
+ETag: "21025-dc7-39462498"
+Accept-Ranges: bytes
+Content-Length: 101
+Content-Range: bytes 100-200/3527
+Connection: close
+Content-Type: text/html
+
+ink="#ffffff" vlink="#cccccc">
+<table width=100% cellspacing=0 cellpadding=0 border=0>
+ <tr> 0123456
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP range support
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/want/12 -r 100-200
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /want/12 HTTP/1.1
+Range: bytes=100-200
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>

neo/curl/tests/data/test120

@@ -0,0 +1,43 @@
+# Server-side
+<reply>
+<data>
+data
+    to
+      see
+that FTP
+works
+  so does it?
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+ftp download with post-quote delete operation
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/120 -Q "-DELE file"
+</command>
+<file name="log/ftpserver.cmd">
+REPLY EPSV 314 bluah you f00l!
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+PASV
+TYPE I
+SIZE 120
+RETR 120
+DELE file
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test121

@@ -0,0 +1,40 @@
+# Server-side
+<reply>
+<data>
+data
+    to
+      see
+that FTP
+works
+  so does it?
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+ftp download with post- and pre-transfer delete operations
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/121 -Q "-DELE after_transfer" -Q "DELE before_transfer"
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+DELE before_transfer
+EPSV
+TYPE I
+SIZE 121
+RETR 121
+DELE after_transfer
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test122

@@ -0,0 +1,36 @@
+# Server-side
+<reply>
+<size>
+5
+</size>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download resume with whole file already downloaded
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/122 -C 5
+</command>
+<file name="log/ftpserver.cmd">
+REPLY EPSV 500 no such command
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+PASV
+TYPE I
+SIZE 122
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test123

@@ -0,0 +1,31 @@
+# Server-side
+<reply>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP upload resume with whole file already downloaded
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/123 -T log/upload123 -C 51
+</command>
+<file name="log/upload123">
+--------------------------------------------------
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+TYPE I
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test124

@@ -0,0 +1,38 @@
+# Server-side
+<reply>
+<data>
+we can still send data even if pwd fails!
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download, failed PWD
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/124
+</command>
+<file name="log/ftpserver.cmd">
+REPLY PWD 314 bluah you f00l!
+REPLY EPSV 314 bluah you f00l!
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+PASV
+TYPE I
+SIZE 124
+RETR 124
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test125

@@ -0,0 +1,33 @@
+# Server-side
+<reply>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download, failed CWD
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/path/to/file/125
+</command>
+<file name="log/ftpserver.cmd">
+REPLY CWD 314 bluah you f00l!
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+9
+</errorcode>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD path
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test126

@@ -0,0 +1,38 @@
+# Server-side
+<reply>
+<data>
+this is file contents
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download with multiple replies at once in RETR
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/blalbla/lululul/126
+</command>
+<file name="log/ftpserver.cmd">
+RETRWEIRDO
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD blalbla
+CWD lululul
+EPSV
+TYPE I
+SIZE 126
+RETR 126
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test127

@@ -0,0 +1,36 @@
+# Server-side
+<reply>
+<data>
+moooooooo
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP --disable-epsv
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/path/to/file/127 --disable-epsv
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD path
+CWD to
+CWD file
+PASV
+TYPE I
+SIZE 127
+RETR 127
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test128

@@ -0,0 +1,47 @@
+# Server-side
+<reply>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP upload with --crlf
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/128 -T log/upload128 --crlf
+</command>
+<file name="log/upload128">
+file
+with unix newlines
+meant to be
+converted
+with
+the
+--crlf option
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+TYPE I
+STOR 128
+QUIT
+</protocol>
+<upload>
+file
+with unix newlines
+meant to be
+converted
+with
+the
+--crlf option
+</upload>
+</verify>

neo/curl/tests/data/test13

@@ -0,0 +1,37 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 Read you
+Content-Length: 29
+Deleted: suppose we got a header like this! ;-)
+
+blabla custom request result
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP custom request 'DELETE'
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/want/13 -X DELETE
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+DELETE /want/13 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>

neo/curl/tests/data/test130

@@ -0,0 +1,56 @@
+#
+# Server-side
+<reply name="1">
+<data>
+total 20
+drwxr-xr-x   8 98       98           512 Oct 22 13:06 .
+drwxr-xr-x   8 98       98           512 Oct 22 13:06 ..
+drwxr-xr-x   2 98       98           512 May  2  1996 .NeXT
+-r--r--r--   1 0        1             35 Jul 16  1996 README
+lrwxrwxrwx   1 0        1              7 Dec  9  1999 bin -> usr/bin
+dr-xr-xr-x   2 0        1            512 Oct  1  1997 dev
+drwxrwxrwx   2 98       98           512 May 29 16:04 download.html
+dr-xr-xr-x   2 0        1            512 Nov 30  1995 etc
+drwxrwxrwx   2 98       1            512 Oct 30 14:33 pub
+dr-xr-xr-x   5 0        1            512 Oct  1  1997 usr
+</data>
+</reply>
+
+#
+# Client-side
+<client>
+<features>
+netrc_debug
+</features>
+<server>
+ftp
+</server>
+ <name>
+FTP (optional .netrc; no user/pass) dir list PASV
+ </name>
+ <command>
+--netrc-optional ftp://%HOSTIP:%FTPPORT/
+</command>
+<file name="log/netrc" >
+# the following two lines were created while testing curl
+machine %HOSTIP login user1 password passwd1
+machine %HOSTIP login user2 password passwd2
+</file>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+filter off really nothing
+</strip>
+<protocol>
+USER user1
+PASS passwd1
+PWD
+EPSV
+TYPE A
+LIST
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test131

@@ -0,0 +1,56 @@
+#
+# Server-side
+<reply name="1">
+<data>
+total 20
+drwxr-xr-x   8 98       98           512 Oct 22 13:06 .
+drwxr-xr-x   8 98       98           512 Oct 22 13:06 ..
+drwxr-xr-x   2 98       98           512 May  2  1996 .NeXT
+-r--r--r--   1 0        1             35 Jul 16  1996 README
+lrwxrwxrwx   1 0        1              7 Dec  9  1999 bin -> usr/bin
+dr-xr-xr-x   2 0        1            512 Oct  1  1997 dev
+drwxrwxrwx   2 98       98           512 May 29 16:04 download.html
+dr-xr-xr-x   2 0        1            512 Nov 30  1995 etc
+drwxrwxrwx   2 98       1            512 Oct 30 14:33 pub
+dr-xr-xr-x   5 0        1            512 Oct  1  1997 usr
+</data>
+</reply>
+
+#
+# Client-side
+<client>
+<features>
+netrc_debug
+</features>
+<server>
+ftp
+</server>
+ <name>
+FTP (optional .netrc; user/no pass) dir list PASV
+ </name>
+ <command>
+--netrc-optional ftp://user2@%HOSTIP:%FTPPORT/
+</command>
+<file name="log/netrc" >
+# the following two lines were created while testing curl
+machine %HOSTIP login user1 password passwd1
+machine %HOSTIP login user2 password passwd2
+</file>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+filter off really nothing
+</strip>
+<protocol>
+USER user2
+PASS passwd2
+PWD
+EPSV
+TYPE A
+LIST
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test132

@@ -0,0 +1,56 @@
+#
+# Server-side
+<reply name="1">
+<data>
+total 20
+drwxr-xr-x   8 98       98           512 Oct 22 13:06 .
+drwxr-xr-x   8 98       98           512 Oct 22 13:06 ..
+drwxr-xr-x   2 98       98           512 May  2  1996 .NeXT
+-r--r--r--   1 0        1             35 Jul 16  1996 README
+lrwxrwxrwx   1 0        1              7 Dec  9  1999 bin -> usr/bin
+dr-xr-xr-x   2 0        1            512 Oct  1  1997 dev
+drwxrwxrwx   2 98       98           512 May 29 16:04 download.html
+dr-xr-xr-x   2 0        1            512 Nov 30  1995 etc
+drwxrwxrwx   2 98       1            512 Oct 30 14:33 pub
+dr-xr-xr-x   5 0        1            512 Oct  1  1997 usr
+</data>
+</reply>
+
+#
+# Client-side
+<client>
+<features>
+netrc_debug
+</features>
+<server>
+ftp
+</server>
+ <name>
+FTP (optional .netrc; user/passwd supplied) dir list PASV
+ </name>
+ <command>
+--netrc-optional ftp://mary:mark@%HOSTIP:%FTPPORT/
+</command>
+<file name="log/netrc" >
+# the following two lines were created while testing curl
+machine %HOSTIP login user1 password passwd1
+machine %HOSTIP login user2 password passwd2
+</file>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+filter off really nothing
+</strip>
+<protocol>
+USER mary
+PASS mark
+PWD
+EPSV
+TYPE A
+LIST
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test133

@@ -0,0 +1,56 @@
+#
+# Server-side
+<reply name="1">
+<data>
+total 20
+drwxr-xr-x   8 98       98           512 Oct 22 13:06 .
+drwxr-xr-x   8 98       98           512 Oct 22 13:06 ..
+drwxr-xr-x   2 98       98           512 May  2  1996 .NeXT
+-r--r--r--   1 0        1             35 Jul 16  1996 README
+lrwxrwxrwx   1 0        1              7 Dec  9  1999 bin -> usr/bin
+dr-xr-xr-x   2 0        1            512 Oct  1  1997 dev
+drwxrwxrwx   2 98       98           512 May 29 16:04 download.html
+dr-xr-xr-x   2 0        1            512 Nov 30  1995 etc
+drwxrwxrwx   2 98       1            512 Oct 30 14:33 pub
+dr-xr-xr-x   5 0        1            512 Oct  1  1997 usr
+</data>
+</reply>
+
+#
+# Client-side
+<client>
+<features>
+netrc_debug
+</features>
+<server>
+ftp
+</server>
+ <name>
+FTP (compulsory .netrc; ignored user/passwd) dir list PASV
+ </name>
+ <command>
+-n ftp://mary:mark@%HOSTIP:%FTPPORT/
+</command>
+<file name="log/netrc" >
+# the following two lines were created while testing curl
+machine %HOSTIP login user1 password passwd1
+machine %HOSTIP login user2 password passwd2
+</file>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+filter off really nothing
+</strip>
+<protocol>
+USER user1
+PASS passwd1
+PWD
+EPSV
+TYPE A
+LIST
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test134

@@ -0,0 +1,56 @@
+#
+# Server-side
+<reply name="1">
+<data>
+total 20
+drwxr-xr-x   8 98       98           512 Oct 22 13:06 .
+drwxr-xr-x   8 98       98           512 Oct 22 13:06 ..
+drwxr-xr-x   2 98       98           512 May  2  1996 .NeXT
+-r--r--r--   1 0        1             35 Jul 16  1996 README
+lrwxrwxrwx   1 0        1              7 Dec  9  1999 bin -> usr/bin
+dr-xr-xr-x   2 0        1            512 Oct  1  1997 dev
+drwxrwxrwx   2 98       98           512 May 29 16:04 download.html
+dr-xr-xr-x   2 0        1            512 Nov 30  1995 etc
+drwxrwxrwx   2 98       1            512 Oct 30 14:33 pub
+dr-xr-xr-x   5 0        1            512 Oct  1  1997 usr
+</data>
+</reply>
+
+#
+# Client-side
+<client>
+<features>
+netrc_debug
+</features>
+<server>
+ftp
+</server>
+ <name>
+FTP (optional .netrc; programmatic user/passwd) dir list PASV
+ </name>
+ <command>
+--netrc-optional -u romulus:rhemus ftp://mary:mark@%HOSTIP:%FTPPORT/
+</command>
+<file name="log/netrc" >
+# the following two lines were created while testing curl
+machine %HOSTIP login user1 password passwd1
+machine %HOSTIP login user2 password passwd2
+</file>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+filter off really nothing
+</strip>
+<protocol>
+USER romulus
+PASS rhemus
+PWD
+EPSV
+TYPE A
+LIST
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test135

@@ -0,0 +1,43 @@
+# Server-side
+<reply>
+<data>
+0123456789abcdef
+0123456789abcdef
+0123456789abcdef
+0123456789abcdef
+</data>
+<datacheck nonewline=yes>
+0123456789abc
+</datacheck>
+<size>
+64
+</size>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP retrieve a byte-range
+ </name>
+ <command>
+-r 4-16 ftp://%HOSTIP:%FTPPORT/135
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+EPSV
+TYPE I
+SIZE 135
+REST 4
+RETR 135
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test136

@@ -0,0 +1,33 @@
+# Server-side
+<reply>
+<data>
+0123456789abcdef
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP with user and no password
+ </name>
+ <command>
+-u user: ftp://%HOSTIP:%FTPPORT/136
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER user
+PASS 
+PWD
+EPSV
+TYPE I
+SIZE 136
+RETR 136
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test137

@@ -0,0 +1,38 @@
+# Server-side
+<reply>
+<data>
+this is file contents
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download without size in RETR string
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/blalbla/lululul/137
+</command>
+<file name="log/ftpserver.cmd">
+RETRNOSIZE
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD blalbla
+CWD lululul
+EPSV
+TYPE I
+SIZE 137
+RETR 137
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test138

@@ -0,0 +1,41 @@
+# Server-side
+<reply>
+<data>
+this is file contents
+</data>
+<size>
+-1
+</size>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download without size in RETR string and no SIZE command
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/blalbla/lululul/138
+</command>
+<file name="log/ftpserver.cmd">
+RETRNOSIZE
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD blalbla
+CWD lululul
+EPSV
+TYPE I
+SIZE 138
+RETR 138
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test139

@@ -0,0 +1,38 @@
+# Server-side
+<reply>
+<data>
+this is file contents
+</data>
+<mdtm>
+213 20030409102659
+</mdtm>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download a newer file with -z
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/blalbla/139 -z "1 jan 1989"
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD blalbla
+MDTM 139
+EPSV
+TYPE I
+SIZE 139
+RETR 139
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test14

@@ -0,0 +1,37 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 OK
+Server: thebest/1.0
+Connection: close
+
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP HEAD with Connection: close
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/want/14 -i --head
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+HEAD /want/14 HTTP/1.1
+User-Agent: curl/7.4.2-pre4 (sparc-sun-solaris2.7) libcurl 7.4.2-pre4
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>

neo/curl/tests/data/test140

@@ -0,0 +1,33 @@
+# Server-side
+<reply>
+<data>
+</data>
+<mdtm>
+213 20030409102659
+</mdtm>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download file with -z, expected to not transfer
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/blalbla/140 -z "1 jan 2004"
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD blalbla
+MDTM 140
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test141

@@ -0,0 +1,39 @@
+# Server-side
+<reply>
+<data>
+</data>
+<mdtm>
+213 20030409102659
+</mdtm>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP download info with -I
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/blalbla/141 -I
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD blalbla
+MDTM 141
+TYPE I
+SIZE 141
+REST 0
+QUIT
+</protocol>
+<stdout>
+Last-Modified: Wed, 09 Apr 2003 10:26:59 GMT
+</stdout>
+</verify>

neo/curl/tests/data/test142

@@ -0,0 +1,30 @@
+# Server-side
+<reply>
+<data>
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP URL with too deep (100+) dir hierarchy
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/a/b
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+3
+</errorcode>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+</protocol>
+</verify>

neo/curl/tests/data/test143

@@ -0,0 +1,35 @@
+# Server-side
+<reply>
+<data>
+bla bla bla
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP URL with type=a
+ </name>
+ <command>
+"ftp://%HOSTIP:%FTPPORT/%2ftmp/moo/143;type=a"
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD /tmp
+CWD moo
+EPSV
+TYPE A
+SIZE 143
+RETR 143
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test144

@@ -0,0 +1,40 @@
+# Server-side
+<reply>
+<data>
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP NLST dir list without contents, using PORT
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/ -P - -l
+</command>
+<file name="log/ftpserver.cmd">
+REPLY NLST 450 No files found
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+# strip all kinds of PORT, EPRT and LPRT curl can do
+<strip>
+^PORT 127,0,0,1,.*
+^EPRT.*
+^LPRT.*
+</strip>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+PORT 127,0,0,1,243,212
+TYPE A
+NLST
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test145

@@ -0,0 +1,43 @@
+# Server-side
+<reply>
+<data>
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP NLST dir list with weird reply code, using PORT
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/ -P - -l
+</command>
+<file name="log/ftpserver.cmd">
+REPLY NLST 550 Have a taste on this!
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+19
+</errorcode>
+# strip all kinds of PORT, EPRT and LPRT curl can do
+<strip>
+^PORT 127,0,0,1,.*
+^EPRT.*
+^LPRT.*
+</strip>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+PORT 127,0,0,1,243,212
+TYPE A
+NLST
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test146

@@ -0,0 +1,47 @@
+# Server-side
+<reply>
+<data>
+this is file contents
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+persistant FTP with different paths
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/first/dir/here/146 ftp://%HOSTIP:%FTPPORT/146
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+# strip all kinds of PORT, EPRT and LPRT curl can do
+<strip>
+^PORT 127,0,0,1,.*
+^EPRT.*
+^LPRT.*
+</strip>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD first
+CWD dir
+CWD here
+EPSV
+TYPE I
+SIZE 146
+RETR 146
+CWD /nowhere/anywhere
+EPSV
+TYPE I
+SIZE 146
+RETR 146
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test147

@@ -0,0 +1,49 @@
+# Server-side
+<reply>
+<data>
+foo
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP with --ftp-create-dirs (failing CWD)
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/first/dir/here/147 --ftp-create-dirs
+</command>
+</test>
+<file name="log/ftpserver.cmd">
+REPLY CWD 550 I won't allow this on my server
+COUNT CWD 1
+</file>
+</client>
+
+# Verify data after the test has been "shot"
+<verify>
+# strip all kinds of PORT, EPRT and LPRT curl can do
+<strip>
+^PORT 127,0,0,1,.*
+^EPRT.*
+^LPRT.*
+</strip>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD first
+MKD first
+CWD first
+CWD dir
+CWD here
+EPSV
+TYPE I
+SIZE 147
+RETR 147
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test148

@@ -0,0 +1,42 @@
+# Server-side
+<reply>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP with --ftp-create-dirs (failing MKD)
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/attempt/to/get/this/148 --ftp-create-dirs
+</command>
+</test>
+<file name="log/ftpserver.cmd">
+REPLY CWD 550 I won't allow this on my server
+REPLY MKD 550 We will have no such thing
+</file>
+</client>
+
+# Verify data after the test has been "shot"
+<verify>
+# strip all kinds of PORT, EPRT and LPRT curl can do
+<strip>
+^PORT 127,0,0,1,.*
+^EPRT.*
+^LPRT.*
+</strip>
+<errorcode>
+9
+</errorcode>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD attempt
+MKD attempt
+QUIT
+</protocol>
+</verify>

neo/curl/tests/data/test149

@@ -0,0 +1,47 @@
+# Server-side
+<reply>
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+ <name>
+FTP with multiple uploads
+ </name>
+ <command>
+-T log/upload148 ftp://%HOSTIP:%FTPPORT/dir1/148 -T log/upload148 ftp://%HOSTIP:%FTPPORT/dir2/148
+</command>
+<file name="log/upload148">
+send away this contents
+</file>
+</client>
+
+# Verify data after the test has been "shot"
+<verify>
+# strip all kinds of PORT, EPRT and LPRT curl can do
+<strip>
+^PORT 127,0,0,1,.*
+^EPRT.*
+^LPRT.*
+</strip>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD dir1
+EPSV
+TYPE I
+STOR 148
+CWD /nowhere/anywhere
+CWD dir2
+EPSV
+TYPE I
+STOR 148
+QUIT
+</protocol>
+<file name="log/upload148">
+send away this contents
+</file>
+</verify>

neo/curl/tests/data/test15

@@ -0,0 +1,49 @@
+# Server-side
+<reply>
+<data nocheck=true>
+HTTP/1.4 200 OK
+Fake: yes
+Fake: yes
+Fake: yes
+Content-Length: 26
+
+Repeated nonsense-headers
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+--write-out test
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/want/15 --write-out '%{url_effective} %{http_code} %{size_download}\n'
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<stdout>
+HTTP/1.4 200 OK
+Fake: yes
+Fake: yes
+Fake: yes
+Content-Length: 26
+
+Repeated nonsense-headers
+http://127.0.0.1:8999/want/15 200 26
+</stdout>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /want/15 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>

neo/curl/tests/data/test16

@@ -0,0 +1,41 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 OK
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+Content-Type: text/html
+Funny-head: yesyes
+Content-Length: 22
+
+the content goes here
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP with proxy athorization
+ </name>
+ <command>
+ -U fake@user:§§§looooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooong -x %HOSTIP:%HOSTPORT http://we.want.that.site.com/16
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET http://we.want.that.site.com/16 HTTP/1.1
+Proxy-authorization: Basic ZmFrZUB1c2VyOqenp2xvb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29vb29uZw==
+Host: we.want.that.site.com
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>

neo/curl/tests/data/test17

@@ -0,0 +1,46 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 OK
+Funny-head: yesyes
+Content-Length: 27
+
+This is the proof it works
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP with config file on stdin
+ </name>
+ <stdin>
+#
+# Use a silly request without '--':
+request MOOO
+#
+# Set the user-agent using a short-option:
+-A "agent007 license to drill\t"
+#
+# long option *with* '--':
+--max-time 180
+ </stdin>
+ <command>
+-K - %HOSTIP:%HOSTPORT/that.site.com/17
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<protocol>
+MOOO /that.site.com/17 HTTP/1.1
+User-Agent: agent007 license to drill	
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>

neo/curl/tests/data/test18

@@ -0,0 +1,84 @@
+# Server-side
+<reply>
+<data nocheck=1>
+HTTP/1.1 200 OK
+Funny-head: yesyes
+Content-Length: 4
+
+moo
+</data>
+<data2>
+HTTP/1.1 200 OK
+Funny-head: yesyes
+Content-Length: 4
+
+foo
+</data2>
+<data3>
+HTTP/1.1 200 OK
+Funny-head: yesyes
+Content-Length: 4
+
+hoo
+</data3>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+multiple requests using {} in URL
+ </name>
+ <command>
+'%HOSTIP:%HOSTPORT/{18,180002,180003}'
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /18 HTTP/1.1
+User-Agent: curl/7.8.1-pre3 (sparc-sun-solaris2.7) libcurl 7.8.1-pre3 (OpenSSL 0.9.6a) (krb4 enabled)
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+GET /180002 HTTP/1.1
+User-Agent: curl/7.8.1-pre3 (sparc-sun-solaris2.7) libcurl 7.8.1-pre3 (OpenSSL 0.9.6a) (krb4 enabled)
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+GET /180003 HTTP/1.1
+User-Agent: curl/7.8.1-pre3 (sparc-sun-solaris2.7) libcurl 7.8.1-pre3 (OpenSSL 0.9.6a) (krb4 enabled)
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+<stdout>
+--_curl_--127.0.0.1:8999/18
+HTTP/1.1 200 OK
+Funny-head: yesyes
+Content-Length: 4
+
+moo
+--_curl_--127.0.0.1:8999/180002
+HTTP/1.1 200 OK
+Funny-head: yesyes
+Content-Length: 4
+
+foo
+--_curl_--127.0.0.1:8999/180003
+HTTP/1.1 200 OK
+Funny-head: yesyes
+Content-Length: 4
+
+hoo
+</stdout>
+</verify>

neo/curl/tests/data/test19

@@ -0,0 +1,25 @@
+# Server-side
+<reply>
+<data>
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+none
+</server>
+ <name>
+attempt connect to non-listening socket
+ </name>
+ <command>
+%HOSTIP:60000
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+7
+</errorcode>
+</verify>

neo/curl/tests/data/test190

@@ -0,0 +1,36 @@
+# Server-side
+<reply>
+moooooooo
+</reply>
+
+# Client-side
+<client>
+<server>
+ftp
+</server>
+<killserver>
+ftp
+</killserver>
+ <name>
+FTP download with strict timeout and slow CWD
+ </name>
+ <command>
+ftp://%HOSTIP:%FTPPORT/path/to/file/126 -m 3
+</command>
+<file name="log/ftpserver.cmd">
+DELAY CWD 15
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+28
+</errorcode>
+<protocol>
+USER anonymous
+PASS curl_by_daniel@haxx.se
+PWD
+CWD path
+</protocol>
+</verify>

neo/curl/tests/data/test2

@@ -0,0 +1,45 @@
+#
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 OK
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake swsclose
+Content-Type: text/html
+Funny-head: yesyes
+
+</data>
+</reply>
+
+#
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP GET with user and password
+ </name>
+ <command>
+ -u fake:user http://%HOSTIP:%HOSTPORT/2
+</command>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /2 HTTP/1.1
+Authorization: Basic ZmFrZTp1c2Vy
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+<data>
+[insert full protocol verifiction dump here]
+</data>
+</verify>

neo/curl/tests/data/test20

@@ -0,0 +1,25 @@
+# Server-side
+<reply>
+<data>
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+attempt connect to non-existing host name
+ </name>
+ <command>
+non-existing-and-weeeeeeirdname
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+6
+</errorcode>
+</verify>

neo/curl/tests/data/test200

@@ -0,0 +1,34 @@
+# Server-side
+<reply>
+<data>
+foo
+   bar
+bar
+   foo
+moo
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+none
+</server>
+ <name>
+basic file:// file
+ </name>
+ <command>
+file://localhost/%PWD/log/test200.txt
+</command>
+<file name="log/test200.txt">
+foo
+   bar
+bar
+   foo
+moo
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+</verify>

neo/curl/tests/data/test201

@@ -0,0 +1,25 @@
+# Server-side
+<reply>
+<data>
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+none
+</server>
+ <name>
+missing file:// file
+ </name>
+ <command>
+file://localhost/%PWD/log/non-existant-file.txt
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+37
+</errorcode>
+</verify>

neo/curl/tests/data/test202

@@ -0,0 +1,29 @@
+# Server-side
+<reply>
+<data>
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+none
+</server>
+ <name>
+two file:// URLs to stdout
+ </name>
+ <command>
+file://localhost/%PWD/log/test202.txt file://localhost/%PWD/log/test202.txt
+</command>
+<file name="log/test202.txt">
+contents in a single file
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<stdout>
+contents in a single file
+contents in a single file
+</stdout>
+</verify>

neo/curl/tests/data/test203

@@ -0,0 +1,34 @@
+# Server-side
+<reply>
+<data>
+foo
+   bar
+bar
+   foo
+moo
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+none
+</server>
+ <name>
+file:/path URL with a single slash
+ </name>
+ <command>
+file:%PWD/log/test203.txt
+</command>
+<file name="log/test203.txt">
+foo
+   bar
+bar
+   foo
+moo
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+</verify>

neo/curl/tests/data/test21

@@ -0,0 +1,25 @@
+# Server-side
+<reply>
+<data>
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+use curl with multiple request methods
+ </name>
+ <command>
+-I -d FOOO -F moo=moo localhost
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+2
+</errorcode>
+</verify>

neo/curl/tests/data/test23

@@ -0,0 +1,25 @@
+# Server-side
+<reply>
+<data>
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+unsupported protocol:// URL
+ </name>
+ <command>
+htfp://%HOSTIP:%HOSTPORT/none.htfml
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+1
+</errorcode>
+</verify>

neo/curl/tests/data/test24

@@ -0,0 +1,40 @@
+# Server-side
+<reply>
+<data nocheck=1>
+HTTP/1.0 404 BAD BOY
+Content-Type: text/html
+
+This silly page doesn't reaaaaaly exist so you should not get it.
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP GET fail silently on HTTP error return
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/24 --fail
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent: curl/.*
+</strip>
+<protocol>
+GET /24 HTTP/1.1
+User-Agent: curl/7.8.1-pre3 (sparc-sun-solaris2.7) libcurl 7.8.1-pre3 (OpenSSL 0.9.6a) (krb4 enabled)
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+<errorcode>
+22
+</errorcode>
+</verify>

neo/curl/tests/data/test25

@@ -0,0 +1,112 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 301 This is a weirdo text message
+Server: test-server/fake
+Location: data/reply/25
+Content-Length: 32
+Connection: close
+
+Redirect to the same URL again!
+</data>
+<datacheck>
+HTTP/1.1 301 This is a weirdo text message
+Server: test-server/fake
+Location: data/reply/25
+Content-Length: 32
+Connection: close
+
+HTTP/1.1 301 This is a weirdo text message
+Server: test-server/fake
+Location: data/reply/25
+Content-Length: 32
+Connection: close
+
+HTTP/1.1 301 This is a weirdo text message
+Server: test-server/fake
+Location: data/reply/25
+Content-Length: 32
+Connection: close
+
+HTTP/1.1 301 This is a weirdo text message
+Server: test-server/fake
+Location: data/reply/25
+Content-Length: 32
+Connection: close
+
+HTTP/1.1 301 This is a weirdo text message
+Server: test-server/fake
+Location: data/reply/25
+Content-Length: 32
+Connection: close
+
+HTTP/1.1 301 This is a weirdo text message
+Server: test-server/fake
+Location: data/reply/25
+Content-Length: 32
+Connection: close
+
+</datacheck>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+looping HTTP Location: following with --max-redirs, no persistance
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/want/25 -L --max-redirs 5
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent: curl/.*
+</strip>
+<protocol>
+GET /want/25 HTTP/1.1
+User-Agent: curl/7.8.1-pre3 (sparc-sun-solaris2.7) libcurl 7.8.1-pre3 (OpenSSL 0.9.6a) (krb4 enabled)
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+GET /want/data/reply/25 HTTP/1.1
+User-Agent: curl/7.8.1-pre3 (sparc-sun-solaris2.7) libcurl 7.8.1-pre3 (OpenSSL 0.9.6a) (krb4 enabled)
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+GET /want/data/reply/data/reply/25 HTTP/1.1
+User-Agent: curl/7.8.1-pre3 (sparc-sun-solaris2.7) libcurl 7.8.1-pre3 (OpenSSL 0.9.6a) (krb4 enabled)
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+GET /want/data/reply/data/reply/data/reply/25 HTTP/1.1
+User-Agent: curl/7.8.1-pre3 (sparc-sun-solaris2.7) libcurl 7.8.1-pre3 (OpenSSL 0.9.6a) (krb4 enabled)
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+GET /want/data/reply/data/reply/data/reply/data/reply/25 HTTP/1.1
+User-Agent: curl/7.8.1-pre3 (sparc-sun-solaris2.7) libcurl 7.8.1-pre3 (OpenSSL 0.9.6a) (krb4 enabled)
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+GET /want/data/reply/data/reply/data/reply/data/reply/data/reply/25 HTTP/1.1
+User-Agent: curl/7.8.1-pre3 (sparc-sun-solaris2.7) libcurl 7.8.1-pre3 (OpenSSL 0.9.6a) (krb4 enabled)
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+
+<errorcode>
+47
+</errorcode>
+</verify>

neo/curl/tests/data/test26

@@ -0,0 +1,38 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 Mooo swsclose
+Server: test-server/fake
+Connection: close
+
+*flopp*
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+specify more -o than URLs
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/want/26 -o - -o -
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent: curl.*
+</strip>
+<protocol>
+GET /want/26 HTTP/1.1
+User-Agent: curl/7.8.1-pre3 (sparc-sun-solaris2.7) libcurl 7.8.1-pre3 (OpenSSL 0.9.6a) (krb4 enabled)
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>

neo/curl/tests/data/test27

@@ -0,0 +1,49 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 Mooo swsclose
+Connection: close
+Set-Cookie: path=/; thewinneris=nowayyouwin;
+
+*flopp*
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+Get same cookie page several times
+ </name>
+ <command>
+'http://%HOSTIP:%HOSTPORT/want/{27,27,27}' -b none
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent: curl.*
+</strip>
+<protocol>
+GET /want/27 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+GET /want/27 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+Cookie: thewinneris=nowayyouwin
+
+GET /want/27 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+Cookie: thewinneris=nowayyouwin
+
+</protocol>
+</verify>

neo/curl/tests/data/test28

@@ -0,0 +1,67 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 301 This is a weirdo text message swsclose
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+Location:  /online/1,1795,Welcome,00.html/280002.txt?logout=TRUE
+Connection: close
+
+This server reply is for testing a simple Location: following
+
+</data>
+<data2>
+HTTP/1.1 200 Followed here fine swsclose
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+
+If this is received, the location following worked
+
+</data2>
+<datacheck>
+HTTP/1.1 301 This is a weirdo text message swsclose
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+Location:  /online/1,1795,Welcome,00.html/280002.txt?logout=TRUE
+Connection: close
+
+HTTP/1.1 200 Followed here fine swsclose
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+
+If this is received, the location following worked
+
+</datacheck>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP Location: following with extra spaces in header
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/want/28 -L
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /want/28 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+GET /online/1,1795,Welcome,00.html/280002.txt?logout=TRUE HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>

neo/curl/tests/data/test29

@@ -0,0 +1,43 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 OK swsclose
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Connection: close
+
+<html>result</html>
+</data>
+<postcmd>
+wait 10
+</postcmd>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP with 2 secs timeout
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/want/29 -m 2
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /want/29 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+<errorcode>
+28
+</errorcode>
+</verify>

neo/curl/tests/data/test3

@@ -0,0 +1,52 @@
+#
+# Server-side
+<reply name="1">
+<data>
+HTTP/1.0 200 OK
+Server: test-server/fake
+Content-Type: text/html
+Content-Length: 0
+
+this is data even though Content-Length is set to zero
+</data>
+<datacheck>
+HTTP/1.0 200 OK
+Server: test-server/fake
+Content-Type: text/html
+Content-Length: 0
+
+</datacheck>
+</reply>
+
+#
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP POST with auth and contents but with content-length set to 0
+ </name>
+ <command>
+ -d "fooo=mooo&pooo=clue&doo=%20%20%20++++" -u "fake:-user" http://%HOSTIP:%HOSTPORT/3
+</command>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol nonewline=yes>
+POST /3 HTTP/1.1
+Authorization: Basic ZmFrZTotdXNlcg==
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+Content-Length: 37
+Content-Type: application/x-www-form-urlencoded
+
+fooo=mooo&pooo=clue&doo=%20%20%20++++
+</protocol>
+</verify>

neo/curl/tests/data/test30

@@ -0,0 +1,35 @@
+# Server-side
+<reply>
+<data>
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP with no data in server reply
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/want/30
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /want/30 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+<errorcode>
+52
+</errorcode>
+</verify>

neo/curl/tests/data/test300

@@ -0,0 +1,41 @@
+#
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 OK
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+Content-Length: 7
+
+MooMoo
+</data>
+</reply>
+
+#
+# Client-side
+<client>
+<server>
+https
+</server>
+ <name>
+simple HTTPS GET
+ </name>
+ <command>
+-k https://%HOSTIP:%HTTPSPORT/300
+</command>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /300 HTTP/1.1
+Host: 127.0.0.1:8433
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>

neo/curl/tests/data/test301

@@ -0,0 +1,45 @@
+#
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 OK swsclose
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+Content-Type: text/html
+Funny-head: yesyes
+
+</data>
+</reply>
+
+#
+# Client-side
+<client>
+<server>
+https
+</server>
+ <name>
+HTTPS GET with user and password
+ </name>
+ <command>
+-k -u fake:user https://%HOSTIP:%HTTPSPORT/301
+</command>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /301 HTTP/1.1
+Authorization: Basic ZmFrZTp1c2Vy
+Host: 127.0.0.1:8433
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+<data>
+[insert full protocol verifiction dump here]
+</data>
+</verify>

neo/curl/tests/data/test302

@@ -0,0 +1,35 @@
+#
+# Server-side
+<reply>
+MOOOOO
+</reply>
+
+#
+# Client-side
+<client>
+<server>
+https
+</server>
+ <name>
+HTTPS GET over HTTP proxy fails
+ </name>
+ <command>
+-k -U fake:user -x %HOSTIP:%HOSTPORT https://bad.fakeurl-to.test/slash/302
+</command>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+56
+</errorcode>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+</protocol>
+<data>
+[insert full protocol verifiction dump here]
+</data>
+</verify>

neo/curl/tests/data/test303

@@ -0,0 +1,43 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 OK
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Connection: close
+
+<html>result</html>
+</data>
+<postcmd>
+wait 10
+</postcmd>
+</reply>
+
+# Client-side
+<client>
+<server>
+https
+</server>
+ <name>
+HTTPS with 2 secs timeout
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/want/303 -m 2
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /want/303 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+<errorcode>
+28
+</errorcode>
+</verify>

neo/curl/tests/data/test304

@@ -0,0 +1,61 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 OK
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+Content-Length: 10
+
+blablabla
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+https
+</server>
+ <name>
+HTTPS multipart formpost
+ </name>
+ <command>
+-k https://%HOSTIP:%HTTPSPORT/we/want/304 -F name=daniel -F tool=curl -F file=@log/test304.txt
+</command>
+# We create this file before the command is invoked!
+<file name="log/test304.txt">
+aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^(User-Agent:|Content-Type: multipart/form-data;|------).*
+</strip>
+<protocol>
+POST /we/want/304 HTTP/1.1
+User-Agent: curl/7.10.4 (i686-pc-linux-gnu) libcurl/7.10.4 OpenSSL/0.9.7a ipv6 zlib/1.1.3
+Host: 127.0.0.1:8433
+Pragma: no-cache
+Accept: */*
+Content-Length: 1390
+Expect: 100-continue
+Content-Type: multipart/form-data; boundary=----------------------------c3b2ef7f0bb8
+
+------------------------------c3b2ef7f0bb8
+Content-Disposition: form-data; name="name"
+
+daniel
+------------------------------c3b2ef7f0bb8
+Content-Disposition: form-data; name="tool"
+
+curl
+------------------------------c3b2ef7f0bb8
+Content-Disposition: form-data; name="file"; filename="log/test304.txt"
+Content-Type: text/plain
+
+aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
+
+------------------------------c3b2ef7f0bb8--
+</protocol>
+</verify>

neo/curl/tests/data/test305

@@ -0,0 +1,30 @@
+# Server-side
+<reply>
+<data>
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+https
+</server>
+ <name>
+insecure HTTPS without permission
+ </name>
+ <command>
+https://%HOSTIP:%HOSTPORT/want/305 --cacert moooo
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+</protocol>
+<errorcode>
+60
+</errorcode>
+</verify>

neo/curl/tests/data/test306

@@ -0,0 +1,54 @@
+#
+# Server-side
+<reply>
+<data>
+No headers at all, just data swsclose
+
+Let's get
+
+a little
+
+so that
+
+we
+
+have
+
+some
+
+test
+
+data to
+
+verify
+</data>
+</reply>
+
+#
+# Client-side
+<client>
+<server>
+https
+</server>
+ <name>
+HTTPS GET, receive no headers only data!
+ </name>
+ <command>
+-k https://%HOSTIP:%HTTPSPORT/306
+</command>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /306 HTTP/1.1
+Host: 127.0.0.1:8433
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>

neo/curl/tests/data/test31

@@ -0,0 +1,59 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 OK
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+Content-Length: 4
+Content-Type: text/html
+Funny-head: yesyes
+Set-Cookie: foobar=name; domain=anything.com; path=/ ; secure
+Set-Cookie:ismatch=this  ; domain=127.0.0.1; path=/silly/
+Set-Cookie: partmatch=present; domain=127.0.0.1 ; path=/;
+Set-Cookie:eat=this; domain=moo.foo.moo;
+Set-Cookie: eat=this-too; domain=.foo.moo;
+Set-Cookie: nodomainnovalue
+Set-Cookie:   nodomain=value; expires=Tue Feb 1 11:56:27 MET 2014
+Set-Cookie: novalue; domain=reallysilly
+Set-Cookie: test=yes; domain=foo.com; expires=Tue Feb 1 11:56:27 MET 2007
+Set-Cookie: test2=yes; domain=se; expires=Tue Feb 1 11:56:27 MET 2007
+
+boo
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP with weirdly formatted cookies and cookiejar storage
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/we/want/31 -b none -c log/jar31.txt
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /we/want/31 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+<file name="log/jar31.txt">
+# Netscape HTTP Cookie File
+# http://www.netscape.com/newsref/std/cookie_spec.html
+# This file was generated by libcurl! Edit at your own risk.
+
+.127.0.0.1	TRUE	/silly/	FALSE	0	ismatch	this
+.127.0.0.1	TRUE	/	FALSE	0	partmatch	present
+127.0.0.1	FALSE	/we/want/	FALSE	1391252187	nodomain	value
+</file>
+</verify>

neo/curl/tests/data/test32

@@ -0,0 +1,48 @@
+#
+# Server-side
+<reply name="1">
+<data>
+HTTP/1.1 200 OK
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+Last-Modified: Tue, 13 Jun 2000 12:10:00 GMT
+ETag: "21025-dc7-39462498"
+Accept-Ranges: bytes
+Content-Length: 6
+Connection: close
+Content-Type: text/html
+Funny-head: yesyes
+
+<foo>
+</data>
+</reply>
+
+#
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP with -d and -G
+ </name>
+ <command>
+-d "foo=moo&moo=poo" http://%HOSTIP:%HOSTPORT/32 -G
+</command>
+</client>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /32?foo=moo&moo=poo HTTP/1.1
+User-Agent: curl/7.9.5 (i686-pc-linux-gnu) libcurl 7.9.5-cvs (OpenSSL 0.9.5) (ipv6 enabled)
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>

neo/curl/tests/data/test33

@@ -0,0 +1,55 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 OK swsclose
+
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP PUT with resume
+ </name>
+<file name="log/test33.txt">
+012345678
+012345678
+012345678
+012345678
+012345678
+012345678
+012345678
+012345678
+012345678
+012345678
+</file>
+ <command>
+http://%HOSTIP:%HOSTPORT/33 -Tlog/test33.txt -C 50
+</command>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+PUT /33 HTTP/1.1
+Content-Range: bytes 50-99/100
+User-Agent: curl/7.6 (sparc-sun-solaris2.7) libcurl 7.6-pre4 (SSL 0.9.6) (krb4 enabled)
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+Content-Length: 50
+Expect: 100-continue
+
+012345678
+012345678
+012345678
+012345678
+012345678
+</protocol>
+</verify>

neo/curl/tests/data/test34

@@ -0,0 +1,58 @@
+#
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 funky chunky!
+Server: fakeit/0.9 fakeitbad/1.0
+Transfer-Encoding: chunked
+Connection: mooo
+
+40
+aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
+30
+bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
+21;heresatest=moooo
+cccccccccccccccccccccccccccccccc
+
+0
+muuu
+</data>
+<datacheck>
+HTTP/1.1 200 funky chunky!
+Server: fakeit/0.9 fakeitbad/1.0
+Transfer-Encoding: chunked
+Connection: mooo
+
+aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaabbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbcccccccccccccccccccccccccccccccc
+</datacheck>
+</reply>
+
+#
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP GET with chunked Transfer-Encoding
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/34
+</command>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /34 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>
+

neo/curl/tests/data/test36

@@ -0,0 +1,57 @@
+#
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 funky chunky!
+Server: fakeit/0.9 fakeitbad/1.0
+Transfer-Encoding: chunked
+Connection: mooo
+
+2
+a
+
+ILLEGAL
+bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
+</data>
+<datacheck>
+HTTP/1.1 200 funky chunky!
+Server: fakeit/0.9 fakeitbad/1.0
+Transfer-Encoding: chunked
+Connection: mooo
+
+a
+</datacheck>
+</reply>
+
+#
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP GET with bad chunked Transfer-Encoding
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/36
+</command>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+56
+</errocode>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /36 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>
+

neo/curl/tests/data/test37

@@ -0,0 +1,39 @@
+#
+# Server-side
+<reply>
+<data>
+</data>
+</reply>
+
+#
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP GET with nothing returned from server
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/37
+</command>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+52
+</errocode>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /37 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+</verify>
+

neo/curl/tests/data/test38

@@ -0,0 +1,52 @@
+# Server-side
+<reply>
+<data nocheck=1>
+HTTP/1.0 200 Mooo
+Date: Mon, 13 Nov 2000 13:41:09 GMT
+Server: myown/1.0
+Connection: close
+
+todelooooo lalalala yada yada, we know nothing about ranges ;-)
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP resume request without server supporting it
+ </name>
+ <command option="no-output">
+http://%HOSTIP:%HOSTPORT/want/38 -C - -i -o log/fewl.txt
+</command>
+<file name="log/fewl.txt">
+This text is here to simulate a partly downloaded file to resume
+download on.
+</file>
+</client>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+33
+</errorcode>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /want/38 HTTP/1.1
+Range: bytes=78-
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+
+</protocol>
+
+# the download target file must remain untouched
+<file name="log/fewl.txt">
+This text is here to simulate a partly downloaded file to resume
+download on.
+</file>
+</verify>

neo/curl/tests/data/test39

@@ -0,0 +1,76 @@
+# Server-side
+<reply>
+<data>
+HTTP/1.1 200 OK
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake
+Content-Length: 10
+
+blablabla
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP RFC1867-type formposting with filename= and type=
+ </name>
+ <command>
+http://%HOSTIP:%HOSTPORT/we/want/39 -F name=daniel -F tool=curl -F "file=@log/test39.txt;filename=fakerfile;type=moo/foobar" -F file2=@log/test39.txt
+</command>
+# We create this file before the command is invoked!
+<file name="log/test39.txt">
+foo bar
+This is a bar foo
+bar
+foo
+</file>
+</test>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^(User-Agent:|Content-Type: multipart/form-data;|-------).*
+</strip>
+<protocol>
+POST /we/want/39 HTTP/1.1
+User-Agent: curl/7.10.4 (i686-pc-linux-gnu) libcurl/7.10.4 OpenSSL/0.9.7a ipv6 zlib/1.1.3
+Host: 127.0.0.1:8999
+Pragma: no-cache
+Accept: */*
+Content-Length: 598
+Expect: 100-continue
+Content-Type: multipart/form-data; boundary=----------------------------24e78000bd32
+
+------------------------------24e78000bd32
+Content-Disposition: form-data; name="name"
+
+daniel
+------------------------------24e78000bd32
+Content-Disposition: form-data; name="tool"
+
+curl
+------------------------------24e78000bd32
+Content-Disposition: form-data; name="file"; filename="fakerfile"
+Content-Type: moo/foobar
+
+foo bar
+This is a bar foo
+bar
+foo
+
+------------------------------24e78000bd32
+Content-Disposition: form-data; name="file2"; filename="log/test39.txt"
+Content-Type: text/plain
+
+foo bar
+This is a bar foo
+bar
+foo
+
+------------------------------24e78000bd32--
+</protocol>
+</verify>

neo/curl/tests/data/test4

@@ -0,0 +1,42 @@
+#
+# Server-side
+<reply name="1">
+<data>
+HTTP/1.1 200 OK
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Server: test-server/fake swsclose
+Content-Type: text/html
+Funny-head: yesyes
+
+</data>
+</reply>
+
+#
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+Replaced internal and added custom HTTP headers
+ </name>
+ <command>
+ -H "extra-header: here" -H "Accept: replaced" http://%HOSTIP:%HOSTPORT/4
+</command>
+</test>
+
+#
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /4 HTTP/1.1
+Host: 127.0.0.1:8999
+Pragma: no-cache
+extra-header: here
+Accept: replaced
+
+</protocol>
+</verify>