Remove getters/setters for frequency from Physics joints

src/modules/physics/box2d/DistanceJoint.cpp

@@ -56,34 +56,6 @@ float DistanceJoint::getLength() const
 	return Physics::scaleUp(joint->GetLength());
 }
 
-void DistanceJoint::setFrequency(float hz)
-{
-	float stiffness, damping;
-	b2LinearStiffness(stiffness, damping, hz, getDampingRatio(), joint->GetBodyA(), joint->GetBodyB());
-	joint->SetStiffness(stiffness);
-}
-
-float DistanceJoint::getFrequency() const
-{
-	float frequency, ratio;
-	Physics::b2LinearFrequency(frequency, ratio, joint->GetStiffness(), joint->GetDamping(), joint->GetBodyA(), joint->GetBodyB());
-	return frequency;
-}
-
-void DistanceJoint::setDampingRatio(float ratio)
-{
-	float stiffness, damping;
-	b2LinearStiffness(stiffness, damping, getFrequency(), ratio, joint->GetBodyA(), joint->GetBodyB());
-	joint->SetDamping(damping);
-}
-
-float DistanceJoint::getDampingRatio() const
-{
-	float frequency, ratio;
-	Physics::b2LinearFrequency(frequency, ratio, joint->GetStiffness(), joint->GetDamping(), joint->GetBodyA(), joint->GetBodyB());
-	return ratio;
-}
-
 void DistanceJoint::setStiffness(float k)
 {
 	joint->SetStiffness(k);

src/modules/physics/box2d/DistanceJoint.h

@@ -56,26 +56,6 @@ public:
 	 **/
 	float getLength() const;
 
-	/**
-	 * Sets the response speed. Independent of mass
-	 **/
-	void setFrequency(float hz);
-
-	/**
-	 * Gets the response speed. Independent of mass
-	 **/
-	float getFrequency() const;
-
-	/**
-	 * Set the spring damping ratio. Independent of mass
-	 **/
-	void setDampingRatio(float ratio);
-
-	/**
-	 * Get the spring damping ratio. Independent of mass
-	 **/
-	float getDampingRatio() const;
-
 	/**
 	 * Sets the response speed. Dependent of mass
 	 **/

src/modules/physics/box2d/MouseJoint.cpp

@@ -49,7 +49,7 @@ MouseJoint::MouseJoint(Body *body1, float x, float y)
 	def.bodyB = body1->body;
 	def.maxForce = 1000.0f * body1->body->GetMass();
 	def.target = Physics::scaleDown(b2Vec2(x,y));
-	b2LinearStiffness(def.stiffness, def.damping, 5.0f, 0.7f, def.bodyA, def.bodyB);
+	Physics::computeLinearStiffness(def.stiffness, def.damping, 5.0, 0.7, def.bodyA, def.bodyB);
 	joint = (b2MouseJoint *)createJoint(&def);
 }
 
@@ -79,40 +79,6 @@ float MouseJoint::getMaxForce() const
 	return Physics::scaleUp(joint->GetMaxForce());
 }
 
-void MouseJoint::setFrequency(float hz)
-{
-	// This is kind of a crappy check. The Stiffness is used in an internal
-	// box2d calculation whose result must be > FLT_EPSILON, but other variables
-	// go into that calculation...
-	if (hz <= FLT_EPSILON * 2)
-		throw love::Exception("MouseJoint Stiffness must be a positive number.");
-
-	float stiffness, damping;
-	b2LinearStiffness(stiffness, damping, hz, getDampingRatio(), joint->GetBodyA(), joint->GetBodyB());
-	joint->SetStiffness(stiffness);
-}
-
-float MouseJoint::getFrequency() const
-{
-	float frequency, ratio;
-	Physics::b2LinearFrequency(frequency, ratio, joint->GetStiffness(), joint->GetDamping(), joint->GetBodyA(), joint->GetBodyB());
-	return frequency;
-}
-
-void MouseJoint::setDampingRatio(float ratio)
-{
-	float stiffness, damping;
-	b2LinearStiffness(stiffness, damping, getFrequency(), ratio, joint->GetBodyA(), joint->GetBodyB());
-	joint->SetDamping(damping);
-}
-
-float MouseJoint::getDampingRatio() const
-{
-	float frequency, ratio;
-	Physics::b2LinearFrequency(frequency, ratio, joint->GetStiffness(), joint->GetDamping(), joint->GetBodyA(), joint->GetBodyB());
-	return ratio;
-}
-
 void MouseJoint::setStiffness(float k)
 {
 	// This is kind of a crappy check. The Stiffness is used in an internal

src/modules/physics/box2d/Physics.cpp

@@ -405,7 +405,12 @@ b2AABB Physics::scaleUp(const b2AABB &aabb)
 	return t;
 }
 
-void Physics::b2LinearFrequency(float& frequency, float& ratio, float stiffness, float damping, b2Body* bodyA, b2Body* bodyB)
+void Physics::computeLinearStiffness(float &stiffness, float &damping, float frequency, float dampingRatio, b2Body *bodyA, b2Body *bodyB)
+{
+	b2LinearStiffness(stiffness, damping, frequency, dampingRatio, bodyA, bodyB);
+}
+
+void Physics::computeLinearFrequency(float &frequency, float &ratio, float stiffness, float damping, b2Body *bodyA, b2Body *bodyB)
 {
 	float massA = bodyA->GetMass();
 	float massB = bodyB->GetMass();
@@ -435,7 +440,12 @@ void Physics::b2LinearFrequency(float& frequency, float& ratio, float stiffness,
 	ratio = damping / (mass * 2.0f * omega);
 }
 
-void Physics::b2AngularFrequency(float& frequency, float& ratio, float stiffness, float damping, b2Body* bodyA, b2Body* bodyB)
+void Physics::computeAngularStiffness(float &stiffness, float &damping, float frequency, float dampingRatio, b2Body *bodyA, b2Body *bodyB)
+{
+	b2AngularStiffness(stiffness, damping, frequency, dampingRatio, bodyA, bodyB);
+}
+
+void Physics::computeAngularFrequency(float &frequency, float &ratio, float stiffness, float damping, b2Body *bodyA, b2Body *bodyB)
 {
 	float IA = bodyA->GetInertia();
 	float IB = bodyB->GetInertia();

src/modules/physics/box2d/Physics.h

@@ -360,18 +360,18 @@ public:
 	static b2AABB scaleUp(const b2AABB& aabb);
 
 	/**
-	 * Calculates linear frequency and damping radio from stiffness and damping
+	 * Calculates the stiffness and damping, given the linear frequency, and damping ratio.
-	 * @param frequency The output frequency
+	 * @param stiffness The output stiffness
-	 * @param ratio The output damping ratio
+	 * @param damping The output damping
-	 * @param stiffness The joint stiffness
+	 * @param frequency The joint linear frequency
-	 * @param damping The joint damping
+	 * @param dampingRatio The joint damping ratio
 	 * @param bodyA The bodyA of the joint
 	 * @param bodyB The bodyB of the joint
 	 **/
-	static void b2LinearFrequency(float& frequency, float& ratio, float stiffness, float damping, b2Body* bodyA, b2Body* bodyB);
+	static void computeLinearStiffness(float& stiffness, float& damping, float frequency, float dampingRatio, b2Body* bodyA, b2Body* bodyB);
 
 	/**
-	 * Calculates angular frequency and damping radio from stiffness and damping
+	 * Calculates linear frequency and damping ratio from stiffness and damping
 	 * @param frequency The output frequency
 	 * @param ratio The output damping ratio
 	 * @param stiffness The joint stiffness
@@ -379,7 +379,29 @@ public:
 	 * @param bodyA The bodyA of the joint
 	 * @param bodyB The bodyB of the joint
 	 **/
-	static void b2AngularFrequency(float& frequency, float& ratio, float stiffness, float damping, b2Body* bodyA, b2Body* bodyB);
+	static void computeLinearFrequency(float &frequency, float &ratio, float stiffness, float damping, b2Body *bodyA, b2Body *bodyB);
+
+	/**
+	 * Calculates the stiffness and damping, given the angular frequency, and damping ratio.
+	 * @param stiffness The output stiffness
+	 * @param damping The output damping
+	 * @param frequency The joint angular frequency
+	 * @param dampingRatio The joint damping ratio
+	 * @param bodyA The bodyA of the joint
+	 * @param bodyB The bodyB of the joint
+	 **/
+	static void computeAngularStiffness(float &stiffness, float &damping, float frequency, float dampingRatio, b2Body *bodyA, b2Body *bodyB);
+
+	/**
+	 * Calculates angular frequency and damping ratio from stiffness and damping
+	 * @param frequency The output frequency
+	 * @param ratio The output damping ratio
+	 * @param stiffness The joint stiffness
+	 * @param damping The joint damping
+	 * @param bodyA The bodyA of the joint
+	 * @param bodyB The bodyB of the joint
+	 **/
+	static void computeAngularFrequency(float &frequency, float &ratio, float stiffness, float damping, b2Body *bodyA, b2Body *bodyB);
 
 private:
 

src/modules/physics/box2d/WeldJoint.cpp

@@ -66,34 +66,6 @@ void WeldJoint::init(b2WeldJointDef &def, Body *body1, Body *body2, float xA, fl
 	def.collideConnected = collideConnected;
 }
 
-void WeldJoint::setFrequency(float hz)
-{
-	float stiffness, damping;
-	b2LinearStiffness(stiffness, damping, hz, getDampingRatio(), joint->GetBodyA(), joint->GetBodyB());
-	joint->SetStiffness(stiffness);
-}
-
-float WeldJoint::getFrequency() const
-{
-	float frequency, ratio;
-	Physics::b2LinearFrequency(frequency, ratio, joint->GetStiffness(), joint->GetDamping(), joint->GetBodyA(), joint->GetBodyB());
-	return frequency;
-}
-
-void WeldJoint::setDampingRatio(float ratio)
-{
-	float stiffness, damping;
-	b2LinearStiffness(stiffness, damping, getFrequency(), ratio, joint->GetBodyA(), joint->GetBodyB());
-	joint->SetDamping(damping);
-}
-
-float WeldJoint::getDampingRatio() const
-{
-	float frequency, ratio;
-	Physics::b2LinearFrequency(frequency, ratio, joint->GetStiffness(), joint->GetDamping(), joint->GetBodyA(), joint->GetBodyB());
-	return ratio;
-}
-
 void WeldJoint::setStiffness(float k)
 {
 	joint->SetStiffness(k);

src/modules/physics/box2d/WeldJoint.h

@@ -49,26 +49,6 @@ public:
 
 	virtual ~WeldJoint();
 
-	/**
-	 * Sets the response speed. Independent of mass
-	 **/
-	void setFrequency(float hz);
-
-	/**
-	 * Gets the response speed. Independent of mass
-	 **/
-	float getFrequency() const;
-
-	/**
-	 * Set the spring damping ratio. Independent of mass
-	 **/
-	void setDampingRatio(float ratio);
-
-	/**
-	 * Get the spring damping ratio. Independent of mass
-	 **/
-	float getDampingRatio() const;
-
 	/**
 	 * Sets the response speed. Dependent of mass
 	 **/

src/modules/physics/box2d/WheelJoint.cpp

@@ -95,34 +95,6 @@ float WheelJoint::getMotorTorque(float inv_dt) const
 	return Physics::scaleUp(Physics::scaleUp(joint->GetMotorTorque(inv_dt)));
 }
 
-void WheelJoint::setFrequency(float hz)
-{
-	float stiffness, damping;
-	b2AngularStiffness(stiffness, damping, hz, getDampingRatio(), joint->GetBodyA(), joint->GetBodyB());
-	joint->SetStiffness(stiffness);
-}
-
-float WheelJoint::getFrequency() const
-{
-	float frequency, ratio;
-	Physics::b2AngularFrequency(frequency, ratio, joint->GetStiffness(), joint->GetDamping(), joint->GetBodyA(), joint->GetBodyB());
-	return frequency;
-}
-
-void WheelJoint::setDampingRatio(float ratio)
-{
-	float stiffness, damping;
-	b2AngularStiffness(stiffness, damping, getFrequency(), ratio, joint->GetBodyA(), joint->GetBodyB());
-	joint->SetDamping(damping);
-}
-
-float WheelJoint::getDampingRatio() const
-{
-	float frequency, ratio;
-	Physics::b2AngularFrequency(frequency, ratio, joint->GetStiffness(), joint->GetDamping(), joint->GetBodyA(), joint->GetBodyB());
-	return ratio;
-}
-
 void WheelJoint::setStiffness(float k)
 {
 	joint->SetStiffness(k);

src/modules/physics/box2d/WheelJoint.h

@@ -95,26 +95,6 @@ public:
 	 **/
 	float getMotorTorque(float inv_dt) const;
 
-	/**
-	 * Sets the response speed. Independent of mass
-	 **/
-	void setFrequency(float hz);
-
-	/**
-	 * Gets the response speed. Independent of mass
-	 **/
-	float getFrequency() const;
-
-	/**
-	 * Set the spring damping ratio. Independent of mass
-	 **/
-	void setDampingRatio(float ratio);
-
-	/**
-	 * Get the spring damping ratio. Independent of mass
-	 **/
-	float getDampingRatio() const;
-
 	/**
 	 * Sets the response speed. Dependent of mass
 	 **/

src/modules/physics/box2d/wrap_DistanceJoint.cpp

@@ -50,36 +50,6 @@ int w_DistanceJoint_getLength(lua_State *L)
 	return 1;
 }
 
-int w_DistanceJoint_setFrequency(lua_State *L)
-{
-	DistanceJoint *t = luax_checkdistancejoint(L, 1);
-	float arg1 = (float)luaL_checknumber(L, 2);
-	t->setFrequency(arg1);
-	return 0;
-}
-
-int w_DistanceJoint_getFrequency(lua_State *L)
-{
-	DistanceJoint *t = luax_checkdistancejoint(L, 1);
-	lua_pushnumber(L, t->getFrequency());
-	return 1;
-}
-
-int w_DistanceJoint_setDampingRatio(lua_State *L)
-{
-	DistanceJoint *t = luax_checkdistancejoint(L, 1);
-	float arg1 = (float)luaL_checknumber(L, 2);
-	t->setDampingRatio(arg1);
-	return 0;
-}
-
-int w_DistanceJoint_getDampingRatio(lua_State *L)
-{
-	DistanceJoint *t = luax_checkdistancejoint(L, 1);
-	lua_pushnumber(L, t->getDampingRatio());
-	return 1;
-}
-
 int w_DistanceJoint_setStiffness(lua_State *L)
 {
 	DistanceJoint *t = luax_checkdistancejoint(L, 1);
@@ -114,10 +84,6 @@ static const luaL_Reg w_DistanceJoint_functions[] =
 {
 	{ "setLength", w_DistanceJoint_setLength },
 	{ "getLength", w_DistanceJoint_getLength },
-	{ "setFrequency", w_DistanceJoint_setFrequency },
-	{ "getFrequency", w_DistanceJoint_getFrequency },
-	{ "setDampingRatio", w_DistanceJoint_setDampingRatio },
-	{ "getDampingRatio", w_DistanceJoint_getDampingRatio },
 	{ "setStiffness", w_DistanceJoint_setStiffness },
 	{ "getStiffness", w_DistanceJoint_getStiffness },
 	{ "setDamping", w_DistanceJoint_setDamping },

src/modules/physics/box2d/wrap_MouseJoint.cpp

@@ -66,36 +66,6 @@ int w_MouseJoint_getMaxForce(lua_State *L)
 	return 1;
 }
 
-int w_MouseJoint_setFrequency(lua_State *L)
-{
-	MouseJoint *t = luax_checkmousejoint(L, 1);
-	float arg1 = (float)luaL_checknumber(L, 2);
-	luax_catchexcept(L, [&]() { t->setFrequency(arg1); });
-	return 0;
-}
-
-int w_MouseJoint_getFrequency(lua_State *L)
-{
-	MouseJoint *t = luax_checkmousejoint(L, 1);
-	lua_pushnumber(L, t->getFrequency());
-	return 1;
-}
-
-int w_MouseJoint_setDampingRatio(lua_State *L)
-{
-	MouseJoint *t = luax_checkmousejoint(L, 1);
-	float arg1 = (float)luaL_checknumber(L, 2);
-	t->setDampingRatio(arg1);
-	return 0;
-}
-
-int w_MouseJoint_getDampingRatio(lua_State *L)
-{
-	MouseJoint *t = luax_checkmousejoint(L, 1);
-	lua_pushnumber(L, t->getDampingRatio());
-	return 1;
-}
-
 int w_MouseJoint_setStiffness(lua_State *L)
 {
 	MouseJoint *t = luax_checkmousejoint(L, 1);
@@ -132,10 +102,6 @@ static const luaL_Reg w_MouseJoint_functions[] =
 	{ "getTarget", w_MouseJoint_getTarget },
 	{ "setMaxForce", w_MouseJoint_setMaxForce },
 	{ "getMaxForce", w_MouseJoint_getMaxForce },
-	{ "setFrequency", w_MouseJoint_setFrequency },
-	{ "getFrequency", w_MouseJoint_getFrequency },
-	{ "setDampingRatio", w_MouseJoint_setDampingRatio },
-	{ "getDampingRatio", w_MouseJoint_getDampingRatio },
 	{ "setStiffness", w_MouseJoint_setStiffness },
 	{ "getStiffness", w_MouseJoint_getStiffness },
 	{ "setDamping", w_MouseJoint_setDamping },

src/modules/physics/box2d/wrap_Physics.cpp

@@ -477,12 +477,97 @@ int w_setMeter(lua_State *L)
 	return 0;
 
 }
+
 int w_getMeter(lua_State *L)
 {
 	lua_pushinteger(L, Physics::getMeter());
 	return 1;
 }
 
+int w_computeLinearStiffness(lua_State *L)
+{
+	float frequency = (float)luaL_checknumber(L, 1);
+	float dampingRatio = (float)luaL_checknumber(L, 2);
+	Body *body1 = luax_checkbody(L, 3);
+	b2Body *other = 0;
+
+	if (lua_isnoneornil(L, 4))
+		other = body1->getWorld()->getGroundBody();
+	else
+		other = luax_checkbody(L, 4)->body;
+
+	float stiffness, damping;
+	Physics::computeLinearStiffness(stiffness, damping, frequency, dampingRatio, body1->body, other);
+
+	lua_pushnumber(L, stiffness);
+	lua_pushnumber(L, damping);
+
+	return 2;
+}
+
+int w_computeLinearFrequency(lua_State *L)
+{
+	float stiffness = (float)luaL_checknumber(L, 1);
+	float damping = (float)luaL_checknumber(L, 2);
+	Body *body1 = luax_checkbody(L, 3);
+	b2Body *other = 0;
+
+	if (lua_isnoneornil(L, 4))
+		other = body1->getWorld()->getGroundBody();
+	else
+		other = luax_checkbody(L, 4)->body;
+
+	float frequency, dampingRatio;
+	Physics::computeLinearFrequency(frequency, dampingRatio, stiffness, damping, body1->body, other);
+
+	lua_pushnumber(L, frequency);
+	lua_pushnumber(L, dampingRatio);
+
+	return 2;
+}
+
+int w_computeAngularStiffness(lua_State *L)
+{
+	float frequency = (float)luaL_checknumber(L, 1);
+	float dampingRatio = (float)luaL_checknumber(L, 2);
+	Body *body1 = luax_checkbody(L, 3);
+	b2Body *other = 0;
+
+	if (lua_isnoneornil(L, 4))
+		other = body1->getWorld()->getGroundBody();
+	else
+		other = luax_checkbody(L, 4)->body;
+
+	float stiffness, damping;
+	Physics::computeAngularStiffness(stiffness, damping, frequency, dampingRatio, body1->body, other);
+
+	lua_pushnumber(L, stiffness);
+	lua_pushnumber(L, damping);
+
+	return 2;
+}
+
+int w_computeAngularFrequency(lua_State *L)
+{
+	float stiffness = (float)luaL_checknumber(L, 1);
+	float damping = (float)luaL_checknumber(L, 2);
+	Body *body1 = luax_checkbody(L, 3);
+	b2Body *other = 0;
+
+	if (lua_isnoneornil(L, 4))
+		other = body1->getWorld()->getGroundBody();
+	else
+		other = luax_checkbody(L, 4)->body;
+
+	float frequency, dampingRatio;
+	Physics::computeAngularFrequency(frequency, dampingRatio, stiffness, damping, body1->body, other);
+
+	lua_pushnumber(L, frequency);
+	lua_pushnumber(L, dampingRatio);
+
+	return 2;
+}
+
 // List of functions to wrap.
 static const luaL_Reg functions[] =
 {
@@ -508,6 +593,10 @@ static const luaL_Reg functions[] =
 	{ "getDistance", w_getDistance },
 	{ "getMeter", w_getMeter },
 	{ "setMeter", w_setMeter },
+	{ "computeLinearStiffness", w_computeLinearStiffness },
+	{ "computeLinearFrequency", w_computeLinearFrequency },
+	{ "computeAngularStiffness", w_computeAngularStiffness },
+	{ "computeAngularFrequency", w_computeAngularFrequency },
 	{ 0, 0 },
 };
 

src/modules/physics/box2d/wrap_WeldJoint.cpp

@@ -35,36 +35,6 @@ WeldJoint *luax_checkweldjoint(lua_State *L, int idx)
 	return j;
 }
 
-int w_WeldJoint_setFrequency(lua_State *L)
-{
-	WeldJoint *t = luax_checkweldjoint(L, 1);
-	float arg1 = (float)luaL_checknumber(L, 2);
-	t->setFrequency(arg1);
-	return 0;
-}
-
-int w_WeldJoint_getFrequency(lua_State *L)
-{
-	WeldJoint *t = luax_checkweldjoint(L, 1);
-	lua_pushnumber(L, t->getFrequency());
-	return 1;
-}
-
-int w_WeldJoint_setDampingRatio(lua_State *L)
-{
-	WeldJoint *t = luax_checkweldjoint(L, 1);
-	float arg1 = (float)luaL_checknumber(L, 2);
-	t->setDampingRatio(arg1);
-	return 0;
-}
-
-int w_WeldJoint_getDampingRatio(lua_State *L)
-{
-	WeldJoint *t = luax_checkweldjoint(L, 1);
-	lua_pushnumber(L, t->getDampingRatio());
-	return 1;
-}
-
 int w_WeldJoint_setStiffness(lua_State *L)
 {
 	WeldJoint *t = luax_checkweldjoint(L, 1);
@@ -104,10 +74,6 @@ int w_WeldJoint_getReferenceAngle(lua_State *L)
 
 static const luaL_Reg w_WeldJoint_functions[] =
 {
-	{ "setFrequency", w_WeldJoint_setFrequency },
-	{ "getFrequency", w_WeldJoint_getFrequency },
-	{ "setDampingRatio", w_WeldJoint_setDampingRatio },
-	{ "getDampingRatio", w_WeldJoint_getDampingRatio },
 	{ "setStiffness", w_WeldJoint_setStiffness },
 	{ "getStiffness", w_WeldJoint_getStiffness },
 	{ "setDamping", w_WeldJoint_setDamping },

src/modules/physics/box2d/wrap_WheelJoint.cpp

@@ -102,36 +102,6 @@ int w_WheelJoint_getMotorTorque(lua_State *L)
 	return 1;
 }
 
-int w_WheelJoint_setFrequency(lua_State *L)
-{
-	WheelJoint *t = luax_checkwheeljoint(L, 1);
-	float arg1 = (float)luaL_checknumber(L, 2);
-	t->setFrequency(arg1);
-	return 0;
-}
-
-int w_WheelJoint_getFrequency(lua_State *L)
-{
-	WheelJoint *t = luax_checkwheeljoint(L, 1);
-	lua_pushnumber(L, t->getFrequency());
-	return 1;
-}
-
-int w_WheelJoint_setDampingRatio(lua_State *L)
-{
-	WheelJoint *t = luax_checkwheeljoint(L, 1);
-	float arg1 = (float)luaL_checknumber(L, 2);
-	t->setDampingRatio(arg1);
-	return 0;
-}
-
-int w_WheelJoint_getDampingRatio(lua_State *L)
-{
-	WheelJoint *t = luax_checkwheeljoint(L, 1);
-	lua_pushnumber(L, t->getDampingRatio());
-	return 1;
-}
-
 int w_WheelJoint_setStiffness(lua_State *L)
 {
 	WheelJoint *t = luax_checkwheeljoint(L, 1);
@@ -180,18 +150,10 @@ static const luaL_Reg w_WheelJoint_functions[] =
 	{ "setMaxMotorTorque", w_WheelJoint_setMaxMotorTorque },
 	{ "getMaxMotorTorque", w_WheelJoint_getMaxMotorTorque },
 	{ "getMotorTorque", w_WheelJoint_getMotorTorque },
-	{ "setSpringFrequency", w_WheelJoint_setFrequency },
-	{ "getSpringFrequency", w_WheelJoint_getFrequency },
-	{ "setSpringDampingRatio", w_WheelJoint_setDampingRatio },
-	{ "getSpringDampingRatio", w_WheelJoint_getDampingRatio },
 	{ "setSpringStiffness", w_WheelJoint_setStiffness },
 	{ "getSpringStiffness", w_WheelJoint_getStiffness },
 	{ "setSpringDamping", w_WheelJoint_setDamping },
 	{ "getSpringDamping", w_WheelJoint_getDamping },
-	{ "setFrequency", w_WheelJoint_setFrequency },
-	{ "getFrequency", w_WheelJoint_getFrequency },
-	{ "setDampingRatio", w_WheelJoint_setDampingRatio },
-	{ "getDampingRatio", w_WheelJoint_getDampingRatio },
 	{ "setStiffness", w_WheelJoint_setStiffness },
 	{ "getStiffness", w_WheelJoint_getStiffness },
 	{ "setDamping", w_WheelJoint_setDamping },